Elements of hanging pots

This dust cover for 2cvs is faithful to the original.

These suspension cylinder end boots are made of rubber.
It is excellent quality and faithfully reproduces the original dust cover.

Thissuspension pot dust cover for 2CV AZ-AZAM (09/1962-02/1970)is faithful to the original.

These suspension pot end boot for 2CV is made of rubber.
It is of excellent quality and faithfully reproduces the original dust cover.

This suspension pot end dust cover for 2cv van (04/1963-03/1978) is faithful to the original.

These suspension pot end dust cover for 2CV is made of rubber.
It is of excellent quality and faithfully reproduces the original dust cover.

This suspension pot end dust cover for Dyane and Acadiane (08/1967-03/1987) is faithful to the original.

These suspension pot end dust cover for 2CV is made of rubber.
It is of excellent quality and faithfully reproduces the original dust cover.

This Suspension End Cap Dust Cover for Mehari (10/1968-03/0987)is faithful to the original.

These Suspension End Cap Dust Cover for Mehari is made of rubber.
It is of excellent quality and faithfully reproduces the original dust cover.

This suspension pot dust cover for AMI6 and AMI8 (04/1963-03/1979) is faithful to the original.

These suspension pot end boot for 2CV is made of rubber.
It is of excellent quality and faithfully reproduces the original dust cover.

This suspension knife edge pin for 2cvs is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension knife edge pin for 2cvs before 1970 is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension knife edge pin for 2cv vans is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension knife edge pin for DYANEs and Acadianes is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension knife edge pin for Meharis is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension knife edge pin for AMI6s and AMI8s is faithful to the original

This pin is specific to the small and large knife edges used to lock the tie rod ends of suspension cylinders.

You need 2 per knife edge, or 4 per suspension cylinder.

This suspension clevis knife edge for AMI 6 and AMI 8 cars - Big is a quality reproduction.

This large knife edge locks the rear tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for Meharis - Small is a quality reproduction.

This small knife edge locks the front tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for Meharis - Big is a quality reproduction.

This large knife edge locks the rear tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for DYANEs - Small is a quality reproduction.

This small knife edge locks the front tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for DYANEs and Acadianes - Big is a quality reproduction.

This large knife edge locks the rear tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side for DYANEs and two for Acadianes with their new pins.

This suspension clevis knife edge for 2cv vans - Small is a quality reproduction.

This small knife edge locks the front tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for 2cv vans - Big is a quality reproduction.

This large knife edge locks the rear tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.

This suspension clevis knife edge for 2cvs before 1970 - Small is a quality reproduction.

This small knife edge locks the front tie rod ends on the suspension cylinders to the suspension arms.

You will need one per side with its own 2 new pins.