Transmission coupling

MEYLE HD range 110mm reinforced transmission selector, located in front of the driveshaft, for BMW 02 E10 series:

- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)

ATTENTION: We advise you to check your flector before ordering, as another assembly with 76mm center distance exists!

Screws and bolts are not supplied.

Dimensions :
Mounting centers: 78mm (6 holes)
Outside diameter: 110mm
Inside diameter: 40mm
Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

This part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD range 110mm reinforced transmission selector, located between gearbox output and driveshaft , for BMW 1 Series E81 3-door Saloon, E87, E87LCi 5-door Saloon, E82 Coupé and E88 Cabriolet with manual gearbox only:

E81 3-door sedan :
- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)
- 116i 122hp from 03/2007 to 11/2011 (engine code N43B16)
- 116i 2.0L 122hp from 11/2008 to 11/2011 (engine code N43B20)
- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)
- 118i 2.0L 143hp from 02/2006 to 12/2011 (engine code N43B20)
- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)
- 120i 170hp from 09/2006 to 12/2011 (engine code N43B20)

E87 5-door sedan :
- 116i 115hp from 03/2003 to 02/2007 (engine code N45B16)
- 118i 2.0L 129hp from 07/2004 to 02/2007 (engine code N46B20)
- 120i 150hp from 03/2003 to 02/2007 (engine code N46B20)

E87LCI 5-door sedan :
- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)
- 116i 122hp from 03/2007 to 06/2011 (engine code N43B16)
- 116i 2.0L 122hp from 10/2008 to 06/2011 (engine code N43B20)
- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)
- 118i 2.0L 143hp from 02/2006 to 06/2011 (engine code N43B20)
- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)
- 120i 170hp from 02/2006 to 06/2011 (engine code N43B20)

E82 Coupé :
- 120i 150hp from 06/2009 to 10/2013 (engine code N46B20)
- 120i 170hp from 06/2009 to 09/2013 (engine code N43B20)

E88 Cabriolet :
- 118i 2.0L 129hp from 03/2008 to 09/2013 (engine code N46B20)
- 118i 2.0L 143hp from 09/2007 to 10/2013 (engine code N43B20)
- 120i 150hp from 11/2006 to 10/2013 (engine code N46B20)
- 120i 170hp from 11/2006 to 10/2013 (engine code N43B20)

ATTENTION: Not suitable for models with automatic gearbox!

Screws and bolts not supplied.

Dimensions :
Mounting centres: 78mm (6 holes)
Outside diameter: 110mm
Inside diameter: 40mm
Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

This part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD range 110mm reinforced transmission selector for BMW 3 series E21:

- 315 1.6L 75hp from 11/1980 to 12/1983 (engine code M10B16) --> manual gearbox
- 316 1.8L 90hp from 10/1980 to 09/1983 (engine code M10B18) --> manual and automatic gearboxes
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18) --> automatic gearbox
- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i) --> manual and automatic gearboxes
- 320 4cyl 109hp from 02/1975 to 10/1982 (engine code M10B20) --> automatic gearbox
- 320-6 6cyl 122hp from 09/1980 to 12/1982 (engine code M20B20) --> manual gearbox
- 320-6 6cyl 122hp from 08/1977 to 12/1982 (engine code M20B20) --> automatic gearbox
- 323i 6cyl 143hp from 09/1980 to 10/1982 (engine code M20B23) --> manual gearbox
- 323i 6cyl 143hp from 07/1977 to 10/1982 (engine code M20B23) --> automatic gearbox

ATTENTION: On 318 and 320 4 cyl M10 with automatic gearbox, a 2nd mounting is possible with 8 holes, external diameter 105mm!

Fasteners not supplied.

