Reconditioned ATE front left caliper for Mercedes W123 - 60mm

Details about : Reconditioned ATE front left caliper for Mercedes W123 - 60mm

Original reconditioned left front brake caliper for Mercedes W123

This reconditioned ATE left front brake caliper for Mercedes W123 with 2 pistons diameter 60mm is an original reconditioned part.

This ATE left front brake caliper for Mercedes W123 is an original part. It has been reconditioned in strict compliance with the original by our partner.

Our reconditioned calipers benefit from the highest quality reconditioning offered on the market. Disassembly, inspection, identification, cleaning and bead-blasting, new inspection, surface treatment, new inspection, engraving, automatic replacement of all components other than the cast body, even the pistons, everything is carried out by our ISO 90001-certified partner.

For Mercedes W123 sedan :

- 200 D (123.120) 09/1979 to 04/1985

- 230 (123.023) from 09/1979 to 01/1981

- 230 E (123.223) from 06/1980 to 11/1985

- 240 D (123.123) from 08/1979 to 11/1985

- 280 (123.030) from 08/1979 to 07/1981

- 280 E (123.033) from 08/1979 to 12/1985

- 300 D (123.130) from 08/1979 to 11/1985

- 300 D Lang (123.132) from 08/1979 to 07/1981

For Mercedes C123 Coupé :

- 230 C (123.043) from 09/1979 to 08/1980

- 230 CE (123.243) from 06/1980 to 08/1985

- 280 C (123.050) from 08/1979 to 03/1980

- 280 CE (123.053) from 08/1979 to 08/1985

- 300 C D (123.150) from 08/1979 to 08/1981

For Mercedes S123 Break :

- 200 T (123.280) from 11/1980 to 01/1986

- 230 TE (123.283) from 06/1980 to 01/1986

- 240 T D (123.183) from 08/1979 to 01/1986

- 250 T (123.086) from 08/1979 to 07/1982

- 280 TE (123.093) from 08/1979 to 01/1986

- 300 T D (123.190) from 08/1979 to 01/1986

ATE mounting only

The list of compatible models is indicative only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Dunlop) and compare the shape and dimensions of your calipers.

Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.