7,75 €
ATIThis front brake hose on box for 2cv Van (10/1967-09/1972) - 4. 5mm is a higher quality than the original.
This front brake hose on box for 2CV Van in 4. 5mm is compatible with assemblies requiring a 9 wrench.
It was used on the fol...
Out of stock from our supplier
Out of stock from our supplier
Delivery mode
Collect at store Wambrechies (France) : Free
Home delivery : 39.00€
Description Product
This front brake hose on box for 2cv Van (10/1967-09/1972) - 4.5mm is a higher quality than the original.
This front brake hose on box for 2CV Van in 4.5mm is compatible with assemblies requiring a 9 wrench.
It was used on the following 2CV Fourgonnette models:
- 2CV AK350 (10/1967-02/1970)
- 2CV AZU-A (03/1968-09/1972)It succeeded the intermediate mounting using banjos for the front brakes, and was replaced from June 1970 by a complete system in 3.5mm and 8 wrench.
Caution!!! your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.
Length (mm)
400
Diameter (mm)
4.5
Matériau
Cuivre
Filetage (métrique)
M9 x 1.25
Norme de liquide de frein
DOT 4 , DOT 5
Customer review
No commentary about the product
Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website
Your questions
Vehicle compatibility