Bonding putty

Heavy-duty bonding compound (300 ml). 
Sikaflex-552 AT is based on Sika's hybrid polyurethane technology (STP) and contains no isocyanates.
Recommended for mounting exterior elements requiring strong adhesion.
Recommended for the installation of spoilers, solar panels, etc. and all other objects in contact with bodywork.
Sikaflex-552 AT can be painted with most body enamels (including water-based enamels).
Pretreat with SIKA CLEANER 205.
Color: white.
Cartridge: 300ml.

Sikaflex-552 AT (300 ml) is a flexible, single-component hybrid adhesive for high-performance structural bonding.

It is capable of withstanding high dynamic stresses.

Example: decorative bodywork tabs, sheet metal joints...

This Sikaflex 552 AT joint is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the ISO 9001 quality assurance system and the ISO 14001 environmental management system.

Sikaflex-552 AT is ideal for structural assemblies subject to dynamic stresses.

Good adhesion to all materials normally used in body shops, such as metal primers, primers, metals and enamelled synthetics.

The products :

- Advanced hybrid technology
- Good adhesion to a wide range of substrates without primer
- Abrasion and impact resistant
- Withstands high dynamic stress
- High initial strength
- Fast curing
- Resistant to aging
- Low odor
- Non-corrosive
- Free from isocyanates and silicone solvents

Sikaflex 552 AT is a high-performance structural soft single-component hybrid adhesive.

It is capable of resisting high dynamic loads.

Example: decorative strips on the bodywork, sheet metal panel joints, etc.

This Sikaflex 552 AT sealant is based on Sika's hybrid polyurethane technology (STP). It is produced in accordance with the quality assurance system ISO 9001 and the environmental management system ISO 14001.

Sikaflex-552 AT allows structural assemblies that are subject to dynamic loads to be joined.

Good adherence to all materials commonly used in bodywork workshops, such as metal primers, primers, metals and enamelled synthetic materials.

Product advantages:

- Advanced hybrid technology
- Good adherence to a wide range of different unprimed supports
- Abrasion and impact resistant
- Resistant to high dynamic loads
- High initial resistance
- Fast hardening
- Resistant to ageing
- Emits little odour
- Not corrosive
- Does not contain isocyanates, silicone solvents or PVC

Colour: black
Contents: 300 ml

SIKAFLEX 252 from SIKA is a strong bonding putty . In the world of motorhomes, caravans and vans, it is recommended for mounting exterior components requiring strong adhesion: roof extensions, spoilers, solar panels, roof racks, etc...
Preliminary preparation with SIKA CLEANER 205 - 250 ml
Cartridge: 300 ml
Color: white.
Sold individually.

SIKALASTOMER 831E is a mastic tape specially designed for the installation andsealing of ventilation systems (hoods, chimneys, ventilators, skylights), profiles and rocker panels.
Color: gray.
Dimensions: 25 x 3 mm.
Sales unit: 12-meter roll.

TEROSON RB VII is a multi-purpose putty that provides excellent corrosion protection. Based on solvent-free synthetic rubber, it provides permanent plasticity. Repaintable, it can be used to cover andinsulate the underbodies of motorhomes, caravans and cars.
It can be applied to a wide range of materials (metal, wood, plastics).
Color: white.
Dimensions (lxh): 20x2 mm.
Rolls of 3 m.

Ref Teroson RB VII

Polyester putty reinforced with incorporated fibreglass.

- Forreplugging, sealing, insulating, stopping leaks, etc.

- Excellent adhesion on most substrates: metal, aluminium, polyester, plastic, etc.

- Can befiled, sanded, drilled, sawn, etc.

- Can be painted overby all typesof single-component and multicomponent paints such as epoxy, polyurethane,chlorinated rubber, automotive paint or boat paint, etc.

TEROSON MS 9120 white mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.

TEROSON MS 9120 gray mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.

