Transmission coupling

For Saloon:
- 323i M52 (automatic gearbox)
- 325td M51 (manual gearbox)
- 325tds M41 (manual and automatic gearbox)
- 325i M50 up to 06/91 (manual gearbox)
- 325i M50 from 11/90 -> (automatic gearbox)
- 328i M52 (manual and automatic gearbox)

For Touring:
- 323i M52 (manual and automatic gearbox)
- 325tds M51 (manual and automatic gearbox)
- 328i M52 (manual and automatic gearbox)

For Coupé:
- 323i M52 (automaticgearbox)
- 325i M50 (manual and automatic gearbox)
- 328i M52 (manual and automatic gearbox)

For Cabriolet:
- 323i M52 (automatic gearbox)
- 325i M52 (automatic gearbox)
- 328i M52 (manual and automaticgearbox)

For Compact:
- 323ti M52 (automatic gearbox)

For E12 with manual gearbox from 09/80 ->
- 525 M30
- 528i M30
- 535i M30

For E28 with manual gearbox:
- 524td M21 from 01/86 ->
- 525e M20 from 03/86 ->
- 525i M30
- 528i M30
- 535i & M535i M50
- M5 S38

Located between the gearbox output and the transmission shaft,

For Roadster (E85):
- 2.2 i M54 (automatic transmission only)
- 2.5 i M54 (auto + sequential manual transmission)
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54 (automatic + manual transmission)
- 3.0 si N52

For Coupé (E86):
- 3.0 si N52

110mm transmission selector MECATECHNIC for BMW 3 series E21:

- 315 1.6L 75hp from 11/1980 to 12/1983 (engine code M10B16) --> manual gearbox
- 316 1.8L 90hp from 10/1980 to 09/1983 (engine code M10B18) --> manual and automatic gearboxes
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18) --> automatic gearbox
- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i) --> manual and automatic gearboxes
- 320 4cyl 109hp from 02/1975 to 10/1982 (engine code M10B20) --> automatic gearbox
- 320-6 6cyl 122hp from 09/1980 to 12/1982 (engine code M20B20) --> manual gearbox
- 320-6 6cyl 122hp from 08/1977 to 12/1982 (engine code M20B20) --> automatic gearbox
- 323i 6cyl 143hp from 09/1980 to 10/1982 (engine code M20B23) --> manual gearbox
- 323i 6cyl 143hp from 07/1977 to 10/1982 (engine code M20B23) --> automatic gearbox

ATTENTION: On 318 and 320 4 cyl M10 with automatic gearbox, a 2nd mounting is possible with 8 holes, external diameter 105mm!

Fasteners not supplied.

Dimensions :
Mounting centres: 78mm (6 holes)
Outside diameter: 110mm
Inside diameter: 40mm
Thickness: 28mm

Located at the front of the drive shaft

For Saloon:
- 1502

Check your flex disc, as there are several different fitments

Located between the gearbox output and the transmission shaft,

For E81 & E87 LCI with manual transmission:
- 116 i 1.6 N43 & N45N
- 116 i 2.0 N43
- 118 i N43 & N46N
- 120 i N43 & N46N

For E82 & E88 with manual transmission:
- 118 i N43 & N46N (E88 only)
- 120 i N43 & N46N

For E87 with manual gearbox:
- 116 i N45
- 118 i N46
- 120 i N46

For E30 Saloon, Estate, Cabriolet:
- 316 i 90 hp, 100 hp manual gearbox and automatic
- 318 i102 hp, 105 hp, 113 hp manual gearbox and automatic
- 318 iS140 hp
-320 i 125 hp, 129 hp manual gearbox and automatic
- 320 iS 141 hp
- 323 i 150 hp manual gearbox and automatic
- 324 D 86 hp manual gearbox and automatic
- 324 TD 115 hp manual gearbox and automatic
- 325 i/ iX170 hp, 171 hp manual gearbox and automatic
- 325 e 122 hp, 129 hpmanual gearbox and automatic ->03/86

110mm Transmission Flector for BMW 3 Series E36 Sedan, Touring, Compact, Coupé and Cabriolet :

Sedan :
- 316i 4cyl 100hp from 12/1990 to 08/1992 (engine code M40B16) --> manual gearbox
- 316i 4cyl 100hp from 12/1991 to 02/1994 (engine code M40B16) --> automatic gearbox
- 316i 4cyl 102hp from 02/1993 to 09/1998 (engine code M43B16) --> automatic gearbox
- 318i 4cyl 113hp from 12/1989 to 08/1992 (engine code M40B18) --> manual gearbox
- 318i 4cyl 113hp from 12/1991 to 03/1994 (engine code M40B18) --> automatic gearbox
- 318i 4cyl 116hp from 02/1993 to 06/1998 (engine code M43B18) --> automatic gearbox
- 318is 4cyl 140hp from 05/1993 to 01/1996 (engine code M42B18) --> automatic gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 07/1998 (engine code M44B19) --> automatic gearbox
- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox
- 320i 150hp from 09/1992 to 09/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 12/1993 to 05/1998 (engine code M52B20) --> automatic gearbox

