Lifting - Holding

This new-generation TOOLATELIER small mobile bridge enables you to tilt a vehicle from front to rear. Very practical for work around the vehicle, such as brakes, front-rear axles, bumpers, etc.
Some technical information:
Flat deck exterior dimensions: 156 x 120 x 15cm3 adjustable width levels: 77.5 - 113 - 153cmMin. height 16 cmMax. height 58cmSkid dimensions: 79 x 14 x 8.5cmHorizontal lifting capacity: 1500kgTilt function lifting capacity: 1000kg
Why choose the TOOLATELIER tilting car lift?
The TOOLATELIER tilting and horizontal car lift will make life easier for you in your various maintenance and repair jobs. CE-approved, it features an anti-tilt locking system for added safety, and wheels for easy movement. The bridge can be stored vertically to reduce clutter and enable you to position it against the wall of your garage or workshop. The mobile bridge is also adjustable in 3 sizes, with a minimum lift of 16 cm, this TOOLATELIER bridge will enable you to lift your vehicle up to 58 cm from the ground (lower body). It operates with an integrated crank system, and you can also use a drill (no impact wrench). Weighing in at 68 kg, the bridge is capable of supporting up to 1,500 kg, and will support you in all your projects.
Repairing or modifying your vehicle has never been so simple and practical!

TOOLATELIER engine support beam , 500 kg capacity, for mounting and dismounting engines, gearboxes, etc.

Practical, width-adjustable spacing from 750 to 1450 mm to suit a wide range of vehicles (rubber protection for fenders).

Supplied with two 90 cm long chains.

These 2 TOOLATELIER handling carts on wheels are an invaluable aid when you need to move your car in a confined space, to start restoring your beauty or for storage, even for long periods, without the risk of deforming your tires.

The big advantage over fixed chocks is that you can move your vehicle effortlessly around your garage/workshop or showroom!

We do not recommend using these carts on painted floors (possible marks).
Maximum load capacity per cart is 450 kg ( ).

Thanks to their rounded shape, Fiamma's WHEEL SAVER shims helpprevent "ovalization" of tires on vehicles parked for long periods (motorhomes, caravans). Ideal when restoring or winterizing your vehicle. With the set of 4 chocks, you protect all 4 wheels of your vehicle.

Suitable for wheels up to 70 cm in diameter.
Chocks can be fixed directly to the garage floor for greater stability, or 2 chocks can be installed in parallel (double axle).
Made of resistant ABS plastic, they are recommended for motorhomes and caravans.) Can be fixed to the floor with nails or screws (not supplied).
Dimensions (L x W x H max.): 46 x 21 x 6 cm.
Weight: 4 x 0.6 Kg.
Sold in sets of 4.

This engine mount has a maximum load capacity of 560 kg. It can be rotated 360° and locked in 8 positions.

It has 4 reception points with adjustable angle and distance. The castors have ball bearings.

Weight: 28 kg

- for assembling and disassembling of engines,
gearboxes, rear axle ect.
- height approx. 140 - 195 cm
- 4 ball bearing caster wheels
- compact construction, lightweight
- long lifting range
- fast lifting due to hydraulic foot pedal

The robust design of this jack makes it suitable for use in a garage or a workshop to lift all vehicles with a low ground clearance.

It is fitted with a rubber pad for better stability, 2 pivoting wheels for ideal positioning, and a double piston approach pedal for fast lifting.

Its lifting height is 75 to 495 mm and its size is 77.4 x 40 x 21 cm.
It weighs 32 kg.

This set of 2 TOOLATELIER brand stanchions has a maximum load capacity of 3T. This type of equipment is indispensable for all work on your car.

These stanchions feature a rack-and-pinion locking system, as well as a safety pin to prevent accidental removal.

Lifting height : 430 mm.
Min. height Height : 277 mm
Max. height 435 mm
Maximum weight : 3 tons per stanchion
Weight : 5.3 kg

Set of 4 parking chocks to prevent "ovalization" of tires during wintering. 
Leveling your vehicle allows on-board equipment to function properly. The set of 4 leveling chocks allows all vehicle wheels to be fitted simultaneously.

Made of resistant plastic.
Color: black.
Dimensions: 29 x 24 cm. 
Thicknesses: 1 cm in the center, 3 cm on the sides.

Sold by 4 chocks (2 pairs)

2x Ref Milenco M4701

CAMPER's Flat Jack inflatable chock relieves stress on chassis and tires when parking on uneven terrain. It fits tires up to 255 cm wide and vehicles with a GVW up to 7.5 t.
Inflatable via a valve adaptable to a standard compressor (not supplied), it's easy to use and takes up no space (66x1x43 cm folded) when stowed in the motorhome. Made from a double-walled air cushion, it is particularly resistant.
One cushion can lift the vehicle up to a height of 6 cm.A maximum ofone additional cushion can besuperimposed, raising the vehicle up to 12 cm.
Composition: Polyurethane (PU) / Nylon.
Operating pressure: 0.6 to 1.0 bar max.
Weight: 0.7 kg.
Sold individually.