TEROSON MS 9120 black mastic adhesive is a flexible, high-strengthsealant and bonding agent. A single-component, silane-modified polymer-based sealant that polymerizes by reaction with air humidity to form an elastic material, it contains no solvents, isocyanates, silicones or PVC, and is odorless. It ensures perfect adhesion to all substrates, without primers, whether painted metal (single- and two-component automotive paints) or plastic, such as spoilers, logos, spoilers, fender flares, skylights, solar panels, etc., and any other objects in contact with bodywork.
With no shrinkage, waves or stresses after curing, and excellent resistance to temperature, UV and weather conditions, it can be used both indoors and out. The uncured TEROSON MS 9120 bead is electro-weldable.

CAUTION: Not suitable for PE, PP, PTFE (e.g. Teflon) and PMMA (e.g. Perspex)!

Advantages :
- Recommended for mounting exterior elements requiring strong adhesion.
- Adheres to steel (degreased, phosphated, galvanized, painted), stainless steel, brass, aluminum (raw, anodized or painted), PC, polyester.
- Can be painted 30 minutes to 3 days after application.
- Skin-forming time: approx. 20 min.
- Good sag resistance.
- Isocyanate-free, solvent-free.

Instructions for use:
- Surfaces must be clean, dry and free of oil or grease (use TEROSON VR 10 cleaner, part no. UO99110, to be ordered separately).
- On thermoplastics, it is recommended to prepare the surface by sanding, and to carry out a test application beforehand.

Please observe all safety precautions.

Strong bonding compound. Colour: white
Recommended for assembling external elements that need strong adhesion.
Recommended for the installation of spoilers, solar panels, etc.
Prepare with SIKA CLEANER 205 - 250 ml.
Contents: 300 ml

SIKAFLEX 554 (300 ml) is a hard-wearing bonding putty recommended for mounting exterior components on motorhomes, caravans and converted vans requiring strong adhesion (roof extensions, roof racks, awning rails, etc.). It is highly resistant to ageing and weathering, and can be applied to a wide range of substrates without priming. It contains no phthalates.
Tip: Pretreat with SIKA CLEANER 205 - 250 ml (Ref: CS10933)

Color: black.
Cartridge: 300 ml.

Sikaflex 522 is a multi-purpose hybrid mastic adhesive (300 ml) with excellent adhesion. It offers excellent ageing and UV resistance. Its improved formula compared with Sikaflex 212 enables better spreading and easier smoothing with an even softer texture. 
It can be painted or sanded. 
For a good finish, smooth with soapy water before film formation. 
Accepted substrates: plastic, wood, concrete, composite materials, aluminum, sheet metal. 
Solvent- and isocyanolate-free.
Color: steel gray.
300-ml cartridge.

Sikaflex 522 is a multi-purpose hybrid mastic adhesive (300 ml) with excellent adhesion. It offers excellent ageing and UV resistance. Its improved formula compared with Sikaflex 212 enables better spreading and easier smoothing with an even softer texture. 
It can be painted or sanded. 
For a good finish, smooth with soapy water before film formation. 
Accepted substrates: plastic, wood, concrete, composite materials, aluminum, sheet metal. 
Solvent- and isocyanolate-free.
Color: black
300 ml cartridge.

SINTO hardener (30g) can be used with all Sintofer, Sintobois and Sintopierre polyester sealants, as well as all sealants other than resins and gel-coats.

Usually supplied under the lid of each two-component putty pot, the hardener loses its properties once opened. This tube, sold separately, will enable you to continue using your putties for many applications without having to buy a new pot.

WARNING: Not suitable for resins or gel-coats!

Please observe all safety precautions.

LOCTITE MR 5923 (450ml) is a low-viscosity liquid sealant for rocker covers and oil pans, available at . Once applied, it dries slowly to a flexible, tacky film after evaporation. Drying time varies with temperature, humidity and clearance. Typical applications include pre-cut rigid or flexible joint assemblies.
It resists water, ethylene glycol, gasoline, engine oils and transmission fluids.

ADVANTAGES :
- Professional format.
- Sealant remains flexible after drying.
- Ideal for assembling parts after repairs.
- Low viscosity.

