Manual gearbox

Sealing kit for trumpet gearboxesMade from German quality components, this gasket kit will help youseal your trumpet gearbox.CSP quality.Kit includes :- 2 side cover gaskets- 2 side cover O-rings- 1 end plate gasket- 1 gearbox nose seal- 1 main shaft seal- 6 side seals 0.2 mm- 2 side seals 0.1 mm- 1 gearbox nose seal- 1 reverse switch gasket- 2 O-rings
- For VW Beetle, Karmann Ghia, 181 & type 3 since 1961.- For VW Bus Combi Split up to 1967.

Flexible de pression sur récepteur d'embrayage pour VOLKSWAGEN Transporter T4 de 1996 à 2003 :
- 2.5 TDi 102cv (ACV, AUF, AYC)
- 2.5 TDi 151cv (AXG, AHY)
- 2.8 essence 140cv (AES)

Filler cap for gearbox or
transmission housing on Quattro (4 x 4) models.
Dimensions: M24 x 1.5
for Audi 74 ->03:
- Audi 50
- Audi 80 / 90
- Audi Coupé / Quattro Sport
- Audi 100 & 200
- Audi V8
- Audi A3 / S3
- Audi TT

TOPRAN gearbox drain plug for Porsche :
- 356- 911 from 1965 to 1986- 914-4 & 914-6- 928 S from 1980 to 1986
Dimensions: M24 x 1.5

Gearbox drain cap manual synchronised or automatic versions.
Dimensions: M24 x 1.5

For Beetle, Karmann-Ghia, 181, Type 3& Combi

Drain plug for gearbox or transmission housing on Syncro models & 4-Motion (4 x 4)
Dimensions: M24 x 1.5
For VW all models 74 ->03:
- Golf, Jetta, Caddy
- Scirocco & Corrado
- Passat
- Polo
- NewBeetle
- Sharan
- Transporter

Gearbox drain cap manual synchronised or automatic versions.
Dimensions: M24 x 1.5

For VOLKSWAGEN Combi Split Brazil (1957-1975)

A worn pressure rod can interfere with changing gears smoothly and should be replaced at the same time as the clutch release bearing.
Length: 342 mm
For 5-speed manual gearbox only

Compatible with Skoda Octavia type 1U:
- 1.4 75hp (AXP, BCA)
- 1.6 75hp (AEE)
- 1.6 100hp (AEH, AKL)
- 1.6 102hp (AVU, BFQ)
- 1.9 SDi 68hp (AGP, AQM)

A worn rod can impair smooth gear changes, it is advisable to change it at the same time as the clutch push rod.
Length: 342 mm
For manual gearbox only.

For Golf 4 Saloon & Bora
with the following engines:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.6 100hp (AEH, AKL, APF), 102hp (AVU, BFQ)
- 1.6 105hp (ATN, AUS, AZD, BCB)
- 1.9 SDI 68hp (AGP, AQM)

A worn pressure rod can interfere with changing gears smoothly and should be replaced at the same time as the clutch release bearing.
Length: 342 mm
For 5-speed manual gearbox only

Compatible with Seat Ibiza type 6K until ->06/1999:
- 1.6 75hp (1F)
- 1.6 100hp (AFT)
- 1.8 90hp (ABS, ACC, ADZ)
- 1.8 16s 129hp (ADL)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 Turbo Diesel 75hp (AAZ)
- 2.0 115hp (2E, AGG)

For Seat Ibiza type 6K from 03/1999->:
- 1.6 100hp (AKL, APF, AUR)
- 1.9 SDi 68hp (AGP, AQM)

A worn rod can impair smooth gear changes, it is advisable to change it at the same time as the clutch push rod.
Length: 342 mm
For 5-speed manual gearbox only.