This heavy-duty pit jack is used for assembly and disassembly of engines, gearboxes, rear axles, etc. Maximum load 500 kg.

Technical data

- Head plate adjustable by 60 mm on the side and from -10° to 35° in inclination, therefore particularly suitable for mounting automatic gearboxes
- Sizes: H 890 x W 1040 mm
- Height approx. 880 to 1770 mm
- 4 ball-bearing castors
- Quick lifting by hydraulic foot pedal
- Weight: 80 kg

Lifting capacity 1200 kg
Completely mobile
Quick and easy to use
Maximum vehicle weight 2500 kg
Ideal for use in any automotive workshop

Spare housing for the TA00205 tilting car lift.

Sold individually.

You have to change both casings per axle.

It can also be used as a footboard, facilitating access to your motorhome.
It disassembles easily to take up a minimum of space in your vehicle. With the addition of 2 side rails, you can transform the level chock into an access ramp to your cargo bay.

Heavy-duty plastic running surface.
Load capacity 400 kg
Length (max.): 145 cm.
Width: 25 cm.
Weight: 6.85 kg.

This wedge is used to securely park cars, trucks, caravans and trailers.

For ease of use, it is equipped with a lifting handle.

Length: 250 mm
Width: 160 mm
Height: 190 mm
Gross weight: 2806 g

For tires between 255 and 275 cm wide and vehicles with a GVW up to 7.5 t.
CAMPER PLUS inflatable Flat Jack chock protects your tires from damage caused by long parking periods in recreational vehicles (vans, motorhomes, caravans). It also protects chassis when parked on uneven ground. It evens out the height of your vehicle, providing comfort during your stay.
Inflatable via a valve adaptable to a standard compressor (not supplied), it's easy to use and takes up no space (66x1x43 cm folded) in the motorhome when stowed.
The double-walled air cushion is particularly resistant.
One cushion can lift the vehicle up to a height of 6 cm. It can be stacked with up to one additional cushion, raising the vehicle up to 12 cm.
Composition: Polyurethane (PU) / Nylon.
Operating pressure: 0.6 to 1.2 bar max.
Weight: 0.96 kg.
Sold individually.

The inflatable AIR LIFT chock or cushion quickly and easily levels any vehicle up to 11 tonnes (at 6 bar of pressure)!
It ensures excellent protection for your tyres against damage related to the prolonged immobility of recreational vehicles (van, campervans, caravans) and heavy vehicles (4x4, SUVs) and construction machines. It also protects the chassis in case of parking on irregular terrain. It levels the height of the vehicle for greater comfort (campervans, caravans).
It is inflatable thanks to a valve that adapts to a classic compressor (not provided). It is easy to use and takes up very little vehicle storage space (48 x 1 x 43 cm once folded).
The double walls of this cushion make it particularly rugged.
A cushion can raise the vehicle to a height of 20 cm.
Inflatable via a hand or foot pump or with a 12 V mini-compressor.
Operating pressure: 10 bar.
Max. pressure: 15 bar.
Max. levelling: 20 cm.
Operating temperature: -20 °C to +60 °C.
Payload: 11 t at 6 bar.
Deflated dimensions (LxWxH): 48 x 43 x 2 cm.
Weight: 3.6 kg.
Sold individually.

Ref EMUK: 200010.

WHEEL SAVER Fiamma? wheel chocks To avoid flat tires!

Thanks to their rounded shape, WHEEL SAVER Fiamma shims helpprevent "ovalization" of tires on vehicles parked for long periods (motorhomes, caravans, vans, cars undergoing restoration, ....). Ideal when restoring orwinterizing your vehicle. 

Suitable for wheels up to 70 cm in diameter.
Chocks can be fixed directly to the garage floor for greater stability, or 2 chocks can be fitted in parallel (if double axle).
Made of resistant ABS plastic, they are recommended for wintering motorhomes and caravans. Can be fixed to the ground with nails or screws (not supplied).
Dimensions (L x W x H max.): 46 x 21 x 6 cm.
Weight: 2 x 0.6 Kg.
Sold in pairs.

Ref Fiamma 97901-013.

Foldable metal wheel chocks sold in pairs. An indispensable tool when using lifting ramps, stanchions or rolling jacks. These folding wheel chocks take up very little storage space.

Length: 13 cm
Width: 9.5 cm
Folded height: 2.5 cm
Unfolded height: 7.5 cm

STACKA Milenco parking chocks help prevent the "ovalization" of motorhome and trailer tires during the winter, as well as for classic and vintage cars that are regularly immobilized for long periods. Over time, this reduces the risk of blowouts or slow punctures. In the end, the tire is isolated from the ground and its lifespan extended, if not prematurely worn out. To be fitted under the 2 front tires or the 2 rear tires.

Leveling your vehicle allows on-board equipment to function properly.

Made of resistant plastic.
Color: black.
Dimensions: 29 x 24 cm.
Thickness: 1 cm in the center, 3 cm on the sides.
Sold in pairs.

Ref Milenco M4701