Filter results
Validate filters
376,00 €
ATIThis complete suspension pot for AMI6 and AMI8 (04/1961-03/1979) - 130mm is a quality reproduction.
This large suspension pot for AMI6 and AMI8 is a crucial part of the suspension so particular to the 2CV and derivatives. With a diameter ...
Only 3 in stock
Only 3 in stock
Delivery mode
Collect at store Wambrechies (France) : Free
Home delivery : On estimate
Sent today by MECATECHNIC if ordered before 15h00
Description Product
This complete suspension pot for AMI6 and AMI8 (04/1961-03/1979) - 130mm is a quality reproduction.
This large suspension pot for AMI6 and AMI8 is a crucial part of the suspension so particular to the 2CV and derivatives. With a diameter of 130 mm it is suitable for the Vans, AMI 6 and 8 and heavier Mehari 4X4 benefiting from pots with a larger diameter.
This complete suspension pot is equipped with its tie rods, The short tie rod towards the front and the long one towards the rear, its rings and ends of adjustment, but also its bellows and ends of tie rods which connects it to the front and rear suspension arms.
Maintenance advice:
- The adjustment of the travel and the trim of the vehicle is done thanks to specific tools. A 46 wrench for adjusting the hex nuts on the adjusting tips and a hex socket for adjusting the tie rod tips.
- Proper lubrication is paramount to the proper operation of the suspension pot. Use oil instead of grease that is too thick. The inner springs will tend to push thick grease to the ends of the can causing a very unpleasant squeaking sound.
- the meticulous installation of a grease nipple on the upper outer quarter of the suspension housing will allow you to easily maintain the inner greasing of this suspension can.
Diameter (mm)
130
Quantity required
2
Customer review
No commentary about the product
Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website
Your questions
Vehicle compatibility