Suitable for Petrol and Diesel engines 1.5 ->1.8:
- Golf 1 Saloon, Cabriolet, Caddy andJetta 1 from 1979->
- Scirocco
- Golf 2 and Jetta 2 (except G60)

For A3 (8L) from 96 ->2003:
- 1.6 101hp (AEH, AKL, APF)
- 1.6 102hp (AVU, BFQ)

A worn rod can impair smooth gear changes, it is advisable to change it at the same time as the clutch push rod.
Length: 342 mm
For manual gearbox only.

For Golf 4 Cabriolet 99 ->03
with Petrol engines:
- 1.6 100hp (AFT, AKS)
- 1.8 75hp (AAM, ANN), 90hp (ADZ, ANP)
- 2.0 115hp (AGG, AKR, ATU, AWG, AWF)

A worn rod can impair smooth gear changes, it is advisable to change it at the same time as the clutch push rod.
Length: 342 mm
For 5-speed manual gearbox only.

For Golf 3 and Vento:
- 1.4 60hp (AEX)
- 1.6 75hp (AEA, AEE)
- 1.6 100hp (AEK, AFT, AKS)
- 1.8 75hp and 90hp (AAM, ABS, ADZ)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 turbo Diesel 75hp (AAZ)
- 2.0 115hp (2E, ADY, AGG, AKR)

A worn rod can impair smooth gear changes, it is advisable to change it at the same time as the clutch push rod.
Length: 342 mm
For 5-speed manual gearbox only.

For Polo Classic (6V2) 96 ->02:
- 1.6 75hp (1F)
- 1.6 100hp (AFT, AKL, APF, AUR)
- 1.7 SDi 60hp (AKW)
- 1.8 90hp (ADD)
- 1.9 Diesel 64hp (1Y, AEY)
- 2.0 115hp (ADC)

A worn pressure rod can interfere with changing gears smoothly and should be replaced at the same time as the clutch release bearing.
Length: 342 mm
For 5-speed manual gearbox only

Compatible with Seat Leon type 1M:
- 1.4 75hp (AHW, APE, AXP, BCA)
- 1.6 100hp (AEH, AKL)
- 1.6 102hp (BFQ)
- 1.6 105hp (AUS, AZD, BCB)
- 1.9 SDi 68hp (AQM)

Actuating lever fixed to the selector fork
For manual gearbox only.

Suitable for Golf 4 Cabriolet 99 ->03
with Petrol engines:
- 1.6 100hp (AFT, AKS)
- 1.8 75hp (AAM, ANN), 90hp (ADZ, ANP)
- 2.0 115hp (AGG, AKR, ATU, AWG, AWF)

Actuating lever fixed to the selector fork
For manual gearbox only.

Suitable for Golf 4 Saloon 99 ->03
with Petrol engines:
- 1.4 75hp (AHW, AKQ, APE, AXP, BCA)
- 1.6 100hp (AEH, AKL, APF), 102hp (AVU, BFQ)
- 1.6 105hp (ATN, AUS, AZD, BCB)
- 1.9 SDI 68hp (AGP, AQM)

Actuating lever fixed to the selector fork
For 5-speed manual gearbox only.

Suitable for Petrol and Diesel engines 1.5 -> 1.8:
- Golf 1 Saloon, Cabriolet, Caddy & Jetta 1 since 08/78->
- Scirocco
- Golf 2 & Jetta 2

Actuating lever fixed to the selector fork
For manual gearbox only.

Suitable for Golf 3 Saloon & Cabriolet 92 ->98
with Petrol and Diesel engines:
- 1.4 54hp (AEX), 60hp (APQ)
- 1.6 75hp (AEA, AEE), 100hp (AEK, AFT, AKS)
- 1.8 75hp (AAM, ANN), 90hp (ABS, ADZ, ACC, ANP)
- 1.9 Diesel 64hp (1Y, AEY), Turbo-Diesel 75hp (AAZ)
- 2.0 GTi 8S 115hp (2E, AGG, ADY, AKR, AEP)