Brake calipers

Volkswagen rear calipers Self-locking flange screws to fasten on:
- Golf 2
- Golf 3
- Scirocco
- Corrado
- Passat 3 (35i)

This 54mm ATE front brake caliper piston for VAG is compatible with models equipped with ATE front brake calipers and ventilated discs from 20 to 25mm thick.
Compatible models:- AUDI A3 8L- AUDI A3 8P (Sportback 2.0L TDI and 1.6L)- VW CADDY III- VW BORA- VW GOLF IV ( TDI and VR5)- VW GOLF V, and GOLF PLUS- VW JETTA III- VW NEW BEETLE- VW PASSAT B4 (16V and VR6)- VW POLO 9N- VW VENTO

Rear caliper guide bushes for VW LT35 from 1996 to 2006 with BOSCH / ATE mounting only

This BENDIX front caliper piston for PSA and RENAULT vehicles with 48mm piston are compatible with many PSA and RENAULT vehicles from the 80s.
Compatible models:- RENAULT 5 and Super 5- RENAULT 9 and 11- RENAULT 21- RENAULT EXPRESS- PEUGEOT 205- PEUGEOT 305- PEUGEOT 309- CITROËN AX- CITROËN C15

Jp Group front right brake caliper for Bmw z4:
Bmw z4 E85 Roadster :
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)

Rear brake pad spring and pin kit for Porsche 924 S from 1986 to 1988 :
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
The kit contains everything you need for both rear wheels.

Left side: upper
Right side: lower

1-piston floating brake caliper , rear left , driver's side for Volkswagen Golf 3:

- All models from 11/1991 to 08/1997 with LUCAS TRW mounting(brake codes 1KD and 1KK from 1996).

As the spring system for the handbrake cable is external to the caliper, we recommend that you check your original assembly before ordering. It is designed for full-size rear brake discs 226X10mm.

ATTENTION: Not suitable for GIRLING mounting or for GTI and VR6 versions produced from 08/1991 to 06/1995!

Bleed screw included.
Supplied without guide pivot bracket and screws.

Technical specifications :
- Piston diameter: 38mm
- OEM part numbers: 1H0615423 1H0615423DX

Stirrup sold as new without return of your old part (no exchange or deposit).

FEBI 1-piston rear right floating brake caliper , passenger side, for Seat Ibiza 6L:

- All models from 2001 to 2009 with brake codes 1KD and 1KS

Suitable for rear brake discs, size 232X9mm, centre distance 5x100.

Bleed screw included.
Supplied without guide pivot bracket and screws.

Technical specifications:
- Piston diameter: 34mm
- OEM reference: 6Q0615424A

Stirrup sold as new without return of your old part (no exchange or deposit).

Front brake pad mounting kit for Porsche 914 from 1970 to 1976 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972 only up to chassis 472 29 19032
- 914-4 1.7 - 80 hp (022-EA) from 1972 only up to chassis 472 29 19032
- 914-4 1.7 - 72 hp (022-EB) from 1972 only up to chassis 472 29 19032

- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Kit contains components for both front wheels.

These GIRLING 54mm front brake caliper sliders for VAG are compatible with models equipped with Girling front brake calipers with 13 or 20mm thick discs.
Compatible models:- AUDI 80, 90 and COUPE QUATTRO from 08/1982 to 07/1992- VW CADDY II- VW CORRADO- VW GOLF II GTI 16Vfrom 11/1988 to 10/1991- VW GOLF III GT, CAB, VARIANT; TDI- SCIRROCO 16V from 10/1985 to 07/1992- VW VENTO- VW PASSAT

These TRW or GIRLING 38mm piston rear caliper sliders for VAG Group Vehicles are compatible with models fitted with Girling and TRW rear brake calipers with 9mm thick discs.
Compatible models:- AUDI TT 8N- AUDI A3 8L- VW GOLF IV- VW NEW BEETLE 1.6L

Girling front brake caliper bracket for Volkswagen Golf 2, Golf 3, Corrado, Passat
For models with Girling braking system and 280x22mm discsPlease check your caliper brand before ordering
For VW Golf 2 :- 1.8 G60 160hp (PG)- 1.8 Rallye G60 (1H)
For VW Corrado :- 1.8 G60 160hp (PG)- 2.9 VR6 190hp (ABV)
For VW Golf 3 :- 2.0 GTI 8S 115hp (2E, ADY)- 2.0 GTI 16S 150hp (ABF)- 2.8 VR6 174hp (AAA)- 2.9 VR6 190hp (ABV)
For Passat B4 and B5 : - All models with 280x22mm front discs
Original Volkswagen part

This right front brake caliper for Volkswagen Cox, Karmann

Jp Group left rear brake caliper for Bmw 3 Series:
- Compatible with all Bmw 3 Series E46 Sedan, Touring, Compact, Coupé and Cabriolet versions from 04/1997 to 08/2006 with 6-cylinder petrol and 4-cylinder diesel engines.
Type :
- 316i m43 n42 n46- 318i m43 n42 n46- 320i m52tu m54b22- 320ci m54b22- 323i m52tu- 325i m54b25- 325ci m54b25- 325ix m54b25- 328i m52tu- 320D m47 and m47tu
Please note:
- Not suitable for 6-cylinder petrol engines engine code m54b30.
- Not suitable for 6-cylinder diesel engines, engine codes m57 and m57n.

For VW Golf 6 :
With front axle reference code from service book :
- 1ZE, 1ZP, 1LJ, 1ZD, 1ZA

Caliper sold without exchange

Front brake pad spring and pin kit for Porsche 924 S from 1986 to 1988 :
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
The kit contains everything you need for both front wheels.

Left rear brake caliper for Volkswagen Golf 6 Sedan and Variant:

Sedan :
- All 2-wheel drive or 4Motion models from 10/2008 with brake code 1KS (BOSCH mounting on 272x10mm solid brake discs with 5x112 spacing) -> from chassis number WVWZZZ1KZ9-400001

Variant :
- All petrol and diesel models from 02/11/2009 with braking code 1KS and 1KT (BOSCH mounting on 272x10mm solid brake discs with 5x112 spacing)

INFORMATION: On Sedan models, brake code 1KT corresponds to this brake caliper, but it is originally red. Therefore, if you own a sedan with brake code 1KT, you'll need to order this caliper and repaint it in red.

Technical specifications :
- Piston diameter: 38mm
- Color: gray
- Bleed screw included

This caliper is sold new without exchange of your old part (no deposit).

Right rear brake caliper for Audi A3 8P Sedan, Cabriolet and Sportback phase 2 :

- All petrol and diesel models from 04/2008 to 05/2013 with brake code 1KS ( BOSCH mounting on 272x10mm solid brake discs with 5x112 spacing) -> up to chassis number WAUZZZ8PZD-250000

Technical specifications :
- Piston diameter: 38mm
- Color: gray
- Bleed screw included

This caliper is sold new without exchange of your old part (no deposit).