Touring :
- 316i 4cyl 102hp from 09/1996 to 05/1999 (engine code M43B16) --> automatic gearbox
- 318i 4cyl 116hp from 02/1995 to 05/1999 (engine code M43B18) --> automatic gearbox
- 320i 150hp from 05/1994 to 05/1999 (engine code M52B20) --> automatic gearbox

Compact :
- 316i 4cyl 102hp from 06/1993 to 12/1998 (engine code M43B16) --> automatic gearbox
- 316i 4cyl 1.9L 105hp from 01/1999 to 07/2000 (engine code M43B19) --> automatic gearbox
- 318ti 4cyl 140hp from 08/1994 to 01/1996 (engine code M42B18) --> automatic gearbox
- 318ti 4cyl 1.9L 140hp from 01/1995 to 08/2000 (engine code M44B19) --> automatic gearbox

Coupé :
- 316i 4cyl 102hp from 03/1993 to 03/1999 (engine code M43B16) --> automatic gearbox
- 318is 4cyl 140hp from 02/1991 to 08/1992 (engine code M42B18) --> manual gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 05/1999 (engine code M44B19) --> automatic gearbox
- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox
- 320i 150hp from 09/1992 to 07/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 01/1994 to 11/1998 (engine code M52B20) --> automatic gearbox

Cabriolet :
- 318i 4cyl 116hp from 11/1993 to 09/1999 (engine code M43B18) --> automatic gearbox
- 320i 150hp from 11/1992 to 04/1995 (engine code M50B20TU) --> automatic gearbox
- 320i 150hp from 05/1994 to 10/1999 (engine code M52B20) --> automatic gearbox

Screws and bolts not included.

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

Located between the gearbox outlet and the drive shaft,

For E90 & E91:
- 316 i N45 & N45N (E90 only)
- 316 i N43 E90 (only for E90 with manual transmission)
- 318 i N43, N46 & N46N (manual transmission only)
- 320 i N43, N46 & N46N (manual transmission only)
- 320 si N45 (E90 only)

For E92 & E93:
- 316 i N43 (only for E92 with manual transmission)
- 320 i N43 & N46N (manual transmission only)

For E90 LCI & E91 LCI (manual transmission only):
- 316 i N45N (E90 only)
- 316 i N43
- 318 i N43 & N46N
- 320 i N43 & N46N

For E92 LCI & E93 LCI:
- 316 i N43 (E92 only)
- 318 i N43
- 320 i N43 & N46N (manual transmission only)

Flector de transmission 110mm Topran pour BMW série 5 E12 et E28 :
Bmw Série 5 E12 :
- 518 4cyl 90cv phase 1 du 05/1974 au 07/1976 (code moteur M10B18) --> boîte automatique- 518 4cyl 90cv phase 2 du 08/1976 au 05/1981 (code moteur M10B18) --> boîte automatique- 518 4cyl 90cv phase 2 du 09/1980 au 05/1981 (code moteur M10B18) --> boîte manuelle- 518i 4cyl 100cv phase 2 du 09/1980 au 06/1981 (code moteur M10B18i) --> boîte manuelle- 520 4cyl 115cv phase 1 du 05/1975 au 07/1976 (code moteur M10B20) --> boîte automatique- 520 4cyl 115cv phase 2 du 08/1976 au 06/1981 (code moteur M10B20) --> boîte automatique- 520-6 6cyl 122cv phase 2 du 09/1980 au 06/1981 (code moteur M20B20) --> boîte manuelle- 520-6 6cyl 122cv phase 2 du 08/1977 au 06/1981 (code moteur M20B20) --> boîte automatique
Bmw Série 5 E28 :
- 518 4cyl carbu 90cv du 11/1980 au 09/1984 (code moteur M10B18) --> boîte manuelle- 518i 4cyl 105cv du 05/1981 au 12/1987 (code moteur M10B18) --> boîte manuelle et automatique- 520i 6cyl 125cv du 11/1980 au 12/1987 (code moteur M20B20) --> boîte manuelle et automatique- 524d 6cyl 84cv du 05/1986 au 12/1987 (code moteur M21D24) --> boîte manuelle- 524td 6cyl 115cv du 10/1982 au 12/1985 (code moteur M21D24T) --> boîte manuelle- 524td 6cyl 115cv du 10/1982 au 12/1987 (code moteur M21D24T) --> boîte automatique- 525e 6cyl 2.7L 125cv du 11/1982 au 02/1986 (code moteur M20B27) --> boîte manuelle- 525e 6cyl 2.7L 125cv du 09/1983 au 12/1987 (code moteur M20B27) --> boîte automatique
La visserie n'est pas fournie.
Dimensions :Entraxes de fixation : 78mm (6 trous)Diamètre extérieur : 110mmDiamètre intérieur : 40mmÉpaisseur : 28mm

