Electronic ignition

This ignition replaces most Lucas ignitions on British 4-cylinder engines equipped with an ignition distributor rotating in an anti-clockwisedirection.

16 pre-programmed advance curves can be easily selected using a small rotating button

This ignition replaces most Lucas ignitions on British 4-cylinder engines equipped with an ignition distributor rotating in an anti-clockwise direction.

16 pre-programmed advance curves can be easilyselected using a small rotating button

This ignition replaces most Lucas ignitions on British 4-cylinder engines equipped with an ignition distributor rotating in an anti-clockwise direction..

16 pre-programmed advance curves can be easily selected using a small rotating button

This ignition replaces most Lucas ignitions on British 6-cylinder engines equipped with an ignition distributor rotating in an anti-clockwise direction.

16 pre-programmed advance curves can be easily selected using a small rotating button.

Positive to earth

This electronic vacuum ignition for Renault 16 and Alpine 1600 (09/1968- 12/1979) is specific to vehicles equipped with Renault Cléon Alu type 807 and 843 engines.
This 123 igniter for R16 is a vacuum advance igniter. It is equipped with a distributor head with straight outlets. It has 16 different ignition curves, R234D59, R243D59, R243D60, R244D61, R245D60, R266D59, R273D60 and R267, which you can select using a thumbwheel according to your vehicle's engine type.
Compatible models :- Renault 16 TL R1152 09/1970 to 08/1974 Cléon-alu type 807 - 1565cm3 67hp (A2L)- Renault 16 TL R1152 09/1974 to 08/1975 Cléon-alu type 807 - 1565cm3 65hp (A2L)- Renault 16 TL R1157 09/1975 to 12/1978 Cléon-alu type 807 - 1565cm3 55hp (A2L)- Renault 16 TX R1156 09/1973 to 12/1979 Cléon-alu type 843 - 1647cm3 93hp (A2M)
- Alpine Berlinette A110 1600 - type 1600 VA 09/1968 to 09/1969 Cléon-alu type 807-24 - 1565cm3 92hp- Alpine Berlinette A110 1600 - type 1600 VB 09/1969 to 09/1970 Cléon-alu type 807-24 - 1565cm3 102hp- Alpine Berlinette A110 1600S - type 1600 VB 10/1969 to 04/1973 Cléon-alu type 807-25 - 1565cm3 138hp- Alpine Berlinette A110 1600SX - Type 1600 VH 10/1975 to 07/1977 Cléon-alu type 843-30 - 1647cm3 95hp
- Alpine A310 1600 VG 08/1975 à 07/1976 Cléon-alu type 843 - 1647cm3 95hp
We recommend using a coil with an impedance greater than 1 Ohm.

This electronic vacuum ignition for Renault 4 (10/1975- 12/1993) - Cléon fonte has been specially designed for Renault 4, which are equipped with the Cléon-Fonte engine.

This 123 ignition for R4 is equipped with a vacuum capsule and a distributor head with straight outlets. It features 16 different ignition curves, so you can choose your curve for your Renault using a thumbwheel.

This igniter is compatible with the following models:
- Renault 4 GTL and Clan - R1128
- Renault 4 Savane - R112C
- Renault 4 F4 and F6 R210B, R2370, 3C2370, R239B, R2430

We recommend using a coil with an impedance greater than 1 Ohm.

This 123 Ignition electronic igniter with vacuum for Alpine A110 (01/1963-12/1976) - Cléon is specially designed for Alpine A110 equipped with Cléon-Fonte engine.

Theelectronic igniter for Alpine A110 features a vacuum capsule and a distributor head with straight outlets. It features 16 different ignition curves, so you can choose your curve for your Renault using a thumbwheel. for engine types 688 and 810.

This igniter is compatible with the following models:
- Berlinette A110 1100 V70 - type 1100VA (01/1963-08/1969)
- Berlinette A110 1100 75 - type 1100VA (28/02/1968) - Chassis n°3950
- Berlinette A110 V85/1300 - type 1300 VC (10/1969-12/1976)

123 Ignition electronic igniter specially designed for Renault 4 and Renault 5 models fitted with the Cléon-Fonte engine.
The igniter is fitted with a vacuum capsule and a distributor head with straight outlets. It has 16 different ignition curves, so you can choose your curve for your Renault using a thumbwheel.
This igniter is compatible with the following models:
- Renault R4 C1C 956cm3 engine- Renault 4L engine 688-11 1108cm3- Renault 5 engine 689-10 956cm3- Renault 5 engine 688-13 1108cm3- Renault 5 engine 810 1289cm3

The 123 Ignition electronic igniter is specially designed for the Citroën 2CV, Dyane, Ami and Mehari.
This igniter allows you to optimize the performance and reliability of your Citroën!The igniter is designed to work with Citroën's original (black) ignition coil, and is compatible with both 6- and 12-volt vehicles.
This igniter allows you to select the right ignition curve for your Citroën from a choice of 16 different curves to suit your engine.
It is compatible with the following engine types and chassis by selecting the right curve:- 9 hp 375cc type A -> curve 1- A53 type AZ -> curve 2- M4 type AM -> curve 3- A79/0 type AYA -> curve 4- M28 type AM2 -> curve 5- A79/1 type AYA2-> curve 6- M28/1 -> curve 7(AK2), 8(A06/635), 9(A06/642), A(AM2A), B(A06/664) and F(bio-ethanol E85 conversion)

This ignition is designed for all standard 2CV engines.

The appropriate advance curve is selected using a rotating button.
There are 16configurations.

Thesystem can work with 6 V or 12 V.

The 123 Ignition electronic igniter is specially designed for the Citroën 2CV, Dyane, Ami and Mehari.