Dimensions :
Mounting centres: 78mm (6 holes)
Outside diameter: 110mm
Inside diameter: 40mm
Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD range 110mm reinforced transmission selector for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet with manual and automatic gearboxes:

4-door sedan :
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)
- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 02/1986 (engine code M20B27) --> manual gearbox only
- 325e 6cyl 2.7L 122hp phase 1 from 12/1986 to 08/1987 (engine code M20B27) --> automatic gearbox only
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25) --> manual gearbox only
- 325i 6cyl 170hp phase 1 from 12/1986 to 08/1987 (engine code M20B25) --> automatic gearbox only
- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25) --> automatic gearbox only
- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 12/1990 (engine code M20B25)
- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)
- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)
- 324td 6cyl 115cv phase 2 from 02/1987 to 12/1990 (engine code M21D24) --> automatic gearbox only

2-door coupé :
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)
- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)
- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)
- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)
- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
- 318is 136hp phase 2 from 02/1989 to 05/1991 (engine code M42B18) --> manual gearboxes only
- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 02/1986 (engine code M20B27) --> manual gearbox only
- 325e 6cyl 2.7L 122hp phase 1 from 12/1986 to 09/1987 (engine code M20B27) --> automatic gearbox only
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25) --> manual gearbox only
- 325i 6cyl 170hp phase 1 from 12/1986 to 08/1987 (engine code M20B25) --> automatic gearbox only
- 325i 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25) --> automatic gearbox only
- 325ix 6cyl 170hp phase 1 from 02/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25)

Touring :
- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)
- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)
- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)
- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)
- 325ix cat. 6cyl 170hp from 01/1988 to 12/1992 (engine code M20B25)
- 324td 6cyl 115hp from 01/1988 to 05/1993 (engine code M21D24) --> automatic gearbox only

Cabriolet :
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)
- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)
- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)
- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25) --> manual gearbox only
- 325i 6cyl 170hp from 12/1986 to 09/1990 (engine code M20B25) --> automatic gearbox only
- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)

Screws and bolts not included.

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

This part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD range 110mm reinforced transmission selector for BMW 3 series E36 Sedan, Touring, Compact, Coupé and Cabriolet :

Sedan :
- 316i 4cyl 100hp from 12/1990 to 08/1992 (engine code M40B16) --> manual gearbox
- 316i 4cyl 100hp from 12/1991 to 02/1994 (engine code M40B16) --> automatic gearbox
- 316i 4cyl 102hp from 02/1993 to 09/1998 (engine code M43B16) --> automatic gearbox
- 318i 4cyl 113hp from 12/1989 to 08/1992 (engine code M40B18) --> manual gearbox
- 318i 4cyl 113hp from 12/1991 to 03/1994 (engine code M40B18) --> automatic gearbox
- 318i 4cyl 116hp from 02/1993 to 06/1998 (engine code M43B18) --> automatic gearbox
- 318is 4cyl 140hp from 05/1993 to 01/1996 (engine code M42B18) --> automatic gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 07/1998 (engine code M44B19) --> automatic gearbox
- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox
- 320i 150hp from 09/1992 to 09/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 12/1993 to 05/1998 (engine code M52B20) --> automatic gearbox

Touring :
- 316i 4cyl 102hp from 09/1996 to 05/1999 (engine code M43B16) --> automatic gearbox
- 318i 4cyl 116hp from 02/1995 to 05/1999 (engine code M43B18) --> automatic gearbox
- 320i 150hp from 05/1994 to 05/1999 (engine code M52B20) --> automatic gearbox

Compact :
- 316i 4cyl 102hp from 06/1993 to 12/1998 (engine code M43B16) --> automatic gearbox
- 316i 4cyl 1.9L 105hp from 01/1999 to 07/2000 (engine code M43B19) --> automatic gearbox
- 318ti 4cyl 140hp from 08/1994 to 01/1996 (engine code M42B18) --> automatic gearbox
- 318ti 4cyl 1.9L 140hp from 01/1995 to 08/2000 (engine code M44B19) --> automatic gearbox

Coupé :
- 316i 4cyl 102hp from 03/1993 to 03/1999 (engine code M43B16) --> automatic gearbox
- 318is 4cyl 140hp from 02/1991 to 08/1992 (engine code M42B18) --> manual gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 05/1999 (engine code M44B19) --> automatic gearbox
- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox
- 320i 150hp from 09/1992 to 07/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 01/1994 to 11/1998 (engine code M52B20) --> automatic gearbox

Cabriolet :
- 318i 4cyl 116hp from 11/1993 to 09/1999 (engine code M43B18) --> automatic gearbox
- 320i 150hp from 11/1992 to 04/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 05/1994 to 10/1999 (engine code M52B20) --> automatic gearbox

Screws and bolts not included.

