MTS TECHNIK Street Series threaded combination kit for BMW 5 Series E28 (09/1980-12/1987) - strut 55mm

Details about : MTS TECHNIK Street Series threaded combination kit for BMW 5 Series E28 (09/1980-12/1987) - strut 55mm

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 series E28 4 and 6 cylinders with standard chassis or sport suspension and 55 mm diameter strut:

- 518 man. 4cyl carbu 90hp from 11/1980 to 09/1984 (engine code M10B18)
- 518i 4cyl 105hp from 05/1981 to 12/1987 (engine code M10B18)
- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7L 125hp from 11/1982 to 12/1987 (engine code M20B27)
- 525i 6cyl 150hp from 02/1981 to 11/1987 (engine code M30B25)
- 528i 6cyl 184hp from 09/1980 to 12/1987 (engine code M30B28)
- 535i 6cyl 3.4L 218hp from 12/1984 to 12/1987 (engine code M30B34)
- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)
- 524td 6cyl 115hp from 10/1982 to 12/1987 (engine code M21D24T)

ATTENTION: Not suitable for M5 and M535i with M-Tech body kit or for models with air suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -110mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -25mm to -90mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E28 the best, with a top-quality MTS TECHNIK kit!