Insulator & sound-reducing

High-performance soundproofing, this professional pack includes 9 large sheets of Dynamat Xtreme black (81 x 46 cm), i.e. approx. 3.3m², for effective soundproofing of your vehicle.

Dynamat is a thin, flexible sheet, easy to cut and mold, which stops noise caused by resonance and vibration using viscoelasticity. Your vehicle's acoustics will be greatly improved, especially on older vehicles.

You can apply Dynamat in patches to prevent a specific panel from resonating, or you can apply it to an entire area (such as the floor, doors or trunk) to create an acoustic barrier and vibration damper.
Even a small amount of Dynamat can result in a significant reduction in noise. For example, applying Dynamat to your vehicle's doors can reduce road noise by 3 to 6 dB.
Full coverage of an average vehicle can reduce road noise by 9, 12, even 18 dB!

For complete insulation (hood, doors, trunk, roof, floor...) count on between two and three of these packs, depending on the vehicle: 1 pack = 3.2 m2.

Please note: the Dynamat Xtreme is now available in black. Some images show the former gray color.

This professional high performance soundproofing pack includes 9 large sheets of Dynamat Xtreme Mega Pack black (61 x 122 cm) or approximately 6.6m² for the effective soundproofing of your vehicle. Ideal for covering large areas.

Dynamat is a thin, flexible, easy-to-cut and easy-to-mould sheet that prevents noise caused by resonance and vibration by using viscoelasticity. The acoustics of your vehicle will be greatly improved, especially on older vehicles.

You can apply Dynamat in patches to prevent a specific panel from resonating, or you can apply it to an entire area (such as the floor, doors or boot) to create a sound barrier and vibration damper.
Even a small amount of Dynamat can result in significant noise reduction. For example, applying Dynamat to your vehicle doors can reduce road noise by 3 to 6 dB.
Full coverage of an average vehicle can reduce road noise by 9, 12, even up to 18 dB!

Note: the Dynamat Xtreme is now black. Some pictures show the old grey colour.

Thibaude natural felt sound insulator, for use under carpets and rugs.

Made from resin-bonded fibers, with one side coated for good heat and long-term resistance. Easy to cut and glue with neoprene glue.
Coated side
M3 flame retardant
gr /
Density: 1500 gr / m²
Width: 150cm
Thickness: 10mm

Sold by linear meter

Specifically designed for prestige and classic cars, Dynaliner is currently the most effective sound insulation on the market. It consists of a self-adhesive closed-cell foam, able to resist water and oil. In contrast to most carpet preparation products, Dynaliner does not retain water. So, there is no risk of additional rust inside your vehicle. Dynaliner effectively protects against noise pollution and prevents thermal bridges.
Dynaliner is even more effective when it is applied onto a layer of Dynamat Xtreme.

1 piece measuring 81 x 137 cm, 13 mm thick

Specifically designed for prestige and classic cars, Dynaliner is currently the most effective sound insulation on the market. It consists of a self-adhesive closed-cell foam, able to resist water and oil. In contrast to most carpet preparation products, Dynaliner does not retain water. So, there is no risk of additional rust inside your vehicle. Dynaliner effectively protects against noise pollution and prevents thermal bridges.
Dynaliner is even more effective when it is applied onto a layer of Dynamat Xtreme.

1 piece measuring 81 x 137 cm, 6.5 mm thick

Width 100 cm / Length 100 cm
Thickness:approx. 0.5 mm
Weight: approx. 450 gr/m2
Self-adhesive thermal barrier preventing heat radiation up to 1000°C.
Ideal for protecting your aprons and electronics housings from heat radiating from the engine.
Not tobe applied to an exhaust.

Application areas :
Vehicle chassis and interiors, household appliances, shipbuilding, machinery, walls, air ducts, soundproof doors, etc...

Application tips: Thoroughly clean the surface of all dust, grease, oil and water to ensure the most effective bonding possible. Be sure to press thoroughly over the entire surface. For cold bonding, the temperature should not be lower than 15°C. Self-adhesive is made from a high-quality acrylic system. Heat the sheet with a blowtorch for perfect application.

Sheet dimensions: 20 x 50 cm x 3 mm thick 
Grammage = 5 kg / m ( - 0.3) = density approx. 1.82 g/cm³!
Flash point > 230°C, heat set for 2 h at 120°C.
Flammability resistance to DIN 75200

Sold in sets of 5 sheets.

Composed of a thick layer of fiberglass, this panel provides thermal and acoustic insulation for vehicle interiors, engine compartments...
Relatively flexible and easy to cut, it adapts easily even in angled areas.
Its self-adhesive underside makes it easy to install without tools.

Dynamat bonnet kit, sold as "Hoodliner" on English-speaking markets.

Kit which soundproofs the vehicle bonnet. A large foam panel covers an aluminium layer which reduces the noise and the bonnet's increase in temperature. Water and oil-resistant. Dimensions: 81 x 137 x 2 cm.
Adhesive cover for an easy installation.

