Steering box

New steering box
For vehicles with left-hand steering only

For VW Beetle 1302

New steering box, standard quality Brazil
For VW :- Beetle 1200, 1300, 1500, 08/1961->from chassis N° 3 933 185->(Front mounting ->04/1961 possible with 24 mm arm part no. VJ51415).- Karmann-Ghia all models 08/1961->from chassis N° 3 939 185->- Type 3 all models 04/1961-> - 181 from 1969 to 1979Arm diameter: 24 mm

New steering mechanism housing for VW Combi Bay Window from 08/1972 to 07/1979 from chassis no. 2132000001.
A loose steering gear won't give you a safe ride.
Changing it will give you much greater precision when moving around, as well as greater comfort when driving.

Diameter of steering unit output shaft on steering arm: 24 mm

Please note that the steering box on Bay Window models 08/1967 and 07/1972 with a 20 mm output shaft on the steering arm is no longer available. This housing is sometimes fitted for 1973.
Check before you buy!

Please note that the steering box can be delivered without the arm fixing nut, so for the chassis interval from n°2132000001 to n°2132195235, you won't be able to reuse your original nut.
As an alternative, MECATECHNIC recommends ordering part no. VH27400 or VH27390.

Rubber steering flex disc superior quality
Coupling between the box and the steering column.
Essential safety part that must be in good condition!

For Combi Bay Window, 08/1967 ->07/1979

Urethane steering plate (harder)
Connection between the case and the steering column.

For:
- Old Beetle 1200, 1300, 1500
- Karmann-Ghia all models
- Type 3 all models
- Kübel 181

Earthing braid on steering flex disc
essential to connect the steering column and unit.
Length: 130 mm, Mounting: eye - eye diameter: 8 mm
For:
- Beetle, from 08/1964-> No. 145 000 001->
- Karmann-Ghia, from 08/1964-> No. 145 000 001->
- Type 3, from 08/1970-> No. 311 2000 001->
- 181, from 08/1970-> No. 181 2000 001->
Can be fitted to all versions to improve the circuit earth.

Paper gasket for steering gear cover


- For VW Beetle (except 1302/1303) & Karmann-Ghia
Years: 08/1961 ->
- For VW 181 Trekker,
Years: 08/1969 ->12/1979
For VW Type 3 Fastback, Notchback, Variant
Years: 04/1961 ->07/1973

Pitman arm repair kit for Mercedes

For Mercedes S-Class W126 all models

This kit is for repairing the steering lever joint that connects the central bar to the axial steering link on the passenger side (also called the Pitman arm)
This axle can wear and become loose, making your steering lose precision and become prone to slamming

Contains everything you need to reconstruct the axle, the screws and washers
German Quality

Lock washers with tabs that fold down onto the clamp bolts of the steering box. 2 parts required for one vehicle, sold as a pair.

For VW Beetle, Karmann-Ghia, 181, Type 3
All models, all years.

Sealing ring for on the pitman arm-side steering screw axle. Original quality.
Dimensions: 28 x 40 x 7 mm.

For Beetle 1302 & 1303, 08/1970 ->07/1974
- 1302 Chassis no. 111 2000 001 ->112 3200 000.
- 1303 Chassis no. 133 2000 001 ->134 2999 999.
Models with steering box.

Steering "Pitman" arm.
This intermediate lever is fitted between the gearbox and the steering bars.

- For VW Combi Bay Window,
Years: 08/1967 ->07/1979
Chassis: 218 000 001 ->219 2153 964

Pitman arm repair kit for Mercedes

For Mercedes W109 Heckflosse :
- 300 SEL (109.016) from 02/1968 to 01/1970
- 300 SEL 3.5 (109.056) from 01/1969 to 09/1972
- 300 SEL 6.3 (109.018) from 12/1967 to 09/1972

This kit is for repairing the steering lever joint that connects the central bar to the axial steering link on the passenger side (also called the Pitman arm)
This axle can wear and become loose, making your steering lose precision and become prone to slamming

Contains everything you need to reconstruct the axle, the screws and washers
German Quality

Standard quality rubber steering plate
Union between unit and steering column.

For:
- Beetle 1200, 1300, 1500
- Karmann-Ghia all versions
- Type 3, all versions
- Kübel 181

Pitman arm repair kit for Mercedes

For Mercedes W115 all models (1967-1976)

This kit is for repairing the steering lever joint that connects the central bar to the axial steering link on the passenger side (also called the Pitman arm)
This axle can wear and become loose, making your steering lose precision and become prone to slamming

Contains everything you need to reconstruct the axle, the screws and washers
German Quality

This steering box sealing plug for Volkswagen Beetle and derivatives is made of plastic.
Sold individually, you'll need two per steering box.
Compatible models:- VW Beetle sedans and convertibles from 1961 to 1979- VW Karmann Ghia coupés and cabriolets from 1961 to 1974- VW Type 3 from 1961 to 1973- VW 181 all models

Steering Pitman arm
Fitted between theunit and steering bars
for large cone steering ball joints: 13.5 mm
Recess diameter of the arm on the unit: 24 mm
Version with or without stop (not essential).

For:
- Beetle 1200, 1300, 1500
from 08/1961->
(from chassis no. 3 933 185->)
- Karmann-Ghia all versions 08/1961->
(from chassis no. 3 939 185->)
- Kübel 181, 08/1969 ->12/1979

Adjustable steering knuckle for Brazilian VW Combi Split from 1957 to 1975.This adjustable steering head kit is very popular in Brazil, for example, and allows you to adjust the steering play to its minimum!

Spi seal on the top of the steering gearbox and for the steering lever.
Dimensions: 25 x 36 x 7 mm

- For VOLKSWAGEN Combi Split Brazil (1957-1975)

Adjustable steering knuckle for VW Combi Split up to 07/1967.This adjustable steering head kit is very popular in Brazil, for example, and allows you to adjust the steering play to its minimum!

Complete repair kit for the steering pivot
Very often the cause of play in the steering.

For Combi Split, 03/1955 ->07/1967
since chassis no. 20 - 117 902->