Rear wheel cylinder with 8mm spanner fitting for 2cvs -LHM- 16mm - M8x1.25mm

Details about : Rear wheel cylinder with 8mm spanner fitting for 2cvs -LHM- 16mm - M8x1.25mm

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for 2cv cars and derivatives is a quality remanufacture.

This LHM rear wheel cylinder for 2cv saloons is faithful to the original.
It is compatible with the 2cv saloons and derivatives from July 1981 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

Original reference OEM:

95568486