Mastic, glue and assembly

Heavy-duty bonding compound (300 ml). 
Sikaflex-552 AT is based on Sika's hybrid polyurethane technology (STP) and contains no isocyanates.
Recommended for mounting exterior elements requiring strong adhesion.
Recommended for the installation of spoilers, solar panels, etc. and all other objects in contact with bodywork.
Sikaflex-552 AT can be painted with most body enamels (including water-based enamels).
Pretreat with SIKA CLEANER 205.
Color: white.
Cartridge: 300ml.

Sikaflex-552 AT (300 ml) is a flexible, single-component hybrid adhesive for high-performance structural bonding.

It is capable of withstanding high dynamic stresses.

Example: decorative bodywork tabs, sheet metal joints...

This Sikaflex 552 AT joint is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the ISO 9001 quality assurance system and the ISO 14001 environmental management system.

Sikaflex-552 AT is ideal for structural assemblies subject to dynamic stresses.

Good adhesion to all materials normally used in body shops, such as metal primers, primers, metals and enamelled synthetics.

The products :

- Advanced hybrid technology
- Good adhesion to a wide range of substrates without primer
- Abrasion and impact resistant
- Withstands high dynamic stress
- High initial strength
- Fast curing
- Resistant to aging
- Low odor
- Non-corrosive
- Free from isocyanates and silicone solvents

Sikaflex 552 AT is a high-performance structural soft single-component hybrid adhesive.

It is capable of resisting high dynamic loads.

Example: decorative strips on the bodywork, sheet metal panel joints, etc.

This Sikaflex 552 AT sealant is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the quality assurance system ISO 9001 and the environmental management system ISO 14001.

Sikaflex-552 AT allows structural assemblies that are subject to dynamic loads to be joined.

Good adherence to all materials commonly used in bodywork workshops, such as metal primers, primers, metals and enamelled synthetic materials.

Product advantages:

- Advanced hybrid technology
- Good adherence to a wide range of different unprimed supports
- Abrasion and impact resistant
- Resistant to high dynamic loads
- High initial resistance
- Fast hardening
- Resistant to ageing
- Emits little odour
- Not corrosive
- Does not contain isocyanates, silicone solvents or PVC

Colour: black
Contents: 300 ml

LOCTITE 243 normal threadlocker is a blue, medium-strength threadlocking adhesive suitable for non-permanent locking andsealing of threaded assemblies.
Its composition makes it ideal for sealing and securing screws, nuts, bolts and studs which may loosen under the effect of shock or vibration and require regular disassembly (use LOCTITE 271 red threadlocker for parts requiring permanent braking).

Compatible with all metals, including stainless steel, aluminum and plated surfaces, it cures in the absence of air when confined between metal surfaces with little clearance.

Advantages :
- Easy to use
- Efficiently secures bolts and screws
- Suitable for regular disassembly
- Tolerates slight contamination by industrial oils (engine oils, fuels, etc.)

Please observe all safety precautions.

SIKAFLEX 252 from SIKA is a strong bonding putty . In the world of motorhomes, caravans and vans, it is recommended for mounting exterior components requiring strong adhesion: roof extensions, spoilers, solar panels, roof racks, etc...
Preliminary preparation with SIKA CLEANER 205 - 250 ml
Cartridge: 300 ml
Color: white.
Sold individually.

Le silicone autojoint d'étanchéité LOCTITE SI 5940 est un produit qui polymérise sous l'action de l'humidité de l'air pour former un élastomère de silicone de collage, flexible, étanche et résistant aux huiles. Ce mastic est généralement proposé pour des applications d'étanchéité et de collage à usage général, sous la forme de joint avec capacité de prise en jeux ou comme JPP (joint polymérisé sur pièce). Il adhère sur les surfaces propres métalliques, le verre, tous types de bois non gras, les résines silicones, les caoutchoucs silicones réticulés, les céramiques, les fibres naturelles ou synthétiques et la plupart des plastiques et des surfaces peintes .
Ce produit est utilisé typiquement pour des applications ayant des températures de service entre -50°C et +200 °C et pouvant par intermittence atteindre +220°C.

ATTENTION : Ne pas utiliser comme joint d'étanchéité sur culasse !

Avantages :
- Prêt à l'emploi.
- Forme une couche étanche et souple.
- Résiste à des températures de -50°C à +200°C en continu, +220°C en pointe.
- Colle sur la plupart des matériaux tels que le verre, les métaux, les céramiques, les composites et la plupart des plastiques.

Merci de respecter les précautions d'usage.

SIKALASTOMER 831E is a mastic tape specially designed for the installation andsealing of ventilation systems (hoods, chimneys, ventilators, skylights), profiles and rocker panels.
Color: gray.
Dimensions: 25 x 3 mm.
Sales unit: 12-meter roll.

