Striking tool

Size: 8 mm
Letter type: A to Z
Material: steel

Size: 8 mm
Digits: 0 to 9 (6 and 9 being the same number to be struck)
Material: steel

Needle screw for Weber carburetor

Size 200

For Weber carburetors listed below:
DGV
DGAV
DGEV
DGMS
DGES
DGAS
DFTH

Original new part Weber

Needle screw for Weber carburetor

Size 150

For Weber carburetors listed below:
DGV
DGAV
DGEV
DGMS
DGES
DGAS
DFTH

Original new part Weber

This flat chisel is made of hardened steel. It has a blade width of 25 mm and a shaft size of 13 x 23 mm.

The weight is 490 g.

After a hard week's work, who hasn't dreamed of a well-deserved break?
This hammer features a standard striking weight for all types of nails. However, its special aperitif end is equipped with a technical bottle opener to accommodate a wide range of capsules.
It's theESSENTIAL tool in your toolbox!
To give as a gift or for yourself!

Float needle valve for Weber carburettors
DARA
DAT, DATR, DATRA
DCD, DCOF
DFC, DFD, DFE
DFM
DGF, DGS
DHSA, DHTA
DIC, DICA
DMTC, DMTL, DMTR, DMTRA
DMSA
DRTC
IBA, IBSA, IBSH , IBP, ICA, ICB, ICF, ICE, ICEV
ICF, ICH, ICP, ICR, ICT
IDF
OF

Sold individually

WEBER size 225 needle with screw compatible with the following carburettors:
- DCOE
- COD/SP
- DCN
- DCNF

This hammer with copper heads is ideal for loosening wheel rims or any other soft metal parts.

It is equipped with a fibreglass handle with a rubber grip.

The weight of its head is 454 g.

Punchable capital letters A to Z, size 6 mm. They are used to stamp steel and iron.

The engraving on the surface has been lowered to reduce the depth of the marking.

They comply with the DIN-1451 standard.

Comes in a storage box.

This square-headed sledgehammer is used in the automotive, motorcycle, industrial and construction sectors.

It features a 1000g head weight for greater work efficiency.
Its design provides a firm hold on the hammer while ensuring even striking.

Head length: 95 mm
Length: 265 mm
Handle length: 220 mm
Head weight: 1000g
Gross weight: 1100g
DIN standard: 6475

Sizes: Female M20 x 1.5 => Male M18 x 1.5

Adaptor for product TB00516

WEBER size 250 needle compatible with the following carburettors:
- DCOE
- COD/SP
- DCN
- DCNF

Needle screws for Weber carburetors
Size 150

For Weber carburetors listed below:
DARA
DAT, DATR, DATRA
DCD, DCOF
DFC, DFD, DFE
DFM
DGF, DGS
DHSA, DHTA
DIC, DICA
DMTC, DMTL, DMTR, DMTRA
DMSA
DRTC
HPMX
IBA, IBSA, IBSH , IBP, ICA, ICB, ICF, ICE, ICEV
ICF, ICH, ICP, ICR, ICT
IDF
OF

Original Weber part

WEBER size 200 needle compatible with the following carburettors:
- DCOE
- COD/SP
- DCN
- DCNF

WEBER size 175 needle compatible with the following carburettors:
- DCOE
- COD/SP
- DCN
- DCNF

This bounceproof malletis made of polyurethane fibreglass and is completely covered with rubber.

The principle is simple; it doesn-t bounce because of the steel balls in the head of the hammer, which makes it hit harder.

Ideal for undoing jammed parts.

The length of the handle is 330 mm and the striking head has a diameter of 50 mm.

- 5 interchangeable heads: copper/aluminium/plastic/nylon/steel
- Ø of the heads: 35 mm
- Length: 305 mm
- Handle: wood

Float needle valve for Weber carburettors
DARA
DAT, DATR, DATRA
DCD, DCOF
DFC, DFD, DFE
DFM
DGF, DGS
DHSA, DHTA
DIC, DICA
DMTC, DMTL, DMTR, DMTRA
DMSA
DRTC
IBA, IBSA, IBSH , IBP, ICA, ICB, ICF, ICE, ICEV
ICF, ICH, ICP, ICR, ICT
IDF
OF

Sold individually

This bounceproof mallet is made of polyurethane fibreglass and is completely covered with rubber.

The principle is simple; it doesn-t bounce because of the steel balls in the head of the hammer, which makes it hit harder.

Ideal for freeing up jammed parts.

The length of the handle is 380 mm and the striking head has a diameter of 60 mm.