Transmission flex disc, dimensions:
Attachments centre-to-centre : 78mm
Outer diameter: 110mm
Inner diameter: 40mm
Thickness: 28mm
Suitable for:

BMW 5 Series E34 Saloon & Touring (Estate):
- 518 i 1.8 113hp manual gearbox and automatic
- 520 i 2.0 125hp, 129hp manual gearbox and automatic
- 520 i 2.0 24V 150hp manual gearbox and automatic
- 524 Td 2.4 TD 115hp manual gearbox and automatic
- 525 iX 2.5 24V 192hp manual gearbox and automatic

Located in the centre position between the two halves of the drive shaft,

For E60 LCI & E61 LCI:
- 520 i N46N (E60 only)
- 520 i N43

For Roadster with gearbox automatic :
- 1.9 M44

110mm transmission selector MECATECHNIC for BMW Z4 E85 Roadster:

- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)
- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)

Screws and bolts not included.

Dimensions :
- Mounting centres: 78mm (6 holes)
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing is designed for M10X50-10.9 screws with M10 self-locking hex nuts.

FEBI branded 110 mm drilling circle transmission bearing for BMW series 3 E46 :

Sedan and Touring manual transmission :
- 330d phase 1 184cv from 12/1998 to 08/2001 (engine code M57D30)
- 330d phase 2 204cv from 09/2001 to 07/2005 (engine code M57D30TU)

Coupe and Cabriolet manual transmission :
- 330cd phase 2 204cv from 08/2002 to 08/2006 (engine code M57D30TU)

Flector dimensions :
Fixing centers : 110 mm
External diameter : 162 mm
Inner diameter : 44 mm
Thickness : 40mm

FEBI branded 110 mm drilling circle transmission bearing for BMW series 5 E39 :

Sedan and Touring manual transmission :
- 520d 136cv from 1999 to 2004 (engine code M47)
- 525d 163cv from 2000 to 2004 (engine code M57)
- 530d 184cv from 1998 to 2000 (engine code M57)
- 530d 193cv from 2000 to 2004 (engine code M57)

Flector dimensions :
Fixing centers : 110 mm
External diameter : 162 mm
Inner diameter : 44 mm
Thickness : 40mm

Flector Transmission FEBI for Bmw 7 Series E38 :

Bmw 7 Series E38 :

- 730D 6 cyl 193hp from 12/1997 to 07/2001 (engine code m57d30)
- 740D 8cyl 245hp from 07/1998 to 07/2001 (engine code m67 bi-turbo)

WARNING: Not suitable for Bmw 7 Series E38 725tds engine code m51d25.

Located between the gearbox outlet and the drive shaft,

For E90 & E91:
- 316 i N43 (E90 with automatic transmission only)
- 318 d M47N2 & N47
- 318 i N43, N46 & N46N (automatic transmission only)
- 320 d M47N2
- 320 d N47 (automatic transmission only)
- 320 i N43, N46 & N46N (automatic transmission only)
- 323 i N52 & N52N
- 325 i N52, N52N & N53
- 328 i N51 (E90 only)
- 330 i N52, N52N & N53

For E92 & E93:
- 316 i N43 (E92 with automatic transmission only)
- 320 d N47 (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E93 only)
- 330 i N52N & N53

Located between the gearbox outlet and the drive shaft,

For E90 LCI & E91 LCI:
- 316 d N47 (E90 only)
- 316 d N47N
- 316 i N45N (E90 automatic transmission only)
- 316 i N43 (automatic transmission only)
- 318 d N47 & N47N
- 318 i N43 & N46N (automatic transmission only)
- 320 d N47 & N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E90 only)
- 330 i N52N & N53

For E92 LCI & E93 LCI:
- 320 d N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E93 only)
- 330 i N52N & N53

For E34:
- 524 td
- 525 td / tds M51
- 525 i / iX manual gearbox M20 and M50
- 530 i M30 and M60
- 535 i manual gearbox M30 and M60