18,85 €
ATISINTO Universal Epoxy Putty (60g) is a very fast-setting, two-component, moldable epoxy putty perfect for repairing, filling and bonding most materials. It can be applied to all ferrous and non-ferrous metals, masonry, plumbing materials (P. V. C. ),...
See moreOnly 2 in stock
Only 2 in stock
Delivery mode
Collect at store Wambrechies (France) : Free
Home delivery : 39.00€
Sent today by MECATECHNIC if ordered before 15h00
Description Product
SINTO Universal Epoxy Putty (60g) is a very fast-setting, two-component, moldable epoxy putty perfect for repairing, filling and bonding most materials. It can be applied to all ferrous and non-ferrous metals, masonry, plumbing materials (P.V.C.), glass, frosted ceramics, etc...
Epoxy paste can be sawn, filed, drilled, tapped, using the usual tools and dry sanded to P100 then P220 grit.
Characteristics :
- Color : Aluminum gray
- Adheres and hardens in 5 minutes
- Water, impact and weather-resistant
- Epoxy technology
- Drying time: 30 min at 20°C
- Tensile strength: 56 kg/cm² (1.5 lb/ft²)
Directions for use :
- Cut directly to length.
- Mix until a homogeneous color is obtained (1 to 2 min.).
- Apply firmly to the area to be repaired, after shaping the paste if necessary.
- For fast, efficient kneading, roll the piece of dough between your hands until it forms a 3-4 mm bead, folding the bead back on itself several times.
- Repeat this sequence several times.
- To facilitate mixing in cold weather, reheat the product.
Please observe all safety precautions.
Mark
SINTO
Capacity (g)
Customer review
No commentary about the product
Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website
Your questions