Manual tool

- sockets in Pro Torque finish
- 2 fine 72 tooth ratchets 1/4" + 3/8"
- short sockets, 1/4" drive:
5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2"
- deep sockets, 1/4" drive: 1/4", 5/16", 3/8", 7/16", 1/2"
- 1 bit adaptor 1/4"
- 1spinner handle 1/4"
- 1 universal joint 1/4"
- 1 extension bar with external hexagon 1/4"
- 1sliding t-handle with adaptor 1/4"
- short sockets, 3/8" drive:
1/2", 9/16", 19/32", 5/8", 11/16", 3/4", 25/32",
13/16", 7/8", 15/16", 1"
- deep sockets, 3/8" drive:: 9/16", 5/8",11/16", 3/4"
- 1 bit adaptor 3/8"
- 1 universal joint 3/8"
- 1extension bar 3/8"
- 3 spark plug sockets: 5/8",3/4",13/16"
- 29 pcbit assortment in slot, cross slot, PZ, Internal Hexagon, T Star
- 9 pcCombination Spanner Set:
1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"
- internal hexagon keys: 1/16", 5/64", 3/32",
1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
- 1 adaptor 1/4" to 3/8"

This TOOLATELIER 1/2" square reversible torque wrench with automatic release has a torque range from 40 to 220 Nm. For greater precision, the torque setting has a locking device.

Why use a torque wrench?

A torque wrench is an essential part of any car mechanic's tool kit. It's indispensable for carrying out the torque settings recommended by the manufacturer. Too often neglected, tightening torque must be carried out methodically to avoid any safety problems.

Why choose this reference?

The TOOLATELIER 1/2" torque wrench is accurate to within - 3%. It covers a measurement range from 40 to 220 Nm, widely used in the automotive industry for tightening wheels, ball joints, hubs, shock absorbers, etc.

Intensive use

Although loosening is possible, a torque wrench should not be used on seized nuts. Excessive tightening can damage the wrench.

- tungsten steel
- imperial sizes
- 20 taps for thread and
20 dies for external thread (one each size)
fine thread
1/4" NF28 - 5/16" NF24 - 3/8" NF24 - 7/16" NF20
1/2" NF20 - 9/16" NF18 - 5/8" NF18 - 3/4" NF16
7/8" NF14 - 1" NF14
coarse thread:
1/4" NC20 - 5/16" NC18 - 3/8" NC16 - 7/16" NC14
1/2" NC13 -9/16" NC12 - 5/8" NC11 - 3/4" NC10
7/8" NC9 - 1" NC8
- 1 adjustabletap wrench
- 1 T-type tap wrench
- 1 die holder
- 1 adaptor fordie holder
- 1 plain slotted screwdriver 6 mm

This TOOLATELIER reversible torque wrench in 1/4" square with automatic release has a torque range from 5 to 25 Nm. For greater precision, the torque setting has a locking device.

Why use a torque wrench?

This precision tool is essential if you want to carry out work to the highest standards. Quite often, when dismantling a part on your motorcycle or car, there's a torque setting to be respected. These measures are essential to avoid any safety-related problems. These measures can be found in the vehicle's technical review.

Why choose this reference?

This TOOLATELIER dynamo wrench will enable you to tighten to within 3% of the value selected on the vernier scale. The measurement range from 5 to 25 Nm is ideal for motorcycles, cycles and cars.

Intensive use

Although loosening is possible, a torque wrench should not be used on seized nuts. Excessive tightening can damage the wrench.

These TOOLATELIER pliers can be used to sand and/or perforate mild steel sheets up to 1 mm thick for perfect assembly of drawings.

The principle is simple: simply rotate the pivoting jaws with 5 mm perforator to produce a spot weld.

It is 285 mm long and 22 mm wide.

It also has a 13 mm deep jaw for all types of sheet metal work.

These TOOLATELIER pliers make it easy to remove or install self-tightening spring clamps, whatever the accessibility.
Once "clamped" on the clamp, the pliers holds it open thanks to locking notches, making it easy to handle the clamp and hose with both hands.

Which clamps does it fit?

The clamp is suitable for self-tightening clamps up to 50 mm in diameter.
It can be operated with one hand, making work easier. The cable length is 630 mm.

This TOOLATELIER reversible torque wrench in 3/8" (10 mm) square with automatic release has a torque range from 20 to 120 Nm. For greater precision, the torque setting has a locking device.

What is a torque wrench used for?

Precise screw and nut tightening torque is essential for the safety of you and your family. In this kind of work, no approximation is allowed. This TOOLATELIER torque wrench provides precise torque control and maximum working comfort!

Why choose the TOOLATELIER torque wrench?

Thanks to its ergonomic handle, easy adjustment and accuracy of - 3%, this wrench will meet the expectations of the most demanding enthusiasts. With a torque range of 20 to 120 Nm, it's ideal for automotive and motorcycle applications, such as tightening wheels, spark plugs, glow plugs, ball joints, shock absorbers, etc.