Dynamat Soundproofing Xtreme Superlite large pack, lightweight version.
With this soundproofing kit, your vehicle's acoustics will be greatly improved.
SPECIAL ULTRA THIN, ULTRA LIGHT

Pack containing 12 sheets of DYNAMAT Superlite, each measuring 45 x 80 cm. DYNAMAT Superlite sheets are lighter and thinner than DYNAMAT Xtreme, and are designed for installations where thickness and weight are critical (circuit preparation, racing, doors...). Total: 4.3 m2.

Specifically designed for prestige and classic cars, Dynaliner is currently the most effective sound insulation on the market. It consists of a self-adhesive closed-cell foam, able to resist water and oil. In contrast to most carpet preparation products, Dynaliner does not retain water. So, there is no risk of additional rust inside your vehicle. Dynaliner effectively protects against noise pollution and prevents thermal bridges.
Dynaliner is even more effective when it is applied onto a layer of Dynamat Xtreme.

1 piece measuring 81 x 137 cm, 3.2 mm thick

Soundproofing for campers and vans.
High-performance insulation specially designed for insulating floors, walls and ceilings of motorhomes and caravans.
Advantages:
- As a "closed" insulator, it offers an unequalled insulating capacity against moisture.
- It also insulates from the cold with a thermal conductivity of 0.0200.035. 
- Very easy to cut with a knife or cutter.
- Flexible, it adapts to the shape of your vehicle's body.
- Space-saving: it has a far superior insulating power to traditional insulation, which allows it to have a comparable insulating power whilst saving space and gaining volume.
- It does not creak.
- Fitted using a special adhesive (not provided). 
Tip: avoid air holes and condensation for better insulation.
Technical specifications:
- Thickness: 15 mm. 
- Expanded polyethylene foam. 
- Sheet colour: black.
Sold as a 1 x 2 m, i.e. 2 m², sheet.

Width: 1.50 metres
Thickness: 8 mm
Density: 900 gr/m²

This polyethylene foam insulation sheet with an adhesive face, can be used as thermal and sound insulation. It is ideal for insulating doors.

This insulation is made with closed cells, which means that the product does not absorb water.

Technical details:
- Thickness: 8 mm
- Weight: 200 g
- Sold by sheet: 100 x 50 cm

Smooth anthracite grey felt to trim boots, the rear parcel shelf and the walls of vans.

Felt made from polypropylene which is resistant to light and water. It is attached by bonding or by using clips.

Technical details:
- Colour: Anthracite grey
- Width: 2 metres
- Thickness: 2 to 3 mm
- Composition: 100% Polypropylene

Sold by the linear metre.

Essential for effective application
This little roller makes applying Dynamat Xtreme and Superlite so much easier. Dynamat perfectly contours thesurface to be treated and is essential for guaranteeing optimum thermal andsound insulation.

This cell foam soundproofing will insulate the passenger compartment by absorbing vibrations and noise. The soundproofing is quick and easy to install thanks to the adhesive face.

Technical details:
- Thickness: Between 2 and 2.5 cm
- Weight: 280 g
- Sold by sheet: 100 x 50 cm

Superior qualityTHERMO RACING heat shield made from aluminised fibreglass. This heat shield is resistant to folds and abrasions, it has a barrier to reflect heat radiation and resists radiation temperatures up to 1000°C.

Weight: 1060 g/m²
Thickness: 1.35 mm
Tear strength warp/weft: 3000 N/5 cm
Width: 1000 mm
Length: 1000 mm

COOL IT "thermo guard"thermal and acoustic insulation 60x120cms
This acoustic and thermal insulation protects against noise, heat and vibration.Easy to apply to all surfaces.
Dimensions : 60x120cmsThickness : 0.6mm

TEROSON BT SP 300 self-adhesive bituminous soundproofing sheet is a thermo-formablesoundproofing material designed to suppress vibrations and reduce structure-borne noise . It's ideal for interior floors and vehicle chassis . Each panel has a solvent-free adhesive backing based on special acrylic copolymers. Simply press to bond. Thanks to its excellent flexibility when heated, it can adapt to rounded shapes, ribs, corners and narrow undulations on the bodywork without any difficulty.
It is recommended to prepare the application surface in advance with TEROSON VR 10 (Order No. UO99110, to be ordered separately).

The box contains 4 sheets, each measuring 100x50cm, for a total of 2m². Thickness is 2.6mm.

Benefits :
- Sound-absorbing panels to suppress vibrations and reduce noise transmitted by metal structures.
- Ideal for interior floors, chassis, trunk floors, interior wheel arches, etc...
- Powerful self-adhesive (no glue required).
- Flexible once heated to adapt perfectly to all body shapes.

Technical specifications :
- Base: bitumen
- Color: black
- Density: 5.16kg/m².

Please observe safety precautions.