Close

Back

Catégories

Autres catégories

Automotive magazine

Automotive tools

Bulbs

Car cleaning

Fasteners and hardware

Generic tools

Gift ideas

Greases

Motorcycle parts

Textile snow chain

Workshop tools

Wintering exit selection
flagGB
English

151,85 €

ATI

LOCTITE 574 joint sealing compound for flat surfaces with low clearance - tube - 250ml

LOCTITE 574 Joint Sealant (250ml) seals low clearance joints between rigid or machined metal surfaces or joint faces . The product cures when confined in the absence of air between metal surfaces with low clearance. It is resistant to low pressure...

See more
Qty :

Only 2 in stock

ref : UO93393

Only 2 in stock

Delivery mode

Collect at store Wambrechies (France) : Free

Home delivery : 39.00€

Sent by MECATECHNIC on: Monday, February 17, 2025

Description Product

Details about : LOCTITE 574 joint sealing compound for flat surfaces with low clearance - tube - 250ml


LOCTITE 574 Joint Sealant (250ml) seals low clearance joints between rigid or machined metal surfaces or joint faces . The product cures when confined in the absence of air between metal surfaces with low clearance. It is resistant to low pressure immediately after assembly. This instajoint is mainly used when assembling gearboxes, engine blocks, etc. The thixotropic nature of the paste prevents migration or creep of the product after application.

WARNING: This product is not recommended for use on plastics, especially thermoplastics!

ADVANTAGES :
- Fast-drying.
- Single component, quick and easy to apply.
- Produces an instant low-pressure seal once fully cured.
- Excellent resistance to water and glycol.
- High resistance to oil.
- Operating temperature range : -55 to 150°C
- Chemical compound: Methacrylate
- Fixing time on steel: 15 min
- Fixing time on aluminum: 45 min

USE COUNCIL:
- For best performance, surfaces must be clean and grease-free.
- The product is designed for joint surfaces with a gap of up to 0.25 mm.
- Apply the product as a bead by hand or by silk-screen printing on one of the surfaces.
- Low pressure (<0.5 MPa) can be used to test the seal immediately after assembly and before curing.
- Sealing surfaces should be tightened as soon as possible after closing, to avoid the risk of forming excess thicknesses.

Please observe the usual precautions.


Original reference OEM:

LOCTITE 574


Technical caracteristics

Mark

LOCTITE

Color

Orange

Capacity (ml)

250


Customer review

No commentary about the product

Met Trusted Shops kunnen we direct verbeteren dankzij uw opmerkingen op de MECATECHNIC website