Brake calipers

The brake bleed screw cap is a small accessory found at the end of the bleed screw on brake systems. Its main purpose is to protect the bleed screw from dirt, moisture and oxidation. In addition to this protection, it helps maintain brake system pressure and prevent brake fluid leakage during servicing.This protective rubberplug is suitable for bleed screws on wheel cylinders, brake calipers and clutch actuators.

Diameter: M7 mm
Length: 35 mm

Thread length: 11 mm
Total length: 37 mm

Thread: M7 x 1.0
Length of the part in the caliper: 16.5 mm

With rubber cap

Thread: M6 x 1.0
Length of the part in the stirrup: 17 mm

Thread: M6 x 1.0
Length of the part in the caliper: 22 mm

Diameter : M6 mm
Length : 38 mm

For rear brake with drums

Material: zinc plating
Quantity: 60 pcs

Sizes:

- 1/4 UNF x 28 tpi
- 3/8 UNF x 24 tpi
- M6 x 1.0mm x 29mm
- M7 x 1.0mm
- M8 x 1.25mm
- M10 x 1.0mm

Kit of 2 front brake calipers Left Right, original type. Supplied with pads.

For VW
- Beetle, Karmann-Ghia, 08/1966->
from chassis N° 117 000 001->
- Type 3, 08/1965 ->03/1971
Chassis N° 316 000 001 ->311 2268 738.

Front right-hand brake calliper. Comes without pad or fixed calliper bracket, only floating part.

For VW Transporter T25/T3/Bus
Years : 05/1979 ->06/1986
Up to chassis no. N°->24-G-120 000.

Front left brake caliper for VW Combi Bay Window from 08/1972 to 07/1979 from chassis n°2132000001.This FORST caliper will ensure good braking of your vehicle if any repairs have been unsatisfactory or if the condition of your caliper requires a complete replacement.Supplied without brake pads.

Front right brake caliper for VW Combi Bay Window from 08/1972 to 07/1979 from chassis n°2132000001.This FORST caliper will ensure good braking of your vehicle if any repairs have been unsatisfactory or if the condition of your caliper requires a complete replacement.Supplied without brake pads.

Front left-hand brake calliper. Comes without pad or fixed calliper bracket, only floating part.

For VW Transporter T25/T3/Bus
Years : 05/1979 ->06/1986
Up to chassis no. N°->24-G-120 000.

Left front brake caliper for Volkswagen Golf 1, 2 and 3 with original VW II (VW 2) mounting only:

- Golf 1 from 1979
- Golf 2 1.6 / 1.8 carb / D, TD and GTI 8S / 16S until 07/1989
- Golf 3 1.4 / 1.8 / 1.9D until 07/1995

Color: gray

2 rubber bushes included.
Supplied without sliders (metal guide rings) and screws (Order No. GH28808 to be ordered separately).

This is the floating part of the stirrup only.
Depending on the version, the caliper may be positioned differently from your original position on the bracket. This does not interfere with proper operation (centering is achieved via screws and slides).

New caliper with no return of your old part (no exchange, no deposit).

Front left brake caliper for Volkswagen Polo:

- G40 1.3L 115hp from 1987 to 1994 (engine code PY)

The 2 rubber bushes are included.
Supplied without sliders (metal guide rings) and screws (part no. GH28808 to be ordered separately).

This is the floating part of the stirrup only.
Depending on the version, the caliper may be positioned differently from your original position on the bracket. This does not interfere with proper operation (centering is achieved via screws and slides).

New caliper with no return of your old part (no exchange, no deposit).

Left front brake caliper for Seat Ibiza 6K if fitted with 239x12mm or 239x 20mm discs.

The 2 ring rubbers are included.
Supplied without sliders (metal guide rings) and screws (order part no. GH28808 separately).

This is the floating part of the stirrup only.
Depending on the version, the caliper may be positioned differently from your original position on the bracket. This does not interfere with proper operation (centering is achieved via screws and slides).

New caliper with no return of your old part (no exchange, no deposit).

Left rear brake calliper for original assembly with brake code 2E2 (original assembly with 15" wheels) or 2E3 (original assembly with 16" wheels)

Offered in part exchange subject to a deposit.

For VOLKSWAGEN Transporter T4 from 1996
from chassis no. 70-V-120 001->

Delivered without pads or fixed calliper bracket, floating part only.

Front right brake caliper for Volkswagen Polo:

- G40 1.3L 115hp from 1987 to 1994 (engine code PY)

The 2 rubber bushes are included.
Supplied without sliders (metal guide rings) and screws (part no. GH28808 to be ordered separately).

This is the floating part of the stirrup only.
Depending on the version, the caliper may be positioned differently from your original position on the bracket. This does not interfere with proper operation (centering is achieved via screws and slides).

New caliper with no return of your old part (no exchange, no deposit).

Right-hand front brake caliper for Seat Ibiza 6K if fitted with 239x12mm or 239x 20mm discs.

The 2 ring rubbers are included.
Supplied without sliders (metal guide rings) and screws (order part no. GH28808 separately).

This is the floating part of the stirrup only.
Depending on the version, the caliper may be positioned differently from your original position on the bracket. This does not interfere with proper operation (centering is achieved via screws and slides).

New caliper with no return of your old part (no exchange, no deposit).

Front right brakecaliper for Volkswagen Golf 1, 2 and 3 in original VW II (VW 2) mounting with 239x12mm or 239x20mm discs only:
- Golf 1 Sedan from 1979 to 1983- Golf 1 Cabriolet from 1979 to 1993- Golf 2 1.6 / 1.8 carburetor / D, TD and GTI 8S / 16S until 07/1989- Golf 3 1.4 / 1.8 / 1.9D until 07/1995
Color: grayBleed screws and rubber bellows included.
Supplied without sliders (metal guide rings) and fixing screws (order part no. GH28806 separately).
This is only the floating part of the bracket. Depending on the version, the caliper may be positioned differently from your original position on the bracket. This in no way impedes proper operation (centering is achieved via the screws and guides).
New caliper with no return of your old part (no exchange, no deposit).