TOOLATELIER pressure sander

Details about : TOOLATELIER pressure sander

This TOOLATELIER pressure blaster comes complete with a sandblasting valve, 4 ceramic nozzles, a plastic funnel for loading abrasive, a 2.5 m abrasive hose, a pressure relief valve, a pressure gauge and a filter with pressure regulator.

Consisting of filter regulator and CE-approved tank.

Maximum working pressure: 8 bar
Capacity: 38L

Air consumption at 5.5 bar and recommended compressor size to be used on the blaster :
Nozzle ------ Flow ------ Recommended compressor
2mm ------ 200L/min----- 2-3 HP
2.5mm ------ 300L/min ----- 5.5 HP
3mm ------ 420L/min ----- 7.5 CV
3.5mm ------ 710L/min ----- 10 CV

Ceramic nozzles should not be used with alumina-based abrasives (aluminum oxide), silicon carbide (ceramic made almost exclusively from man-made minerals) or noble corundum.

To avoid damaging the blasting valve, it is important to use it with 100% opening, which will reduce the risk of it being pierced. ATTENTION: partial opening will damage the valve!

The manual is available as a PDF file.