Carburetion tool

Content includes: Gas tester instrument including
Calibrates in air, no moving parts to wear out
No filters to change
Accurate to 0.5% C.O measurement at 15-25?C
Accurate to 0.5% C.O measurement at 15-25?C
Instructions included

For gas analyser - product no. UO09006 or equivalent.

These nozzle gauges, also known as calibrators , are indispensable for determining the size and cleaning of carburetor nozzles.

Mainly designed for pre-2005 motorcycle carburetors, they can also be used for cars, lawnmowers, etc.

Sizes Ø : 0,45 - 0,50 - 0,55 - 0,60 - 0,65 - 0,70 - 0,75 - 0,80 - 0,85 - 0,90 - 0,95 - 1,00 - 1,05 - 1,10 - 1,15 - 1,20 - 1,25 - 1,30 - 1,40 - 1,50 mm

This spanner is used to tighten and loosen the plastic sealing ring on the fuel tank sensor.

Designed for:

- VAUXHALL: Antara > 2007, Astra-J > 2010, Insignia > 2009, SIGNUM 2003 - 2008, Vectra-C 2003 - 2008
- Mercedes-Benz: W204, W207, W212 E and C-Class
- BMW: F01/F02/F10/F12, 7, 6 and 5 Series
- Volvo: T4/T5 engines (>2010) and S40, V40

Uses: for BMW F01 / F02 x 3 / F25
Square drive: 1/2

Ideal for removing the fuel gauge on most Mercedes, BMW, Audi, Volkswagen & Citroën models.

Adjustable diameter: 80 to 199 mm
Square drive: 1/2

This set of micro drills for carburettor jets is ideal to test the different jet diameters, 0.4 to 3.2 mm.

What sizes are the drill bits?

0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.1 / 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / 2.8 / 3.0 / 3.2 mm

This set is delivered with a manual chuck

Carburetor nozzle cleaning tools :
- For cleaning nozzles on carburetors and welding equipment .
- Removes even the smallest impurities from carburettors.
- Provides thorough, effective cleaning that optimizes engine performance and efficiency.
Composition:
- 5 stainless steel nylon brushes, Ø 2 - 3 - 4 - 5 - 7 mm, brush length 30 mm, total length 115 mm.- 10 stainless steel cleaning needles, Ø 0.7 - 0.9 - 1.1 - 1.3 - 1.4 mm, length 115 mm.- 1 L-type wrench, hexagon socket, 4 mm.- 12 round files, carbon steel, Ø 0.4 - 0.5 - 0.6 - 0.7 - 0.8 - 0.9 - 1 - 1.1 - 1.2 - 1.3 - 1.4 - 1.6 mm, length 90 mm.- 1 flat file, length 90 mm.

- to check nozzles for damage
- Ø 0,45-0,50-0,55-0,60-0,65-0,70-0,75-0,80-0,85-0,90
0,95-1,00-1,05-1,10-1,15-1,20-1,25-1,30-1,40-1,50 mm

Ideal to check mechanical petrol pumps, fuel ducts, etc. It will detect leaks at the throttle valve, the intake manifold and the pressurised pipe, etc.

Pressure manometer delivered with suspension hook and rubber protection, Ø89 mm.

Measuring ranges:

Pressurised: 0 - 28 in HG (0 - 70 cm HG)
Pressure :0 - 0.7 kg/cm² (0 - 10 psig)

Supplied with hose and adapters.

For BMW and Mini Cooper models (1988-2011).Required for access to the fuel filter
Engines: BMW: E31 | E34 | E36 | E38 | E39 | E46 | E53 | E60 | E63 | E64 | E65 | E83 | E85 | E90 Mini engines: R50 | R52 | R53 | R55| R56 | R57.
OEM Ref 16 1 020.
Recommended tightening torque is 35Nm.
Recommended tightening torque is 35Nm.
1/2"D

This spanner is used to tighten and loosen the plastic sealing ring on the fuel tank sensor.

The tool-s perfect fit prevents damage to the circlip.

Suitable for models:

- Alfa Romeo GT, 147, 156, 159, 166
- Fiat Grande Punto, Idea, Linea, Multipla, Panda, Nuova Bravo, Panda 4x4, Punto, Sedici, Doblo, Croma, Stilo, Ducato, Soblo Cargo, Idea Van, Grande Punto Van, Multipla Van, Panda Van, Scudo
- Lancia Y, Ypsilon, Musa Thesis
- Ferrari 360 Spider, 430 Coupe, 430 Scuderia, 430 Scuderia Spider, 430 Scuderia Spider 16M, 430 Spider, 575 Superamerica, 757 Maranello, 599 GTB Fiorano, 612 Scaglietti, Enzo
- Maserati 4200 Coupe, 4200 Gransport, 4200 Spyder, GranTurismo and Quattroporte

Equivalent to OEM Ref 11 8 740.
Suitable for use on 1 Series E81 | 82 | 87 | 88, 3 Series E90 | 91 | 92 | 93 & 5 Series E60 | 61 | X3 E83 X1.
Selected steel.
Essential tool.

This tool is used to remove without damage the locking ring that holds the fuel pump that is located in the tank.

It is compatible for Acura RDX (from 2019), Honda Accord, CRV (from 2017), Insight (from 2019).

Designed for the original 161mm diameter locking ring.

It is used with a 21mm wrench or a 1/2" square ratchet.

Ideal for removing and installing fuel tank lock rings.

Application: Peugeot / Citroen

Square drive: 1/2" or 21 mm wrench / socket