This igniter allows you to optimize the performance and reliability of your Citroën!
The igniter is designed to work with Citroën's original (black) ignition coil, and is compatible with both 6- and 12-volt vehicles.

This igniter allows you to select the right ignition curve for your Citroën from a choice of 16 different curves to suit your engine.

It is compatible with the following engine types and chassis by selecting the right curve:
- 9 hp 375cc type A -> curve 1
- A53 type AZ -> curve 2
- M4 type AM -> curve 3
- A79/0 type AYA -> curve 4
- M28 type AM2 -> curve 5
- A79/1 type AYA2-> curve 6
- M28/1 -> curve 7(AK2), 8(A06/635), 9(A06/642), A(AM2A), B(A06/664) and F(bio-ethanol E85 conversion)

This ignition is designed for all standard 2CV engines.

The appropriate advance curve is selected using a rotating button.
There are 16configurations.

Thesystem can work with 6 V or 12 V.

This ignition is designed for Citroên Méhari.

The appropriate advance curve is selected using a rotating button.
There are 16configurations.

Thesystem can work with 6 V or 12 V.

This ignition is designed for all standard 2CV engines.

The appropriate advance curve is selected using a rotating button.
There are 16configurations.

Thesystem can work with 6 V or 12 V.

123 Ignition electronic igniter specially designed for Citroën 2CV, Dyane, Ami and Mehari.

This igniter allows you to optimize the performance and reliability of your Citroën!
The igniter is designed to work with Citroën's original (black) ignition coil, and is compatible with both 6- and 12-volt vehicles.

This igniter allows you to select the right ignition curve for your Citroën from a choice of 16 different curves to suit your engine.

It is compatible with the following engine types and chassis by selecting the right curve:
- 9 hp 375cc type A -> curve 1
- A53 type AZ -> curve 2
- M4 type AM -> curve 3
- A79/0 type AYA -> curve 4
- M28 type AM2 -> curve 5
- A79/1 type AYA2-> curve 6
- M28/1 -> curve 7(AK2), 8(A06/635), 9(A06/642), A(AM2A), B(A06/664) and F(bio-ethanol E85 conversion)

Magnaspark II high-efficiency ignition package
Complete: Igniter, coil, wiring harness
Brand : CB PERFORMANCE USA
Voltage: 12 Volts
For Beetle, Combi with VW engines: Type 1

Top-quality manufacturing!
- Hand-assembled, polished CNC-machined aluminum
- Shaft mounted on sealed bearing and bronze ring
- Precise, high-quality contacts
- Easy to install and use.
- Easy-to-set feed rate adjustment
- Stable spark up to 10,000 rpm
- Coil resistance 1.1 / 13.5 Ohms
- 100% silicone 8.2 mm bundle
- Heat-resistant to 300°.

Flame-Thrower type 009 igniter with centrifugal advance curve and "IGNITOR 1" electronic module for 12-volt circuit.
Ideal for all VW engines, prepared or original, improves torque and power, modernizes ignition and makes it more reliable. No more capacitor failures and platinum-plated screws in the middle of a drive!

Offer: Reliability, easier starting, better idle, better spark, longer spark plug life, lower fuel consumption, less pollution, stable performance above 5,500 rpm, no need to adjust platinum screws, easy to install once and for all, excellent value for money.
This igniter is a PERTRONIX USA product.

Suitable for replacing BOSCH igniters (VW, Porsche)
- Type 1 engines: 1200 to 1600cc (except foot-molded)
- Type 3 engines: 1500, 1600cc
- Type 4 engines: 1700, 1800, 2000cc with carburetor

PERTRONIX FLAME-THROWER centrifugal distributor with IGNITOR 1 electronic module for Porsche 914-4 converted to carburettors :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1973
- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973
- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

He improves :
- torque and power
- the reliability of your ignition.
- the start
- slow motion
- the spark at the candle

The engine efficiency at high rev is better, the consumption is improved and the maintenance of your distributor is facilitated with the elimination of the condenser and the breakers.

Mecatechnic advises you to connect this igniter to a Pertronix 1 coil at 40,000 Volts

Optimize your Peugeot by opting for the benchmark in electronic ignition! This 123 Ignition is specially designed to replace Ducellier igniters on older Peugeots, giving you greater reliability and greater flexibility!

The igniter features a vacuum capsule and a knob with 16 preset ignition curves, allowing you to choose the right ignition curve for your Peugeot.

This igniter is compatible with the following models:
- Peugeot 203
- Peugeot 204
- Peugeot 304
- Peugeot 403
- Peugeot 404
- Peugeot 504
- Peugeot 505
- Peugeot J5
- Peugeot J7
- Peugeot J9

Compatible with SEV Marchal et Ducellier M3, M12, XC1, M127, M59, M43, M75, M48, M36, M42, M50, M53, M77, M78, M95, M71, M86 igniters.

123 Ignition electronic ignition for Fiat 500 and Fiat 126

For Fiat 500:
-Fiat 500 F (1965-1968)
-Fiat 500 L (1968-1972)
-Fiat 500 R (1972-1975)

For Fiat 126:
-Fiat 126 594cc (1973-1977)
-Fiat 126 652cc (1977-1987)

Optimize your Italian by opting for this 123 Ignition electronic ignition specially designed for the Fiat 500 and 126

The igniter has 16 different and pre-set ignition curves, allowing you to choose between a "factory" type ignition curve or to choose a more advanced ignition curve, for example to run on ethanol.

Thanks to an adjustment wheel, you can fine-tune the advance parameters according to your use.


It is advisable to have a coil with an impedance greater than 1 Ohm.