Back
Catégories
Autres catégories
Automotive magazine
Automotive tools
Bulbs
Car cleaning
Fasteners and hardware
Generic tools
Gift ideas
Greases
Motorcycle parts
Textile snow chain
Workshop tools
Back
Favorite brands
Other Brands
Our models
VW Cox
VW Golf 1
VW Golf 2
VW Golf 3
VW Golf 4
VW Transporter T6
VW golf 5
VW golf 6
VW Transporter T25 - T3
VW Transporter T4
VW Transporter T5
BMW e46
Porsche 911
Audi A3 8P
BMW e30
BMW e36
BMW e10
BMW e34
Peugeot 205
Renault 4L
Citroën 2 CV
Français
Español
English
Italiano
Português
Nederlands
Deutsch
1,75 €
ATIThis fitting can be used to vent the fuel system or to connect hoses to the windshield washer system.
For the fuel system :
A plastic T-fitting for the fuel tank vent circuit is a component used to connect multiple hoses in a vent or vacuum s...
In stock
In stock
Delivery mode
Collect at store Wambrechies (France) : Free
Home delivery : 39.00€
Sent today by MECATECHNIC if ordered before 15h00
Description Product
This fitting can be used to vent the fuel system or to connect hoses to the windshield washer system.
For the fuel system :
A plastic T-fitting for the fuel tank vent circuit is a component used to connect multiple hoses in a vent or vacuum system, often as part of the fuel tank vent system. This fitting distributes air or gases efficiently, ensuring proper ventilation of the tank and avoiding excessive pressures that could lead to malfunctions or leaks.
The T-connector is used to connect various fuel tank venting and venting hoses, enabling the evacuation of fuel vapors to be managed while maintaining adequate pressure inside the tank.
In a fuel tank, it's crucial that air can flow in and out to compensate for changes in fuel volume, especially as the fuel is consumed or as a result of temperature variations. The T-connector can be used to connect different ventilation or venting lines.
Before installing a new fitting, carefully disconnect existing hoses to avoid leaks or fire hazards (be sure to turn off the fuel supply and take safety precautions).
Insert the hoses into the three openings of the T-connector. Use hose clamps to ensure tight connections.
Once the fitting has been installed, check for leaks by testing with a little pressure (by gently squeezing the hoses or activating the fuel pump) to ensure that the venting system is working properly.
For windshield washer system :
A washer circuit T-fitting is used to divide or connect multiple hoses in your vehicle's window washing system, allowing washer fluid to be distributed to different points on the vehicle (often the front and rear wipers or washer nozzles).
It can be used to distribute washer fluid evenly to several nozzles, or to connect different sections of the washer system. For example, a T-connector can be used to connect a main hose running from the washer reservoir to the two hoses feeding the front wiper nozzles.
As it is located in a pressurized circuit, the T-connector must be tightly sealed to prevent washer fluid leaks.
Before starting to change the T-connector, it's important to turn off the power to the windshield washer system and empty the washer fluid reservoir to avoid leaks from the T-connector.
If you are replacing a faulty T-connector, disconnect the hoses and carefully remove it. If hose clamps are used, unscrew them to release the hoses.
Insert the pipes into the new T-connector. If necessary, use hose clamps to ensure a firm, tight fit. Make sure that the pipes are fully inserted into the holes in the fitting to avoid any liquid leaks.
Once the T-connector has been installed, check that the system is watertight by switching on the windshield washer to ensure that there are no leaks and that the fluid is evenly distributed to the nozzles.
External diameter: 5 mm
For 4 to 6 mm hose
Original reference OEM:
113 201 943B
AC129290
Customer review
4.7
112 Feedback
5
85 Feedback
4
21 Feedback
3
4 Feedback
2
1 Feedback
1
1 Feedback
Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website
18,25 €
ATIOnly 2 in stock
Straight aluminium fitting for water hose - 28 x 75 mm
ref: UC19040
17,05 €
ATI4,5
In stock
Elbow quick connectors 9.49 x 8 mm
ref: TB04765
2,05 €
ATI4,6
In stock
1 "T"-piece for the ventilation of the fuel circuit
ref: UC47111
3,95 €
ATI4,4
In stock
Plastic connectors - 8mm - set of 8
ref: UO99820Secure payment :
© Copyrights 2013-2025, Mecatechnic.com
