Chassis & structure

Rear panel for Volkswagen Lupo
For VW Lupo all petrol models
Genuine Volkswagen part

The front panel for VW Golf 1 Cabriolet and Sedan supports the headlights, grille, coolant radiator and front engine mount.

This front panel for Volkswagen Golf mk1 in metal is said to be "adaptable", as it does not come from the manufacturer.
It is supplied in black stock paint. Before final painting, it's essential to treat and prepare the front panel to prevent corrosion from quickly reappearing.

The front end generally suffers from rust and various impacts throughout its life.

This VW Golf 1 front panel will fit the following models:
- Golf 1 Sedan from 1979 to 1984, up to chassis number ->17-E-299999
- Golf 1 Cabriolet from 1979 to 1987, for 3-part grille, but can be adapted to more recent Cabriolet models
- Caddy all years

This Front Floor for Renault 4 (10/1961-01/1994) is a quality reproduction.

This Front Floor for R4 is true to the original. It is compatible with all models of 4L sedan and van.

Rear floor plate above the engine.
Only model available for all years.

Intended for VW Cox (08/67-07/79)
For use on pre 58 or post 79 Beetles or Cabriolet, modifications or adjustments will be required.

Ce plancher complet pour Renault 4 (10/1961-12/1993) est compatible avec tous les modèles de 4L berline.Ce plancher complet pour R4 est en tôle électrozinguée, cette reproduction de qualité fabriquée en Europe offre une protection à la corrosion supérieure à la tôle d'origine.

Rear left seal cover for 3, 3 or 5-door Golf rocker panels
For versions: GTi, GT, GTD, TDi, GLi, VR6
The profile on the edge of the cover should be handled with extreme care, as it detaches easily from the strip. Any claim made outside the incident at the time of delivery will not be taken into account.

Right-hand rear seam cover for 3, 3 or 5-door Golf rocker panels
For versions: GTi, GT, GTD, TDi, GLi, VR6
The profile on the edge of the gasket cover should be handled with extreme care, as it detaches easily from the strip. Any claim made outside the incident at the time of delivery will not be taken into account.

DANSK complete floorpan with the sub-frame for Porsche 911, 912 and 930 from 1965 to 1989 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / E / S from 1967 to 1969 - short and long Wheel base
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

Supplied with front crossmember brackets

For left-hand drive vehicle.

Lower front panel for Bmw 3 Series :
Bmw 3 Series E30 Cabriolet:
- 318i 115hp from 07/1990 to 09/1990 (engine code M40B18)- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25)
Over the course of its life, the front end of your BMW usually shows signs of rust, impacts and other knocks.
The lower part of the front panel is delivered in black storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This front skirt in high-quality sheet metal under the bumper is compatible with BMW 3 series E30 phase 1 petrol :

- 4-door saloon :
- 316 90hp phase 1 from 09/1985 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 09/1985 to 08/1987 (engine code M10B18i)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 323i 6cyl 150hp phase 1 from 09/1985 to 09/1986 (engine code M20B23)
- 325e 6cyl 122hp phase 1 from 09/1985 to 08/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 09/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)

2-door coupé :
- 316 90hp phase 1 from 09/1985 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 09/1985 to 08/1987 (engine code M10B18i)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 323i 6cyl 150hp phase 1 from 09/1985 to 09/1986 (engine code M20B23)
- 325e 6cyl 122hp phase 1 from 09/1985 to 09/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 09/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 09/1985 to 08/1987 (engine code M20B25)

WARNING: Not suitable for M3, Touring or diesel versions!

Over the course of its life, the front end of your BMW usually shows signs of rust, impacts and other knocks.

The lower part of the front panel is delivered in stock black paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This metal front body panel is called "adaptable" because it does not come from the manufacturer.

For VW Golf 1 Cabriolet with Karmann Kit from 1988 onwards -> for VW Golf 1 Cabriolet with Karmann Kit from 1988 onwards

Right-hand half-floor template
with centre dome.

For Beetle all versions from 08/1972->
Hatchback& Cabriolet: 1200 & 1303
from chassis no. 113 2000 001->

Suitable for:
- Golf 1 and Jetta 1
- Golf 1 Cabriolet up to ->07/85
- Golf 1 Caddy
- Scirocco up to ->07/85

Left-hand half-floor template
with centre dome.

For Beetle all versions from 08/1972->
Hatchback& Cabriolet: 1200 & 1303
from chassis no. 113 2000 001->

Original type left-hand side heating duct.
Panel under duct included.

For Beetle, from 08/1968->
from chassis no.119 000 001->
(except 1302 & 1303).

This rear left interior crossmember for Volkswagen Beetle is compatible with all models from July 1967 onwards.
This interior chassis reinforcement is one of the favorite places for rust on Beetle chassis, especially under the rear seat.
For VW Beetle sedans and convertibles from July 1967 onwards

This rear panel is compatible with BMW 3 series:
Bmw 3 Series E30 Convertible :
- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25)
Over the course of its life, the rear end of your BMW usually suffers from rust, impacts and other knocks.
The body panel is delivered in black storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.
This metal rear body sheet is called "adaptable" because it is not supplied by the manufacturer.

This rear panel is compatible with BMW 3 Series E30 phase 1 petrol and diesel engines:

4-door saloon :
- 316 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)
- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325e 6cyl 122hp phase 1 from 01/1985 to 08/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)
- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)

2-door coupé :
- 316 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)
- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)
- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)
- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)
- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)
- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)
- 325e 6cyl 122hp phase 1 from 01/1985 to 09/1987 (engine code M20B27)
- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170hp phase 1 from 02/1985 to 08/1987 (engine code M20B25)

Cabriolet until 08/1990 :
- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)
- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25)

Over the course of its life, the rear end of your BMW usually suffers from rust, impacts and other knocks.

The body panel is delivered in black storage paint.
It will need to be treated and prepared to prevent corrosion from reappearing.
Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This metal rear body sheet is called "adaptable" because it is not supplied by the manufacturer.

Original type right-hand side heating duct.
Panel under duct included.

For Beetle, from 08/1968->
from chassis no. 119 000 001->
(except 1302 & 1303).

Top of the range refabrication front panel for BMW 02 Series E10 phase 1 from 03/1966 to 08/1973:

Sedan:
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1600ti 105cv phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120cv phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100cv phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130cv phase 1 from 04/1971 to 08/1973 (engine code M15)

Touring:
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1800 90hp phase 1 from 10/1971 to 08/1973 (engine code M10B18)
- 2000 100hp (M10) phase 1 from 04/1971 to 08/1973 (engine code M05)
- 2000A auto 100hp (M10) phase 1 from 05/1971 to 09/1972 (engine code M05)
- 2000tii 130cv (M10) phase 1 from 01/1971 to 08/1973 (engine code M15)

Convertible:
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Baur Targa convertible:
- 2002 100hp phase 1 from 06/1971 to 07/1973 (engine code M05)

Throughout its life, the front part of your BMW usually shows the presence of rust and various shocks. It cannot be dismantled, its replacement requires dismantling the old one and welding the new one, ensuring that everything is properly aligned.

The front facade is delivered bare in black storage paint. Before final painting, it is essential to treat and prepare it in order to prevent corrosion from reappearing.

Give a high quality body part to your E10!