Lifting and motor support

TOOLATELIER engine support beam , 500 kg capacity, for mounting and dismounting engines, gearboxes, etc.

Practical, width-adjustable spacing from 750 to 1450 mm to suit a wide range of vehicles (rubber protection for fenders).

Supplied with two 90 cm long chains.

This engine mount has a maximum load capacity of 560 kg. It can be rotated 360° and locked in 8 positions.

It has 4 reception points with adjustable angle and distance. The castors have ball bearings.

Weight: 28 kg

- for assembling and disassembling of engines,
gearboxes, rear axle ect.
- height approx. 140 - 195 cm
- 4 ball bearing caster wheels
- compact construction, lightweight
- long lifting range
- fast lifting due to hydraulic foot pedal

This heavy-duty pit jack is used for assembly and disassembly of engines, gearboxes, rear axles, etc. Maximum load 500 kg.

Technical data

- Head plate adjustable by 60 mm on the side and from -10° to 35° in inclination, therefore particularly suitable for mounting automatic gearboxes
- Sizes: H 890 x W 1040 mm
- Height approx. 880 to 1770 mm
- 4 ball-bearing castors
- Quick lifting by hydraulic foot pedal
- Weight: 80 kg

Hand-operated chain hoist, light and ideal for confined spaces.

Chain: tempered steel
Wheels, pinions and shafts: heat-treated
Load brake: mechanical

This steel workshop tool is specifically designed VW Type 1, Type 4, CT or WBX engines, it can easily carry an engine on its own thanks to its 4 solid directional wheels. Ideal when removing/refitting an engine with its U-shaped opening designed for the jack.
Dimensions: 290 x 320 x 165 mm

For all VW flat 4-cylinder engines.

- for balancing engines when lifting with an engine crane
- allows a precise alignment when installing the engine
on gearbox
- capacity: 350 kg
- dimensions: H230 x W 510 mm
- adjustment: -+ 210 mm
- 160 mm crank
- incl. 2 chains, 500 mm length

- crane not included

This 600kg capacity CLAS pit jack will be your ideal companion for supporting or removing heavy items from the body, such as a gearbox.
The pedal is used to raise the jack.To lower it, turn the circular handle anticlockwise.
Specifications
Maximum lifting capacity: 600kgMinimum height: 110cmMaximum height: 190cmWarranty: 2 years

This CLAS load balancer with a lifting capacity of 680kg will enable you, when mounted on a crane, to balance the loaded mass when it is raised or lowered.
Specifications
Lifting capacity: 680kgLength: 400mmUsable stroke: 350mmWorm diameter: 15.80mmWarranty: 2 years

This CLAS folding and lowering crane, with a capacity of 1 tonne, will enable you to lift heavy items such as engines quickly and easily, even on lowered vehicles.
Oncefolded, the crane takes up very little space in your workshop, optimizing your workspace.
Features
- Fully foldable crane- Nylon wheels
Features
Lifting capacity: 1 tonLeg height: 85mmWarranty: 2 years

This CLAS folding crane has a capacity of 1 tonne, enabling you to lift heavy items such as engines quickly and easily.
Oncefolded, the crane takes up very little space in your workshop, optimizing your workspace.
Features
- Fully foldable crane
Features
Lifting capacity: 1 tonMaximum lifting height: 206cmLeg height: 185mmWarranty: 2 years

This 2-tonne CLAS folding crane will enable you to lift heavy items such as engines quickly and easily.
Oncefolded, the crane takes up very little space in your workshop, optimizing your workspace.
Features
- Fully foldable crane- Nylon wheels
Features
Lifting capacity: 2 tonsMaximum lifting height: 255cmWarranty: 2 years

This 300kg capacity CLAS pit jack will be your ideal companion to help you support or remove heavy items from the body, such as a gearbox.
The pedal is used to raise the jack.To lower it, turn the circular handle anticlockwise.
Specifications
Maximum lifting capacity: 300kgMinimum height: 112cmMaximum height: 189cmWarranty: 2 years

This CLAS gearbox support will enable you to lift or support all types of gearbox (manual, automatic) by attaching it to a pit jack with a 30mm, 35mm or 40mm piston (via the adapters included with it).
The supports and the front and rear arms, whose distance and angle of inclination are adjustable, ensure a perfect and safe grip during operation.
Features
Maximum load: 150kgFront/rear tilt: +/- 35°.Left/right tilt: +/- 5°.Warranty: 2 years

This CLAS battery-powered wheel lift with 60kg lifting capacity lets you raise and lower vehicle wheels effortlessly. Simply position the wheel on the lift and press the button to lower or raise it.
Features
- Maximum lifting capacity: 60kg- Permissible tire sizes: 135/80 R13 to 295/25 R22- Maximum lift height (to hub): 145cm- Lifting speed: 14cm/s- Lifting system: motorized screw- 4 swivel wheels for greater manoeuvrability- Anti-fall wheel safety device- Punch-type emergency stop button- Easy-to-rotate rollers for positioning the wheel on the hub- LED indicators: battery charge level, maximum charge capacity exceeded, emergency stop engaged, high auger motor temperature- 12V 12Ah batteries and 220V-AC charger included- Dimensions: 725 x 800 x 1710mm- Warranty: 2 years

This engine support, which fits on a bench, means an engine can be easily worked on at all angles with its pivoting type rotating system, very handy!
Only for VW flat 4-cylinder Type 1 and Type 4 engines.

This TOOLATELIER universal engine bracket has a maximum load of 450 kg.

For easier use, the reatiner head can be rotated 360°.

Its working height is 80 cm.

This engine support tool on a rolling base means an engine can be easily moved and worked on at all angles with its pivoting type rotating system, the best!
Only for VW 4-cylinder flat-type engines Type 1 and Type 4.

This engine support tool on a rolling base means an engine can be easily moved and worked on at all angles with its pivoting type rotating system, the best!
Only for VW 4-cylinder flat-type engines Type 1 and Type 4.