Bumper

M-type sports front bumper in high-quality ABS plastic for E81 3-door sedan, E82 Coupé, E87, E87LCI 5-door sedan and E88 Cabriolet from 02/2003 to 10/2013:

- All models, all years (except 1 M Coupé).

Supplied with 2 gloss black radiator grilles (beans), lower central grille, fog lamp grilles and towing hole cover.
Metal reinforcement not supplied (the kit simply mounts on your car's original front bracket, so you can keep it).

ATTENTION :
- Not suitable for original PACK M mounting (different fastenings).
- Not for SRA headlamp washers
- Not for PDC parking sensors

ABS"M-type"front bumper for BMW 3-series E46 Saloon and Touring phase 1 with standard front bumper or M cladding without PDC parking assist system:

- All petrol and diesel phase 1 models from 04/1997 to 08/2001 (including those fitted with original M Sport Pack or M Aerodynamic Kit)

ATTENTION: Not suitable for E46 Sedan and Touring phase 2 from 09/2001 (different bumper side supports)!

Supplied with central grille, moldings (protective strips and license plate holder), towing cover, fog lamp surrounds.
Metal reinforcement not supplied (the kit simply mounts on your car's original front bracket, so you can keep it).
Front fog lamps not supplied, to be ordered separately (part numbers BA17640 or BA17642).

This quality bumper is supplied primed. We recommend that you first carry out a blank assembly on your vehicle to check the fit before proceeding with the final painting.

With all the features of the original M bumper for your Phase 1 sedan or station wagon, it will bring a sleek, sporty design to your car!

M3 look front bumper for BMW series 3 E36 all models except M3 and M-TECHNIC version.

This shield comes with the central grid
Reinforcement not provided

WARNING :
- It is advisable to do a blank assembly before painting
- Mounts only on standard bumper reinforcement (not on M-TECHNIC reinforcement)

Front bumper complete with metal fittings and support!
(most reproductions on the market have a lower quality plastic support)

For :
- Golf 1 Berline 08/1978 ->12/1983
- Golf 1 Cabriolet 01/1979 ->12/1987
- Golf 1 Caddy 10/1982 ->07/1992

Front bumper

Rear bumper blade in original sheet metal without holes, excellent value for money.Not designed to accept a rubber molding as original.This bumper blade in black paint finish for VW Transporter T25 / T3 from 05/1979 to 07/1992 will give you complete satisfaction.Supplied bare, without fittings or end caps.

Original type rear bumper with accessories

For :
- Golf 1 Berline 08/1978 ->12/1983
- Golf 1 Cabriolet 01/1979 ->12/1987
- Golf 1 Caddy 10/1982 ->07/1992

M design front bumper for BMW series 3 E92 and E93 in high quality ABS plastic.

Compatible with all E92 (Coupé) and E93 (Convertible) models with headlamp washers but without holes for parking assist sensors.

Lower grilles integrated into the shield, requires ordering specific fog lamps sold separately: BA17641
Metal reinforcement and upper grilles not supplied (you can use your original versions)

Front bumper type R32 for Volkswagen Golf 4
For VW Golf 4 all models
ABS plastic as original, top quality!Supplied with chrome-plated grillesNot suitable for Golf 4 Cabriolet

"M type" front bumper with round fog light holes for BMW 5 series E39 Sedan and Touring:

- All phase 1 models from 02/1995 to 08/2000
- All phase 2 models from 09/2000 to 12/2003

Having all the characteristics of the original M bumper for your sedan or station wagon, it will bring the racy and sporty design to your car!

This front bumper is not intended for a parking assistance system (PDC)
Supplied with black central grille + moldings (protective strips) + towing cover
Metal reinforcement and license plate holder not supplied (the kit is easily mounted on the original front support of your car so you can keep it).

"M type" rear bumper for BMW 5 series E39 Sedan without reversing sensor (PDC) and with single outlet silencer.

The diffuser and the moldings are removable
Metal reinforcement not supplied

WARNING :
- It is advisable to do a blank assembly before painting
- Mounts only on standard bumper reinforcement (not on M-TECHNIC reinforcement)

It will bring a racy and sporty design to your car!

Superior quality part, called "adaptable" because it does not come from the manufacturer.

Golf 5 GTI front bumper
For Golf 5 all models except Golf 5 Plus
ABSfront bumper as original, smooth satin black, with red trim on grille. Top quality! Supplied with grilles, without lettering or fog lamps.

