Carburetor flange

For Audi 100 1.8 DS / NP

For Audi 80:
- 1.6 75hp (DT)
- 1.8 90hp (DS)

The carburettor base plate links the intake pipe with the carburettor. This part ensures the seal and avoids unwanted air intake for smooth engine operation.

This rubber carburettor base plate is compatible with VW Scirocco:
- 1.6 70hp type EWA
- 1.6 72hp type RE
- 1.6 75hp type EW
- 1.8 90hp type EX

The carburetor spacer for VW Golf 1 Cabriolet is the link between the intake pipe and the carburetor. It's a key element in ensuring air-tightness and preventing air intakes.

It also dampens engine vibrations to prevent the fuel in the carburetor from "bubbling".

You'll need to change your carburetor baseplate when you notice these symptoms on your Volkswagen Golf 1 Cabriolet:
- Unstable idle
- Holes on acceleration
- Engine stalling when downshifting
- RPMs stuck in the rev range
- Carburetor moves abnormally from left to right

The rubber carburetor base is compatible with :
- 1.6 75hp type EW
- 1.8 90hp EX type

For Golf 2 :
- 1.6 75cv (EZ)
- 1.8 90cv & 108cv (GU, RF, RH, ABN)

For Polo 2 & 3 from 82 to ->94:
- 1.3 HK, HW, MH, NU, 2G

For Golf 1 cabriolet:
- 1.3 54hp (HK)

For Golf 2:
- 1.3 54hp and 55hp (2G, MH, HK)

For Audi 100 1.8 4B / PH

For Audi 80:
- 1.6 71hp (ABM)
- 1.8 90hp (JN, NE, PM)
- 2.0 90hp (ABT)

For Golf 2 1.8 90cv (RP single point injection)

For Golf 3 :
- 1.8 75cv (AAM)
- 1.8 90cv (ABS, ACC, ADZ, ANN, ANP)

For Passat (31/3A)
- 1.6 75cv (1F)
- 1.8 75cv (AAM)
- 1.8 90cv (RP, ABS, ADZ)

Throttle plate, intermediate flange between throttle body and intake manifold.

Compatible with Seat Ibiza type 6K:
- 1.6 75 hp (1F)
- 1.8 90 hp (ABS, ACC, ADZ)

For Golf 3:
- 1.4 60hp (AEX, APQ)
- 1.6 75hp (AEE)

External diameter: 57mm
Internaldiameter: 52mm
Height: 5.35mm

For Polo 6N1:
- 1.0 50hp (AER, ALL)
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
- 1.6 75hp (AEE, AHS)

For Polo 6N2:
- 1.0 50hp (ALD, AUC)
- 1.4 60hp (AKK, AUD)
- 1.4 54hp (AKP)

External diameter: 57 mm
Internal diameter: 52 mm
Height: 5.35 mm

This spacer enables a Solex 31 Pict carburettor to be mounted on a 34 mm intake pipe.
Gaskets and screws supplied.

Depending on your VW 's carburetion set-up (year / carburettor / original or reproduction pipe / dynamo / alternator), the carburettor can sometimes touch the dynamo or alternator, as the distance between them varies.
This specially designed spacer raises the carburettor by 9 mm and keeps it away from the dynamo or alternator, which solves the problem in most cases.
Supplied without gasket.

Depending on your VW's carburetion set-up (year / carburettor / original or reproduction pipe / dynamo / alternator), the carburettor can sometimes touch the dynamo or alternator, as the distance between them varies.
This specially designed spacer raises the carburettor by 26 mm and keeps it away from the dynamo or alternator, which solves the problem in most cases.
Supplied with 2 seals

For Polo 2 & 3 from 75 ->90:
- 0.9 40hp (HA)
- 1.1 50hp (HB)
- 1.3 60hp (HH)