GRIPPER PLATE access ramps for MILENCO holds - Par 2

Details about : GRIPPER PLATE access ramps for MILENCO holds - Par 2

The new access ramps for MILENCO chocks (Triple, Quattro and Trident) facilitate climbing on particularly slippery and smooth surfaces. Positioned at the base of the chock, they improve the tire's grip, allowing it to climb onto the first step of the chock, thus avoiding slippage. They fit perfectly into the honeycomb structure of the chocks to stay in place when maneuvering. They also enable chocks to be linked with MILENCO de-airing grids.

Dimensions : L: 23 cm; W: 19 cm

MILENCO ref : M2202.

We recommend the use of an optional spirit level.
Milenco shims, although very sturdy, are not indestructible. The stresses to which they are subjected are considerable, so they must be used as recommended.
For a well-positioned tire on the chock:
- No run-up when climbing
- Keep the tire centered and do not turn the wheels on the chock.
Incorrect use may result in localized deformation of the chock. This is not a defect in the chock, and in no way affects its strength. The plastic simply reacts to the stresses exerted by the tire
DO NOT
-Don't go over the wedge: be careful when reaching the last levels.
- Don't stack them or use them upside down (full sole upwards): this mistake is often made the first time you use them, as other chocks are used in this way.
-Never place the wedge on a hard point (stone, root...): a hard point on the first level and the bottom edge could break, a hard point elsewhere and it could pierce the solid sole.

Original reference OEM:

Milenco M2202