Check out our gift ideas for the festive season! 🎁
14,15 €
ATI FEBI G11 concentrated coolant can be diluted with demineralized water according to the degree of cold protection required. Its formula is based on monoethylene glycol with silicate ( inorganic IAT technology, without nitrite, amine or phosphate).
In stock
In stock
Delivery mode
Collect at store Wambrechies (France) : Free
Home delivery : 54.00€
Sent by MECATECHNIC on: Friday, December 20, 2024
Description Product
FEBI G11 concentrated coolant can be diluted with demineralized water according to the degree of cold protection required. Its formula is based on monoethylene glycol with silicate ( inorganic IAT technology, without nitrite, amine or phosphate).
This G11 anti-corrosion and anti-freeze agent is recommended for the cooling systems of VAG Group cars(Volkswagen, Seat, Skoda, Audi, Porsche...) manufactured up to 1996. It is particularly suitable for older cast-iron engines with copper or brass radiators and heater radiators, notably because of their lead soldering.
Dilution examples:
- 1 can 1.5L antifreeze 1.5L water = 3L maximum protection at -37° C
- 1 can 1.5L antifreeze 2.25L water = 3.75L maximum protection at -27° C
- 2 cans 1.5L antifreeze 3L water = 4.5L maximum protection at -20° C
Advantages :
- Creates protection for surfaces, preventing ethylene glycol from damaging them.
- Slows the spread of corrosion.
- Protects against deposits and foaming.
- Ensures ideal heat dissipation.
- Anti-cavitation properties.
WARNING: Not recommended for vehicles with aluminum cylinder blocks and radiators, as G11 cannot protect them at high temperatures!
INFORMATION: G11 can be mixed with G12 , G12 and G13 but with deterioration of corrosion protection. It is incompatible with organic OAT-based G12. Its service life is short: replace every 3 to 4 years or 60 to 85,000km.
We recommend that you check and follow the manufacturer's recommendations for your vehicle.
Please observe all safety precautions.
Color : red
Technologie de liquide de refroidissement
IAT
Mark
Febi Bilstein
Norme d'huile
Homologation constructeur
, , , , ,
Color
Blue
Capacity (l)
1.5
Customer review
No commentary about the product
Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website
Your questions