Antirust

Rustol CIP (Corrosion InhibitorPrimer) anti-rust treatment

- Apply directly onto new and very rusty, oxidised brackets. The rust will then be impregnated by the product which will then stabilise it/stop it spreading further.

- Can be painted over orcoated with all types of single-component and multicomponent paints such as epoxy, polyurethane, chlorinated rubber, automotive paint or boat paint, etc.

- Ideal for challenging atmospheric conditions (seaside, corrosivefumes, etc.).

- Withstands high temperatures (175°C).

Rust converter to stop oxidation on metal parts such as steel, zinc or aluminium sheet metal.

At the same time, this rust converter eliminates layers of deep rust while protecting the treated surface from oxidations. The result obtained is a grey surface, completely stripped, ready to be painted without having to sand the surface!

Packaging: 1 Litre

This Frameto treatment completely transforms rust, stops its development, forming with it, a highly-resistant, long-lasting black protective layer. Metal shutters, radiators, water pipes, cars, motorbikes, boats, grills, garden furniture, tools, etc.

Instructions:

Clean with a hard brush and then a cloth to remove all loose dust and paint, dirt and grease. Shake well, then pour the product into a non-metallic recipient. Apply with the brush, dab and smooth out.

Restrictions:
Use the product at a temperature of between 10°C and 40°C. For maximum protection, apply 2 coats to the surface. Before applying metallised, vinyl or latex paints, a cellulose coat is essential. Do not pour used product back into the bottle. After use, clean your hands and brushes with soapy water. Keep out of direct sunlight. Heat resistant up to 130 °C. Biodegradable. Does not contain lead. Not recommended for surfaces which undergo extended submersion. Keep away from children. For metallised, vinyl and latex paints, a coating is essential.

Rust converter to stop oxidation on metal parts such as steel, zinc or aluminium sheet metal.

At the same time, this rust converter eliminates layers of deep rust while protecting the treated surface from oxidations. The result obtained is a grey surface, completely stripped, ready to be painted without having to sand the surface!

Packaging: 250 ml

RUBSON Frameto Stop-Rouille in 1 Litre format is an immediate anti-rust treatment in the form of a black liquid to be applied to all indoor and outdoor metal surfaces.
Rid mechanical parts and car bodywork (radiators, water pipes, sheet metal rims, body panels, etc.), as well as tools, garden furniture, shutters, gates, steel grilles, etc., of all traces of corrosion.
Fast-acting and lead-free, the product is applied directly to rust with a brush. It forms an ultra-resistant, long-lasting black protective layer.
After 24 hours drying time, the treated surface can be painted with a special metal paint.

Economical, only 75ml of product are needed to treat a 1m² surface of ferrous metal.

This bottle will enable you to transform rust in depth and stop its development on a total surface area of around 13m² (1 coat).

WARNING: Not suitable for parts subject to high temperatures (manifolds or exhaust lines, brake calipers etc...) nor for prolonged immersion under water!

Instructions for use :
- Clean the surface with a wire brush or by scraping to remove rust and paint scales.
- Clean and degrease surfaces with a solvent (degreaser or F-gasoline).
- Shake bottle vigorously for 2 minutes to homogenize product.
- Pour the required amount into a plastic container.
- Apply with a brush over the rusted area, dabbing and smoothing evenly.
- Never pour unused product back into the bottle.
- After use, clean your hands and brush(es) with soapy water.
- Allow to dry for 24 hours before painting.

Information :
- Once dry, product renders black (does not necessarily require painting).
- Use at temperatures between 10°C and 40°C.
- For maximum protection, treat the surface in 2 coats.
- Before applying metallic, vinyl or latex paints, a cellulose coating is essential.
- Keep frost-free.
- Heat resistance 130°C maximum.
- Lead-free.

Please observe safety precautions.

- Colourless rust inhibitor with great wetting ability. Expels air and humidity from the substrate.
- Can be applied directly onto the rust.
- Forms a protective, isolating and flexible film.
- Bonding film for all types of substrate.
- Easy to use

From the brand Autosol, this product removes traces of rust from the surface of chrome and stainless steel.
It contains an active agent that enables it to make small spots of rust disappear. It leaves behind a protective layer to prevent new contamination.
Contains no toxic substances.

Packaging: 250 ml canister