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

This part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Located between the gearbox outlet and the drive shaft,

For E90 & E91:
- 316 i N45 & N45N (E90 only)
- 316 i N43 E90 (only for E90 with manual transmission)
- 318 i N43, N46 & N46N (manual transmission only)
- 320 i N43, N46 & N46N (manual transmission only)
- 320 si N45 (E90 only)

For E92 & E93:
- 316 i N43 (only for E92 with manual transmission)
- 320 i N43 & N46N (manual transmission only)

For E90 LCI & E91 LCI (manual transmission only):
- 316 i N45N (E90 only)
- 316 i N43
- 318 i N43 & N46N
- 320 i N43 & N46N

For E92 LCI & E93 LCI:
- 316 i N43 (E92 only)
- 318 i N43
- 320 i N43 & N46N (manual transmission only)

MEYLE HD range 110mm reinforced transmission flector for BMW 5 series E12 and E28:

E12 :
- 518 4cyl 90hp phase 1 from 05/1974 to 07/1976 (engine code M10B18) --> automatic gearbox
- 518 4cyl 90hp phase 2 from 08/1976 to 05/1981 (engine code M10B18) --> automatic gearbox
- 518 4cyl 90cv phase 2 from 09/1980 to 05/1981 (engine code M10B18) --> manual gearbox
- 518i 4cyl 100hp phase 2 from 09/1980 to 06/1981 (engine code M10B18i) --> manual gearbox
- 520 4cyl 115hp phase 1 from 05/1975 to 07/1976 (engine code M10B20) --> automatic gearbox
- 520 4cyl 115hp phase 2 from 08/1976 to 06/1981 (engine code M10B20) --> automatic gearbox
- 520-6 6cyl 122hp phase 2 from 09/1980 to 06/1981 (engine code M20B20) --> manual gearbox
- 520-6 6cyl 122hp phase 2 from 08/1977 to 06/1981 (engine code M20B20) --> automatic gearbox

MEYLE HD range 110mm reinforced transmission selector for BMW 5 series E34 Sedan and Touring :

Sedan :
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18) --> manual and automatic gearboxes
- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20) --> manual and automatic gearboxes
- 520i 150hp phase 1 from 05/1990 to 12/1990 (engine code M50B20) --> manual gearbox
- 520i 150hp phase 1 from 09/1990 to 08/1992 (engine code M50B20) --> automatic gearbox
- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU) --> automatic gearbox
- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU) --> automatic gearbox
- 525ix 192hp phase 1 from 04/1991 to 08/1992 (engine code M50B25) --> manual and automatic gearboxes
- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU) --> manual and automatic gearboxes
- 525ix 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU) --> manual and automatic gearboxes
- 524td 115hp phase 1 from 07/1987 to 08/1991 (engine code M21D24) --> automatic transmission

Touring :
- 520i 150hp phase 1 from 11/1990 to 12/1990 (engine code M50B20) --> manual gearbox
- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20) --> automatic gearbox
- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU) --> automatic gearbox
- 520i 150hp phase 2 from 04/1994 to 06/1996 (engine code M50B20TU) --> automatic gearbox
- 525ix 192hp phase 1 from 07/1991 to 08/1992 (engine code M50B25) --> manual and automatic gearboxes
- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU) --> manual and automatic gearboxes
- 525ix 192hp phase 2 from 04/1994 to 03/1996 (engine code M50B25TU) --> manual and automatic gearboxes

Screws and bolts not supplied.

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Located in the centre position between the two halves of the drive shaft,

For E60 LCI & E61 LCI:
- 520 i N46N (E60 only)
- 520 i N43

MEYLE HD range 110mm reinforced transmission selector for BMW Z3 E36 Roadster :

- 1.9 16V 4cyl 140cv phase 1 from 04/1995 to 04/1999 (engine code M44B19) --> automatic gearbox

Screws and bolts not supplied.