TEROSON RB VII is a multi-purpose putty that provides excellent corrosion protection. Based on solvent-free synthetic rubber, it provides permanent plasticity. Repaintable, it can be used to cover andinsulate the underbodies of motorhomes, caravans and cars.
It can be applied to a wide range of materials (metal, wood, plastics).
Color: white.
Dimensions (lxh): 20x2 mm.
Rolls of 3 m.

Ref Teroson RB VII

This neoprene glue in 500ml cans hasexcellent long-lasting properties.
Particularly suitable for bonding fabrics, upholstery, carpets and floor mats, rubber, felt, foam, cardboard and interior panels, it can also be applied to bare or painted sheet metal.

Directions for use :

- Shake well before use
- Spray the glue onto the two materials to be bonded, at a distance of 10 - 20cm.
- Then exert good pressure on the bonded materials.
- Drying time: depending on the thickness of the layer applied and ambient temperature

Polyester putty reinforced with incorporated fibreglass.

- Forreplugging, sealing, insulating, stopping leaks, etc.

- Excellent adhesion on most substrates: metal, aluminium, polyester, plastic, etc.

- Can befiled, sanded, drilled, sawn, etc.

- Can be painted overby all typesof single-component and multicomponent paints such as epoxy, polyurethane,chlorinated rubber, automotive paint or boat paint, etc.

For:
- Specific structural bonding for aluminium sections
- Fills superficial cracks, repairs damaged sections ofaluminium
- Repairs corroded metal sections

LOCTITE 4850 Instant Adhesive is recommended for the assembly and repair of joints and flexible tubing. The fields of application are numerous: bays, windows, doorsand gates of motor homes, caravans, and converted vans..
Its low viscosity gives it good adherence to porous and absorbent materials andacidic surfaces.

The advantages of this glue:
- Instant, flexible adhesive
- Low viscosity
- Versatility: suitable for bonding a wide range of similar or different materials (metals, rubber, wood, cardboard, ceramics and most plastics)

Other features:
Colour: clear and colourless
Setting time: 3-10 sec.
Operating temperature range: -40 to +80°C
Maximum centre distance: < 0.15 mm
Bottle: 20 g

Product no. LOCTITE 4850.

LOCTITE 401 Strong Adhesive (10g) is a universal instant adhesive. It is perfect for quick and/or urgent repairs .

Its composition enables the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength.

Compatible with metals, plastics, rubber and elastomers, including wood, paper, leather and fabric.

Advantages:
- General usage
- Also suitable for acidic, passivated or galvanised surfaces.
- Suitable for porous substrates such as wood, paper, leather, cork and fabric
- Compliant with standard NSF no. 123011

LOCTITE 401 instant adhesive is ideal for bonding difficult-to-bond materials requiring high tensile and/or shear strength and uniform stress distribution. This powerful , fast-setting adhesive enables efficient bonding of a wide variety of materials, including metals, plastics and elastomers. LOCTITE 401 is also suitable for porous materials such as wood, paper, leather and fabric.
Ideal for all quick repairs and all types of small emergency repairs.

Advantages :
- Universal instant adhesive.
- Very high resistance on low-gap joints.
- Perfect for quick repairs and all types of emergency repairs.
- For bonding a wide range of similar or dissimilar materials (metals, rubber, wood, cardboard, ceramics and most plastics).
- Also suitable for acidic, passivated or galvanized surfaces.
- NSF Category P1 approved for use as a bonding and/or sealing compound in food processing areas.

Technical data:
- Resists temperatures up to 120°C
- Setting time: 3 to 10 seconds
- Viscosity in mPa.s: 100
- Service temperature range: -40°C to 120°C

Please observe safety precautions.

LOCTITE 454 Instant Adhesive is a universal gel adhesive designed for bonding difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. This product provides fast bonding for a wide range of materials, including metals, plastics and elastomers. The gel-like consistency allows application from below or on vertical surfaces. Also suitable for bonding porous materials such as wood, paper, leather and fabric. Ideal for all quick-repair operations.

ATTENTION: Bonds to skin and eyes in seconds. Keep out of reach of children. Avoid breathing vapors. Wear protective gloves and eye protection!

Advantages :
- Universal instant gel adhesive.
- Recommended for all quick-repair jobs.
- Ideal for upside-down or vertical applications.
- Bonding of a wide range of similar or dissimilar materials in wood, metals, ceramics and most plastics.
- Low penetration, ideal for bonding porous materials.
- Non-sag, non-drip.

Please observe safety precautions.

Glue recommended to secure the seams and formed sections of bays, windows, doors and small doors.
- Instant glue: 5 to 60 seconds maximum.
- Base: ethyl cyanoacrylate.
5 gram tube.

TEROSON MS 9120 white mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.

TEROSON MS 9120 gray mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.

TEROSON MS 9120 black mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.