Heater system

Tightening clamp, 100% stainless steel. This clamp does not damage the hose as the tightening notches are only on the external section of the clamp.

Enables the original sleeve to be fixed onto the heater unit and the bakelite part, part reference VC266001

Tightening clamp, 100% stainless steel. This clamp does not damage the hose as the tightening notches are only on the external section of the clamp.

Ventilation sleeve - Interior diameter: 25 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter 30 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 35 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Orange ventilation ducting - Inner diameter 38 mm
Steel spring covered with fibreglass, impregnated with neoprene.
This spring is welded to form a continuous surface.

Application temperature: - 55°C to + 260°C

Ventilation sleeve - Interior diameter 51 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter 57 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 63 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 70 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 76 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 80 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 83 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 89 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 102 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 35°c à + 135°c

Ventilation sleeve - Interior diameter: 102 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Ventilation sleeve - Interior diameter: 127 mm
Steel spring covered with neoprene impregnated glass fibre.
This spring is welded to form a continuous surface.
Temperature: - 55 °C to + 130 °C

Boa ventilation ducting - Interior diameter 140 mm
Steel spring covered with fibreglass, impregnated with neoprene.
This spring is welded to form a continuous surface.
Temperature: - 55°C to + 260°C

Boa ventilation ducting - Interior diameter 45 mm
Steel spring covered with fibre glass, impregnated with neoprene.
This spring is welded to form a continuous surface.
Temperature: - 55°C to + 260°C