Dimensions :
- Mounting centres: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Reinforced, more rigid version for longer life,

For Roadster (E85):
- 2.0 i N46

For Saloon & Touring:
- 316i N42 & N46: automatic gearbox
- 318i N42 & N46: automatic gearbox
- 318d M47: manual gearbox
- 318d M47N: manual and automatic gearbox
- 320d M47 & M47N: manual and automatic gearbox
- 320i M52 & M54: automatic gearbox
- 323i M52 (Saloon only): automatic gearbox
- 325i M54: automatic gearbox (and sequential gearbox from 09/01 ->)
- 328i M52: manual gearbox
- 330i M54: manual gearbox

For Coupé & Cabriolet:
- 318Ci N42 & N46: automatic gearbox
- 320Cd M47N: manual and automatic gearbox (manual on Cabriolet)
- 320Ci M54: automatic gearbox
- 323Ci M52: automatic gearbox
- 325Ci M54: automatic gearbox (and sequential gearbox from 09/01 ->)
- 328Ci M52: manual gearbox
- 330Ci M54: manual gearbox

For Compact:
- 316ti N42 & N46: automatic gearbox
- 318td M47: manual gearbox
- 318ti N42 & N46: automatic gearbox
- 320td M47N: manual and automatic gearbox
- 325ti M54: automatic gearbox

Located between the gearbox outlet and the drive shaft,

For E90 & E91:
- 316 i N43 (E90 with automatic transmission only)
- 318 d M47N2 & N47
- 318 i N43, N46 & N46N (automatic transmission only)
- 320 d M47N2
- 320 d N47 (automatic transmission only)
- 320 i N43, N46 & N46N (automatic transmission only)
- 323 i N52 & N52N
- 325 i N52, N52N & N53
- 328 i N51 (E90 only)
- 330 i N52, N52N & N53

For E92 & E93:
- 316 i N43 (E92 with automatic transmission only)
- 320 d N47 (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E93 only)
- 330 i N52N & N53

Located between the gearbox outlet and the drive shaft,

For E90 LCI & E91 LCI:
- 316 d N47 (E90 only)
- 316 d N47N
- 316 i N45N (E90 automatic transmission only)
- 316 i N43 (automatic transmission only)
- 318 d N47 & N47N
- 318 i N43 & N46N (automatic transmission only)
- 320 d N47 & N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E90 only)
- 330 i N52N & N53

For E92 LCI & E93 LCI:
- 320 d N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E93 only)
- 330 i N52N & N53

For E34:
- 524td M21
- 525td/tds M51
- 525 i/ix manual gearbox M20 and M50
- 530i M30 and M60
- 535i manual gearbox M30 and M60

For E39 Touring:
- 520i M52 automatic gearbox from 09/98->
- 520i M54 automatic gearbox
- 525tds
- 523i, 525i, 528i, 530i

For E39 Saloon:
- 520i M52 automatic gearbox from 09/98->
- 520i M54 automatic gearbox
- 523i automatic gearbox
- 523i up to 09/96 with manual gearbox only
- 525i automatic gearbox
- 525td/tds (including automatic gearbox)
- 528i, 530i
- 535i 235hp and 145hp

