Rear wheel cylinder - STIB - with 8mm spanner fitting for 2cv vans -DOT4- 17.5mm - 8.125mm

Details about : Rear wheel cylinder - STIB - with 8mm spanner fitting for 2cv vans -DOT4- 17.5mm - 8.125mm

This rear wheel cylinder -STIB- with 8mm spanner fitting for AZU-B AK250 vans from January 1972 -DOT4 - 17.5mm - M8x1.25mm is high quality.

This rear wheel cylinder for 2cv saloons is faithful to the original.
Made in Europe, this STIB rear wheel cylinder is compatible with 2cv saloons and derivatives from June 1970 with front drum brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv4 AZL4 after 06/1970
- 2cv6 AZL6 from 06/1970 to 07/1981
- 2cv AZU AK250 after 01/1972
- Dyane 4 AYA2 after 06/1970
- Dyane 6 AYB after 06/1970
- Mehari from 01/1972 to 07/1977

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.