Intensive use

Although loosening is possible, a torque wrench should not be used on seized nuts. Excessive force can damage the wrench.

These insert pliers are ideal for working in hard-to-reach areas.

For M3, M4, M5, M6, M8 and M10 inserts.

Suitable for aluminium, steel and stainless steel inserts.

The maximum travel is 9 mm and the length is 330 mm.

The weight is 1100 g.

- hardened, chrome plated
- polished jaws
- 1/4"-5/16"-3/8"
- 7/16 -1/2"-9/16"-5/8"
- 11/16"-3/4"-13/16"
- 7/8"-15/16"
- in tetron wallet

Sizes:

4"-40UNC - 6"-32UNC - 8"-32UNC - 10"-24UNC - 10"-32UNF - 12"-24UNC - 1/4"-20UNC - 1/4"-28UNF - 1/4"-24UNS - 1/4"-32UNS - 5/16"-18UNC - 5/16"-24UNF - 3/8"-16UNC - 3/8"-24UNF - 7/16"-14UNC - 7/16"-20UNF - 1/2"-13UNC - 1/2"-20UNF - 9/16"-12UNC - 9/16"-18UNF - 5/8"-11UNC - 5/8"-18UNF - 3/4"-10UNC - 3/4"-16UNF

M6 x 1,0 - M8 x 1.25 - M10 x 1.5 - M10 x 1.0 - M11 x 1.5 - M12 x 1.25 - M12 x 1.75 - M14 x 1.25 - M18 x 1.5 - 1/8"-27NP - 1/4"-18NPT

This XZN socket set from TOOLATELIER is often used in the automotive industry.

What are XZN sockets used for?

This type of impression is used in the automotive industry for braking and steering systems, as well as for steering (cardan shafts, etc.).

What sizes are available?

This box of 7 sockets comes with XZN male sockets in sizes M5 - M6 - M8 - M10 - M12 - M14 and M16. The square is 1/2".

This TOOLATELIER torque wrench has a torque range from 30 to 210 Nm. Ideal for automotive applications.

It is graduated in Newton/Meter with a 1/2" square.

Occasional use

Although loosening is possible, a torque wrench should not be used on seized nuts. Excessive forcing can damage the wrench.

These external pin sockets are used for gently loosening and tightening locknuts according to DIN 981 on drive shafts, clamping or extraction sockets, etc.

Suitable for lug nut sizes:

- 1/2" (12.5 cm) drive: KM4 - KM5 - KM6 - KM7 - KM8
- 3/4" (20 mm) drive: KM9 - KM10 - KM11 - KM12

These 3 TOOLATELIER clamps are designed to stop the flow of water, petrol and brake fluid hoses.

Their special jaws are designed not to damage hoses. Lightweight and robust, they can be used in the most confined areas of the engine compartment.
They feature an adjustable stop with snap-in function for ease of use.

These clamps can withstand temperatures up to 160°C.

Sizes :

155 mm long for hose diameters 3-15 mm
185 mm long for hose diameters 6 - 20 mm
255 mm long for hose diameters 8 - 45 mm

It is used on "modern" engines, when the angular setting is recommended after the classic setting with a torque wrench. The angular setting is specified, from now on, in the technical handbooksof the related engines.

Measuring range: from 0 to 360°

Contents:
-1 torque wrench
-1 referral rod

These 19 sockets from TOOLATELIER are perfect for automotive, motorcycle and industrial applications. They fit wrenches such as ratchets, torque wrenches...

This kit is organized in a functional way for greater comfort during your mechanical work.

What sizes are included?

The 12-socket sizes are 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 mm with 1/2" drive.

They are made of chrome vanadium.

In particular, this socket is used for removing and fitting driveshafts on Citroen models.

44 mm hex socket made from chrome vanadium
For large square drive: 3/4" (19 mm)

- chrome plated
- straight and bent tips
- for internal and external circlips
- non-slip cushion grip handles

Packed in a solid vinyl wallet

This set of 8 to 19 mm TOOLATELIER ratcheting combination wrenches enables you to loosen and tighten nuts and screws with ease, without having to reposition the wrench during the task in hand.

What are these wrenches used for?

They are ideal for tight spaces in automotive, motorcycle and industrial applications. Their satin finish and ergonomic design make them easy to grip.
The ratchet and 12-sided impression are ideal for screws and nuts with 6- and 12-sided heads.

What sizes are available?

This wrench set is available in the most common sizes: 8, 9, 10, 11, 13, 17 and 19 mm. Other sizes are available on our website.

Why choose TOOLATELIER wrenches?

These ratcheting wrenches from TOOLATELIER have been designed to meet the needs of the professional, while at the same time appealing to car and motorcycle restoration enthusiasts.

Thanks to their ease of use and changeable direction of rotation, they'll help you with all your projects.

They are made from chrome vanadium (Cr-V) steel for strength and durability.

This adapter will enable you to use a ratchet wrench as a torque wrench, with a torque measurement range from 40 to 200Nm and an accuracy of /- 2%.

It can also be used for tightening or loosening.

Digital dial with 1/2" square