Timing

These pins are essential when replacing the belt on Ducati 1000cc and 1100cc engines.

Applications: Hypermotard 1100, 1100 EVO, 1100 EVOSP, 1100S.1100SP 2007-2013, Hypermotard 796 2009-2013, Monster 1000, 1000S, 1100, 1100S, 1100 EVO.696, 796 2009-2013, Monster S2R 1000 2006-2008, Multistrada 1000DS, 1000 SDS 2003-2006

Size: M8 x 1.25 mm

Do not forget the camshaft pulley block ref TB04812 and the crankshaft rotation tool ref UO10169.

Applications: Hypermotard, Monster, Multistrada, Sport Classic, Sporttouring, Streetfighter, Superbike, Supersport MH900e, Diavel (carbone)

This tool is used to hold the camshaft pulley when loosening or tightening the nut.

It is suitable for Ducati Pantah models and other 2 and 4-valve belt drives in the 916.

You can use the camshaft timing pins for Ducati part number TB04813.

For Ducati: 748,916, 996 & DesmoQuattro
Material: aluminium alloy steel

For Ducati: 749, 999, 748, 916, 996 & DesmoQuattro with Testastretta engine
Material: aluminium alloy steel

These camshaft retaining pins are essential when replacing the belt or removing the cylinder head.

They are specific to V-engines, 2-valve 620 CC models 695, 750, 800, 900 equipped with a separate camshaft pulley.

You can use the Ducati camshaft pulley block part number TB04812 to do this task.

- for locking the camshaft when replacing the
timing belt, checking the engine timing, etc.
- suitable for Ducati models 851, 888, 916 and 996
- material: aluminum alloy steel, anodized

1 timing belt + 1 tensioning roller for engines:
- 1.5 / 1.6 Diesel /1.6 turbo-Diesel, 50hp ->80hp
(CK / CR / JR / JK / CY / JP / RA / SB /ME / 1V / MF / CS / JX)
- 1.7 Diesel (KY)

For:
- Golf 1 & Golf 2
- Jetta 1& Jetta 2
- Passat 1, 2 & 3
- Transporter T25 / T3

Damper pulley, crankshaft vibration damper for VW LT from 1996 to 2006 :
- 2.5 SDi 75hp (AGX)
- 2.5 TDi 83hp (BBE) up to engine no. 002146
- 2.5 TDi 90hp (APA)
- 2.5 TDi 95hp (BBF) up to engine no. 002468
- 2.5 TDI 102hp (AHD)
- 2.5 TDi 109hp (ANJ) up to engine no. 054792

Damper pulley.Crankshaft vibration damper for VW Transporter T4 since 01/1995 :- 2.4 Diesel 78hp (AAB) since engine n°320127
For VW Transporter T4 since 01/1996 :- 2.4 Diesel 75hp (AJA)- 2.4 Diesel 78hp (AAB)- 2.5 TDi 88hp (AJT, AYY)- 2.5 TDi 102hp (ACV, AUF, AYC, AXL)- 2.5 TDi151hp (AHY, AXG)

For Saloon:
- 2.5 TDi (AAT)

For Avant:
- 2.5 TDi (AAT)
- 2.5 TDi 140 hp (AEL) including Quattro

TOPRAN Damper pulley.Crankshaft vibration damper for VW Transporter T4 since 01/1995 :- 2.4 Diesel 78hp (AAB) since engine n°320127
For VW Transporter T4 since 01/1996 :- 2.4 Diesel 75hp (AJA)- 2.4 Diesel 78hp (AAB)- 2.5 TDi 88hp (AJT, AYY)- 2.5 TDi 102hp (ACV, AUF, AYC, AXL)- 2.5 TDi151hp (AHY, AXG)

Crankshaft pulley with vibration damper,

For E60 & E61:
- 525 d M57N
- 530 d M57N
- 530 d/xd M57N2
- 535 d M57N

For E60 LCI & E61 LCI:
- 525 d/xd M57N2
- 530 d/xd M57N2
- 535 d M57N2

Crankshaft pulley with vibration damper,

For E90 & E91:
- 325 d M57N2
- 330 d/xd M57N2
- 335 d M57N2

For E92 & E93:
- 325 d M57N2
- 330 d M57N2
- 330 xd M57N2 (E92 only)
- 335 d M57N2 (E92 only)

For E90 LCI, E91 LCI & E92 LCI:
- 325 d M57N2 (except E92)
- 335 d M57N2

Crankshaft pulley with vibration dampers for Bmw X5 : Bmw X5 E70 : - 3.0D 6cyl 235hp from 02/2006 to 03/2010 (engine code m57d30n2)
- 3.0SD 6cyl 286hp from 01/2007 to 03/2010 (engine code m57d30n2 Bi-Turbo)
Bmw X5 E70 Lci : - 35XD USA 6cyl 245hp from 08/2009 to 06/2013 (engine code m57d30n2)
Supplied without mounting screws .

During assembly, it is imperative to respect the tightening torque (see manual) and also to replace the 4 pulley fixing screws (part no. BC35976, to be ordered separately on our site).
Don't forget to replace the spacer washer on your old damper pulley.

For X5 E53:
- 3.0 d M57N

Crankshaft pulley with vibration dampers brand TOPRAN for BMW series 3 E46 Sedan,Touring,Coupeand Cabrioletphase 2 with 6-cylinder diesel 204hp engine :

Berline:
- 330d 204hp phase 2 from 08/2002 to 02/2005 (engine code M57D30TU)
- 330xd 204hp phase 2 from 09/2002 to 12/2004(engine code M57D30TU)

Touring:
- 330d 204hp phase 2 from 09/2002 to 07/2005 (engine code M57D30TU)
- 330xd 204hp phase 2 from 08/2002 to 05/2005 (engine code M57D30TU)

Coupé:
- 330cd 204hp phase 2 from 08/2002 to 05/2006 (engine code M57D30TU)

Cabriolet:
- 330cd 204hp phase 2 from 11/2004 to 08/2006 (engine code M57D30TU)

Number of grooves (1): 4
Number of grooves (2): 6
Outer diameter (1): 170 mm
Outer diameter (2): 192 mm
Height: 73 mm

Delivered without mounting screws.

During the assembly, it is imperative to respect the tightening torque (see manual) but also to replace the 4 fixing screws of the pulley (reference BC35976 to be ordered separately on our site).
Don't forget to put back the spacer washer present on your old damper pulley.

Damper pulley for BMW X3 E83 and LCI 6-cylinder diesel:

BMW X3 E83 :

- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

BMX X3 E83 LCI :

- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)
- 3.0sd 6cyl 286hp from 03/2006 to 06/2008 (engine code M57D30TU2TOP) --> bi-turbo
- xDrive35d 6cyl 3.0L 286hp from 07/2008 to 08/2010 (engine code M57D30TU2TOP) --> twin-turbo 3.0d engine
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)

Supplied without mounting screws.

When fitting, it is essential to observe the tightening torque (see manual) and also to replace the 4 pulley fixing screws (part no. BC35998, to be ordered separately on our site).
Don't forget to replace the spacer washer on your old damper pulley.

For VW Transporter T4, Multivan:
- 2.5 TDi 102hp (ACV, AUF, AYC)

For VW Transporter T4, Multivan:
- 2.5 TDi 88hp (AJT, AYY)
- 2.5 TDi 102hp (AXL) Syncro
- 2.5 TDi 151hp (AHY, AXG)