Pare-chocs avant "type M" en ABS pour BMW série 3 E46 Coupé et Cabriolet phase 1 avec pare-chocs avant standard ou habillage M et phase 2 avec pare-chocs avant habillage M uniquement :

- Tous modèles essence et diesel phase 1 du 03/1998 au 03/2003 avec pare-chocs avant standard, Pack Sport M ou Kit aérodynamique M

- Tous modèles essence et diesel phase 2 du 04/2003 au 08/2006 avec pare-chocs avant Pack Sport M ou Kit aérodynamique M uniquement

ATTENTION : Ce bouclier avant n'est pas prévu pour système d'aide au stationnement (option PDC) ni pour phase 2 avec pare-chocs avant standard (supports de pare-chocs différents) !

Grille centrale et supports d'antibrouillards inclus.
Renfort métal non fourni (le kit se monte très simplement sur le support avant d'origine de votre phase 1 ou de votre phase 2 vous pouvez donc le conserver).
Cache remorquage non fourni (vous pouvez réutiliser le cache de votre pare-chocs d'origine).
Feux anti-brouillards avant non fournis à commander séparément (références BA17640 ou BA17642)

Ce bouclier est livré en apprêt primaire. Nous vous recommandons d'effectuer dans un premier temps un montage à blanc sur votre véhicule afin de vérifier les ajustements avant de procéder à la mise en peinture définitive.

Haute qualité de fabrication en plastique ABS comme l'équipement d'origine. Il apportera le design racé et sportif à votre voiture !

Faithfulmetal reproduction of chrome-plated bumpers
Standard chrome not guaranteed
For Golf 1, 1974 ->07/1978 (adaptable 08/78 ->93).

Complete kit:
- 1 chrome-plated metal front bumper (ref. GA20205)
- 1 chrome-plated metal rear bumper (ref. GA20206)
- 4 ABS plastic bumper end pieces
- 4 bumper mounting brackets
- 8 chrome-plated screws to fasten the bumpers
(Supplied without indicator or central strip).

Rear bumper for VW Transporter T5 from 2003 to 05/2012 without holes for parking sensors.Supplied without bumper reinforcement.

Central rear bumper plate
in black ABS plastic, original type
supplied without side end pieces.

For Transporter T4phase 1 & 2 all models 09/90 ->12/95
except Pick-up version.

Front bumper "look E92 type M" in high quality ABS plastic for BMW series 3 E90 (Sedan) and E91 (Touring) :

- All models (without headlight washers or parking assist sensors)

Lower grilles integrated into the shield, requires ordering specific fog lamps sold separately : BA17641
Metal reinforcement and upper grilles not supplied (you can use your original versions)

ATTENTION : This front shield is not suitable for M3, LCi and original assembly in "PACK M" (different fixings) !

Having all the characteristics of the original M bumper for your sedan or station wagon, it will bring the racy and sporty design to your car!

Chrome rear bumper center blade for Bmw 3 series:
- Compatible with all Bmw 3 Series E30 Phase 1 Sedan and Coupé models from 01/1981 to 08/1987 all engines.
Good to know:
- Also suitable for Cabriolet models up to 09/1990.
- Despite the great care taken during manufacture, we cannot guarantee chrome-plating in "competition condition". The parts are delivered to you in perfect, undamaged condition. However, the blades may sometimes show very slight traces due to the manufacturing process (mostly in areas invisible after assembly).
Restore the shine to your bumpers and the impeccablefactory look !

Small rear bumper, black finish with red edging.

Comes complete with fittings and support for Volkswagen Golf 2 only.

Quality part, called "adaptable" because it does not come from the manufacturer.

This chromed front bumper for Volkswagen Beetle (08/1967-07/1974) offers good value for money for a faithful reproduction of the Beetle front bumper,
Without integrated indicators this square front bumper comes with the self-adhesive black strip and allows the installation of a rib.
Compatible models :- Volkswagen Beetle 1200 from 08/1973 to 07/1974 from chassis number N° 114 2000 001 to N° 114 2999 000- Volkswagen Beetle 1300 and 1500 from 08/1963 to 07/1974 from chassis number N° 118 000 001 to N° 114 2999 000- Volkswagen Beetle 1302 from 08/1970 to 07/1974 from chassis number N° 111 2000 001 to N° 114 2999 000- Volkswagen Beetle 1303 from 08/1970 to 07/1974 from chassis number N° 111 2000 001 to N° 114 2999 000
The quality of the chromes available on the market does not allow us to guarantee them over time. We advise you to paint the inside of your bumpers with a rust inhibitor and to maintain your chrome regularly.