Brake hose kit for Mehari with disc brakes

Details about : Brake hose kit for Mehari with disc brakes

This brake hose kit for Meharis with disc brakes is higher quality than the original.

This set of rigid brake hoses is made of copper. It is compatible with all models with a front disc brake system from June 1978.
The high quality copper hoses are the exact length of the original equipment and will require shaping before fitting.

All circuit connections through connection ends to the master cylinder and wheel cylinder can be fitted with an 8 mm spanner.

This package includes:
- the connecting pipes for the front callipers
- the 2 connection pipes for the rear drums
- the intermediate pipe from the master cylinder to the front
- the intermediate pipe from the master cylinder to the rear
- 16 x 3.5 mm barrel seals for "green" LHM brake fluid

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.