123 IGNITION electronic ignition distributor for Porsche 356 (1950-1965) - with vacuum

Details about : 123 IGNITION electronic ignition distributor for Porsche 356 (1950-1965) - with vacuum

123 IGNITION electronic igniter for all Porsche 356 with igniter with vacuum capsule :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

It is designed to work equally well with a 6V or a 12V assembly.
You can select, depending on your engine, one of the 16 parameterized curves.

The installation manual, in French, supplied with the igniter, also shows the correspondence between the original Bosch igniter references and the curve to be selected on your 123 IGNITION igniter.

For the ignition coil : the resistance of your original coil must be greater than 1.0 ohm. You can also turn to a high efficiency spool also exceeding this value.

Original reference OEM:

123\PORSCHE-4-R-V