Reconditioned ATE right rear caliper for Mercedes Heckflosse W108 W109 W111 - 42mm

Details about : Reconditioned ATE right rear caliper for Mercedes Heckflosse W108 W109 W111 - 42mm

Original reconditioned right rear brake caliper for Mercedes Heckflosse

This reconditioned ATE right rear brake caliper for Mercedes Heckflosse with 2 pistons diameter 42mm is an original reconditioned part.

This ATE right rear brake caliper for Mercedes Heckflosse is an original part. It has been reconditioned in strict compliance with the original by our partner.
Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Mercedes W108 Heckflosse:
- 250S (108.012) from 09/1965 to 03/1969
- 250 SE (108.014) from 01/1966 to 12/1967
- 280 S (108.016) from 01/1968 to 09/1972
- 280 SE (108.018) from 01/1970 to 09/1972
- 280 SEL (108.019) from 01/1970 to 09/1972
- 300 SEb (108.015) from 07/1965 to 03/1969

For Mercedes W109 Heckflosse :
- 300 SEL (109.016) from 01/1968 to 08/1972
- 300 SEL 3.5 (109.056) from 01/1970 to 07/1972

For Mercedes W111 :
- 250 SE Coupé (111.021) from 08/1965 to 12/1967
- 280 SE Coupé (111.024) from 11/1967 to 05/1971 up to chassis N°003467

ATE mounting only
The list of compatible models is indicative only. Remember to check your braking system to identify the original mounting (Bendix, ATE or Dunlop) and compare the shape and dimensions of your calipers.

Return and refund conditions for returnable parts

Your old part must be returned in the same box as the one you are about to receive. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and send it back to us. This will speed up the processing and reimbursement of your deposit.
Please note the following conditions for returning your deposit:
- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.
- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).
- Bolts, clamps, connection screws and bleed screws must be present in the package.
- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.
- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).

Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

Original reference OEM:

0004204783