MECATECHNIC rear brake distributor for Audi Coupé B2 Type 81 (10/1980-07/1988)

Details about : MECATECHNIC rear brake distributor for Audi Coupé B2 Type 81 (10/1980-07/1988)

MECATECHNIC rear brake distributor for Audi Coupé B2 type 81 with drum brakes only:

- 1.8L GL 4 cylinders 75hp from 08/1981 to 07/1983 (engine code DD)
- 1.8L GT 90 4 cylinders 90hp from 08/1986 to 07/1988 (engine code DS)
- 1.8L GT 112 4 cylinders 112hp from 08/1986 to 07/1988 (engine code DZ)
- 1.9L GT5S 5 cylinders 115hp from 10/1980 to 07/1983 (engine code WN)
- 2.0L GT5E 115 5 cylinders 115hp from 08/1983 to 07/1986 (engine code JS)
- 2.1L GT5E 130 5 cylinders 130hp from 08/1982 to 07/1984 (engine code KE)

ATTENTION: Not suitable for Audi Coupé B2 type 85 Quattro or for models with rear disc brakes (2.2L GT 136 engine code KV)!

Located in front of the left rear wheel, the brake distributor (also known as compensator or pressure regulator) is used to reduce braking pressure on the rear wheels when the load is transferred to the front or when the trunk is heavily loaded. If the rear wheels are relieved when braking hard, or if the trunk is heavily loaded, there's a risk of the rear wheels locking up and losing braking efficiency. Its valve reduces rear pressure when it becomes too high (pre-set value) to maintain perfect control and vehicle stability.

Indispensable for keeping your car on the road safely, and no longer available on the market over the years, this part is an exclusive , high-quality MECATECHNIC remanufactured in Europe. Each distributor is fully tested and calibrated in the factory, offering the same rigorous quality as the original equipment part, according to strict specifications.