Hardware

Set of gaskets for trumpet gearbox
Composed of elements in German quality, this sealing kit will allow you to seal your trumpet gearbox.
CSP quality.
This kit includes:
-2 seals of side covers
- 2 O-rings of side covers
- 1 end plate gasket
- 1 box nose seal
- 1 main shaft seal
- 6 side seals 0.2 mm
- 2 side seals 0.1 mm
- 1 box nose seal
- 1 reverse switch seal
-2o-rings

- For VW Beetle, Karmann Ghia, 181 & type 3,
Years: 1961->
- For VW Bus Combi Split,
Years: -> 1967

Flexible de pression sur récepteur d'embrayage pour VOLKSWAGEN Transporter T4 de 1996 à 2003 :
- 2.5 TDi 102cv (ACV, AUF, AYC)
- 2.5 TDi 151cv (AXG, AHY)
- 2.8 essence 140cv (AES)

Sealnear the cardan
For Kombi Bay Window 08/1975 -> 04/1979

MX5 NB NBFL Oil drain screw gasket (18x24x1.5 mm)

- Inside diameter 18mm
- Outside diameter 24mm
- Thickness 1,5mm

Fits all models NB NBFL : gearbox and rear axle.

MX5 NC NCFL Oil drain screw gasket (18x24x1.5 mm)

- Inside diameter 18mm
- Outside diameter 24mm
- Thickness 1,5mm

Fits all models NB NBFL : gearbox and rear axle.

Transmission primary shaft
Length: 287mm
for 4- or 5-speed
gearbox
Original Volkswagen Classic Parts

For VW:
- Combi Bay Window, T2
08/1970 ->07/1979
- Transporter T25 / T3, Bus
05/1979 ->07/1992
all models, including
Syncro version (4 x 4)

Gearbox cradle rear screw thrust ring for MX5 NA NBNBFL

- Genuine Mazda® Part

Synchroniser ring, sold individually
on 4-speed gear box 1st gear
Original Volkswagen Classic Parts.

For VW LT, 1976 ->1996

Synchroniser ring, sold individually
- on 4 connector box 2nd gear
- on 5 connectior box 2nd and 3rd gear
Original Volkswagen Classic Parts.

For VW LT, 1976 ->1996

Synchronized 1st gear ring for US original VW Combi Bay Window from 1975 to 1979 with a type 4 engine and with a US market specific 091 gearbox code if you have an imported model.

Synchronized 2, 3 and 4th gear ring for US original VW Combi Bay Window from 1975 to 1979 with a type 4 engine and with a US market specific 091 or 094 gearbox code if you have an imported model.

Magnetic drain plug screw on front or rear differential, sold individually. OriginalVolkswagen Classic Parts.

For VW LT 4x4, 12/1982 ->12/1995
Chassis: no. D-007 274 ->T-010 000.

Cap for the differential bevel gear or at the end of the driveshaft for models with automatic gearboxes

Bearing stopper segment on the primary shaft of the gearbox. Sold individually. Original Volkswagen Classic Parts.

For VW:
- Beetle, from 01/1972->
from chassis No. 112 2430 354->
- Karmann-Ghia, from 01/1972->
from chassis No. 142 2430 354->
- Kübel 181, from 01/1972->
from chassis No. 182 2482 842->
- Type 3, from 01/1972->
from chassisNo. 312 2078 249->
-Kombi T2 Bay, from 08/1971->
from chassisNo. 212 2000 001 ->
- Transporter T3, 05/1979 ->07/1992

Reverse switch on gearbox nose.

For VW Beetle, Karmann-Ghia, Type 3, 181, Combi
Years: since 08/1961->
Chassis : (Cox) since 3 192 507->

Slide on differential part ref. OE 113 517 191 A = 8.05 mm
4 required per gearbox, sold by the part.

For Beetle, Karmann-Ghia, Type 3, Kübel 181

Pinion and ring gear for 9x31 gearboxes
Splinedbevel gear without key

Volkswagen originally had 3 different final gears for its Type 1 transmissions.
The shortest was 8x35, for a final ratio of 4.375
The intermediate was 8x33, for a final ratio of 4.125
The longest available was 8x31 for a final ratio of 3.875
Now the 9x31 ring and pinion gives you a final ratio of 3.444.
Perfect for letting a high-performance engine gain speed on the Motorway, or for cruising at low revs with a properly built, large-displacement engine.

Suitable for VW Combi Split up to 1967

Double taper bearing for manual gearbox, for secondary shaft, 4-bolt model

For VW Cox, Combi Split, Karmann-Ghia, type 3, Kübel 181

2nd row roller with conical bearings
for manual gear box.

For VW:
- Beetle, from 01/1972->
from chassis no. 112 2430 354->
- Kübel 181, from 01/1972->
from chassis no. 182 2482 842->
- Bay Window Camper, 08/1971->
from chassis no. 212 2000 001 ->
- Transporter T25 / T3, 05/79 ->07/92
including Syncro (4 x 4)

4th gear bearing bush for VW Combi Split with splitcase gearbox from 03/1953 to 06/1959.