Repair kit - STIB - rear wheel cylinder for 2cvs -DOT4- 19mm

This repair kit - STIB - for rear wheel cylinders on 2cvs -DOT4- 19mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 19mm diameter DOT 4 rear wheel cylinder. ...

Qty :

Only 3 in stock

Delivery mode

Collect at store Wambrechies (France) : Free

Home delivery : 39.00€

Sent by MECATECHNIC on: Monday, December 23, 2024

Description Product

Customer review

Your questions

Vehicle compatibility

Description Product

Details about : Repair kit - STIB - rear wheel cylinder for 2cvs -DOT4- 19mm

This repair kit - STIB - for rear wheel cylinders on 2cvs -DOT4- 19mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 19mm diameter DOT 4 rear wheel cylinder.

Technical caracteristics

Assembly side

Straight , Left

Axle

Rear

Diameter (mm)

Matériau

Rubber

Norme de liquide de frein

DOT 4

Quantity required

Customer review

No commentary about the product

Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website

Your questions

Vehicle compatibility

Citroën

Citroën 2CV 4/6 :

Visit the category Wheel cylinder Citroën 2CV 4/6

MECATECHNIC recommend you

Rear wheel cylinder with 8mm spanner fitting for AK350-400 van -DOT4- after 1969 - 19mm - M8x1.25mm - CV40026

Only 1 in stock

18,35 €

ATI

Rear wheel cylinder with 8mm spanner fitting for AK350-400 van -DOT4- after 1969 - 19mm - M8x1.25mm

This DOT4 - 19mm - M8x1.25mm rear wheel cylinder with 8mm spanner fitting for AK350-400 vans is a quality reproduction.

This rear wheel cylinder for 2cv AK vans is faithful to the original.
It is compatible with AK350 and AK400 2cv vans from July 1969 onwards with front drum brakes of 220 mm.

Use an 8 mm spanner to connect it to the brake pipe.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.