FEATURES :
- Seal type: rigid or flexible
- Operating temperature : -54 to 204°C
- Oil resistance: good
- Water/glycol resistance: good
- Capacity: 450 ml

USE COUNCIL:
- Remove all old product from joint surfaces.
- For best results, clean and dry surfaces
surfaces with a clean solvent.
- Remove cap. Apply with the applicator pad.
- If used as a sealant, spread evenly with a spatula.
evenly with a spatula on one side of the joint
then position it on the assembly. Coat the
second side of the joint, then assemble the parts.
(its slow drying gives more time to these operations).
- Assembly is operational within 4 hours, with full hardening
full hardening takes place 24 hours later.
- The product can be removed from metal surfaces
isopropyl alcohol. If the product has been dry for
or if it has been subjected to high temperatures
temperatures, cover the joint with alcohol and allow it to soften
overnight.

ATTENTION: aerosols, resins, sealants and other chemical products cannot be shipped by air (DOM TOM)!

Please observe the usual precautions.

Sikaflex 521 UV mastic adhesive is based on Sika 's hybrid polyurethane technology (STP, Sika technology). It contains no isocyanates, solvents, VOCs, silicone or PVC.)
Polymerization takes place under the action of ambient humidity, to form a durable elastomer.

Product benefits:
- Excellent resistance to ageing and climatic conditions.
- Adheres to a wide range of substrates: wood, metals, primers and paints (two-component), ceramics and plastics.
- Flexible.
- Can be sanded and painted.
- Low odor.
- Non-corrosive.
- Temperature range: -40°C to 90°C.

We recommend it for mounting exterior components on your motorhome, caravan or van, requiring strong adhesion, goodresistance to ageing and UV rays. In particular, for the installation of spoilers, solar panels, etc. and any other objects in contact with bodywork.

Pretreat with optional SIKA CLEANER 205 degreaser.

Color: white.
Cartridge: 300ml.
Pack of 3 cartridges (3 x 300ml).

Sikaflex 521 UV mastic adhesive is based on Sika 's hybrid polyurethane technology (STP, Sika technology). It contains no isocyanates, solvents, VOCs, silicone or PVC.)
Polymerization takes place under the action of ambient humidity, to form a durable elastomer.

Product benefits:
- Excellent resistance to ageing and climatic conditions.
- Adheres to a wide range of substrates: wood, metals, primers and paints (two-component), ceramics and plastics.
- Flexible.
- Can be sanded and painted.
- Low odor.
- Non-corrosive.
- Temperature range: -40°C to 90°C.

We recommend it for mounting exterior components on your motorhome, caravan or van, requiring strong adhesion, goodresistance to ageing and UV rays. In particular, for the installation of spoilers, solar panels, etc. and any other objects in contact with bodywork.

Pretreat with optional SIKA CLEANER 205 degreaser.

Color: black.
Cartridge: 300ml.
Pack of 3 cartridges (3 x 300ml).

Durable, ultra-solid repairs in seconds. Can be sanded and painted over. Magic Fix is a glue and filler ensuring
fast and strong repair of different materials.

Repair (almost) anything with Magic Fix. Super glue to be combined with black and grey reinforcement powder. If it's worth repairing: repair,

sand and paint! Ready to go!

This product enables you to quickly restore objects to their original condition. Can be used on visible or non-visible parts. After repairing,Magic Fix can be
sanded and painted over.
Durable, ultra-solidrepairs in seconds.

Use Magic Fix for glueing, filling andrepairingdifferent materials such as steel, plastics, aluminium, fibre glass, carbon fibreand rubber.

Fill cracks or spaces, forexample:

- carbumper fixing points
- hard plastic door handles
- fillingand redrilling
- refitting screws
- rear-view mirrors
- tappet covers
- grills
- bumpers

Contents of the kit:

- 6 x 10 ml bottles of glue
- 2 x 22 g black reinforcement powder
- 1 x 22 g grey reinforcement powder
- 1 plastic spatula
- 6 red caps
- 6 tubesfor hard-to-reach places
- 1 vinyl glove

For positioning rear and limiting lights.
Also recommendedfor assembling the roof, bumpers, fridge grilles...
Colour: grey.
Dimensions: 25 x 3 mm.
Sold as a 15 metre roll.