MEYLE HD transmission selector for Bmw 1 Series:
Bmw 1 Series F20 :
- 116i 4cyl 136hp from 07/2010 to 02/2015 (engine code n13b16a)- 118i 4cyl 170hp from 07/2010 to 02/2015 (engine code n13b16a)- 125i 4cyl 218hp from 07/2010 until 02/2015 (engine code n20b20a)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 09/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 12/2010 to 02/2015 (engine code n47n)- 118d 4cyl 143hp from 07/2010 until 02/2015 (engine code n47n)- 120d 4cyl 184hp from 07/2010 until 02/2015 (engine code n47n)- 116i 3cyl 109hp from 07/2014 to 06/2019 (engine code b38b15a)- 118i 4cyl 170hp from 08/2014 to 07/2015 (engine code n13b16a)- 118i 3cyl 136hp from 05/2014 to 06/2019 (engine code b38b15a)- 120i 4cyl 177hp from 06/2014 to 06/2016 (engine code n13b16a)- 120i 4cyl 184hp from 01/2016 to 12/2019 (engine code b48b20a)- 125i 4cyl 218hp from 05/2014 to 06/2016 (engine code n20b20a)- 125i 4cyl 224hp from 01/2016 to 06/2019 (engine code b48b20a)- 114d 4cyl 95hp from 07/2014 until 05/2015 (engine code n47n)- 114d 3cyl 95hp from 07/2014 to 06/2016 (engine code b37d15a)- 116d 3cyl 116hp from 05/2014 to 06/2019 (engine code b37d15a)- 116de 3cyl 116hp from 07/2014 to 06/2017 (engine code b37d15a)- 118d 4cyl 150hp from 06/2014 to 06/2019 (engine code b47d20a)- 118xd 4cyl 150hp from 07/2015 to 05/2019 (engine code b47d20a)- 120d 4cyl 190hp from 06/2014 to 06/2019 (engine code b47d20a)- 120xd 4cyl 190hp from 07/2015 to 06/2019 (engine code b47d20a)
This reinforced part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD transmission selector for Bmw 1 Series:
Bmw 1 Series F21 :
- 116i 4cyl 136hp from 12/2011 to 02/2015 (engine code n13b16a)- 118i 4cyl 170hp from 07/2012 to 02/2015 (engine code n13b16a)- 125i 4cyl 218hp from 07/2010 to 02/2015 (engine code n20b20a)- 114d 4cyl 95hp from 07/2012 to 02/2015 (engine code n47n)- 116de 4cyl 116hp from 12/2011 to 02/2015 (engine code n47n)- 116d 4cyl 116hp from 01/2012 to 02/2015 (engine code n47n)- 118d 4cyl 143hp from 07/2010 to 02/2015 (engine code n47n)- 120d 4cyl 184hp from 07/2012 to 02/2015 (engine code n47n)- 118i 3cyl 136hp from 05/2014 to 06/2019 (engine code b38b15a)- 118i 4cyl 170hp from 10/2014 to 06/2015 (engine code n13b16a)- 120i 4cyl 177hp from 06/2014 to 06/2016 (engine code n13b20a)- 120i 4cyl 184hp from 10/2015 to 06/2019 (engine code b48b20a)- 125i 4cyl 218hp from 09/2014 to 06/2016 (engine code n20b20a)- 125i 4cyl 224hp from 10/2015 to 06/2019 (engine code b48b20a)- 114d 4cyl 95hp from 07/2012 until 02/2015 (engine code n47n)- 114d 3cyl 95hp from 06/2015 until 05/2019 (engine code b37d15a)- 116d 3cyl 116hp from 08/2014 to 05/2019 (engine code b37d15a)- 116de 3cyl 116hp from 07/2014 to 06/2017 (engine code b37d15a)- 118d 4cyl 150hp from 06/2014 to 06/2019 (engine code b47d20a)- 118xd 4cyl 150hp from 07/2015 to 05/2019 (engine code b47d20a)- 120d 4cyl 190hp from 06/2014 to 06/2019 (engine code b47d20a)- 120xd 4cyl 190hp from 07/2015 to 06/2019 (engine code b47d20a)
This reinforced part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD transmission selector for Bmw 7 Series:

Bmw E23 :

- 728i 6cyl 184hp from 09/1980 to 05/1986 manual gearbox (engine code m30b28)
- 728is 6cyl 184hp from 03/1981 to 04/1986 manual gearbox (engine code m30b28)
- 732i 6cyl 197hp from 09/1980 to 05/1986 manual gearbox (engine code m30b32)
- 733i 6cyl 197hp from 09/1980 to 07/1982 manual gearbox (engine code m30b32)
- 735i 6cyl 218hp from 09/1980 to 06/1986 manual gearbox (engine code m30b34)

Warning! Not suitable for automatic gearbox versions.

Screws and bolts not included.

This reinforced part offers optimized quality compared to theoriginal, with design defects corrected and greater strength for improved durability and roadholding.

MEYLE HD transmission selector for BMW 7 Series E32:

BMW 7 Series E32 :

- 730i 6cyl 197hp from 07/1986 to 04/1994 (engine code m30b30)
- 730iL 6cyl 197hp from 12/1987 to 03/1994 (engine code m30b30)
- 730i 8cyl 218hp from 05/1991 to 04/1994 (engine code m60b30)
- 730iL 8cyl 218hp from 06/1992 to 03/1994 (engine code m60b30)
- 735i 6cyl 220hp from 10/1985 to 07/1992 (engine code m30b35)
- 735iL 6cyl 220hp from 06/1987 to 07/1992 (engine code m30b35)

Not suitable for Bmw 7 Series E32 740i m60b40 and 750i m70.

This reinforced part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Screws and bolts not included.

Mounting centres: 96 mm (6 holes)
Outside diameter: 135 mm
Inside diameter: 50 mm
Thickness: 30 mm