Engine parts cleaners

WD 40 Multifunction in 5-liter can format includes the same product solution as the aerosols. It can be used by consumers of WD40 as well as professional mechanics, garage owners and experienced DIY enthusiasts for all their renovation, mechanical and DIY work.Its economical canister format makes it particularly suitable for the thorough cleaning of spare parts for cars, bikes, scooters, motorcycles, etc...You can pour just the right amount of multi-purpose solution into a container, tub or other vessel as a soaking bath , so you can work simply and effectively with a brush, for example.Its fluidity will also enable you to use it as a spray with a sprayer (not supplied) for other uses.
WD40 has been used for many years in professional workshops to free rusted parts, remove moisture, protect, lubricate, eliminate squeaks, remove traces of residues, glues,adhesives etc...
Advantages of WD40 multi-purpose can:- Does not dry instantly.- Silicone- and chlorinated-solvent-free multi-purpose formula.- 5-liter format for professional use.- Can be used as a dip bath or spray.- Compatible with plastics, rubbers and all metals or alloys.- Non-conductive.
Please observe safety precautions.

LOCTITE SF 7200 joint stripper is an aerosol product designed to remove cured joints and traditional joints from metal joint faces before re-applying a new joint. Its action consists in softening them in 10 to 15 minutes, thus reducing the need for intense scraping operations. This CFC-free solvent-based cleaner is suitable for most surfaces, includingaluminum and other soft metals. Once applied, it covers the joint with a foam, preventing it from running out of the desired area, while allowing it to work for the required time. Your surfaces will be perfectly clean, with a minimum of scraping and a reduced risk of damaging joint surfaces.
It can also be used to easily remove adhesives, hardened oils and greases, scale, paint and varnish deposits, etc. from joint faces and metal surfaces.

WARNING: Its use is not recommended on plastics, as this product attacks paints!

Advantages :
- CFC-free, solvent-based cleaner.
- Ideal for quickly removing old joints.
- Can be used on most surfaces (except painted).
- Minimal scraping required (highly recommended for fragile, soft materials such as aluminum, copper and bronze).
- Does not run, even on vertical surfaces.

Recommendations for use:
- Protect painted surfaces, as this product attacks paint.
- Hold the aerosol upright, about 20-30cm from the surface to be treated, and apply as thick a coat as possible.
- Leave to act for 10 to 15 minutes to soften anaerobic joints, and 30 minutes for silicone joints.
- Remove the old, softened sealant with a spatula and simply wipe or clean the surface (repeat if necessary).
- Before applying the new joint compound, clean surfaces with a suitable cleaner such as LOCTITE 7063 (order no. UB25018 separately).

Please observe all safety precautions.

ALL CLEAN UNIL OPAL 500ml multi-purpose degreasing cleaner is THE ecological solution for cleaning and maintaining your car , motorcycle, camper van, van, workshop or garage. Super-powerful yet 100% biodegradable, harmless to health, propellant-free and made in France, it reduces your impact on theenvironment.
Extremely effective on all types of surface, it is harmless to plastics, body varnish, paint, chrome, metals, etc... Try it and you'll love it!
Its solvent-free, water-based formula of specific surfactants lifts and removes even the most stubborn dirt : grease, oil, carbon residues, various deposits, etc., with maximum efficiency.

WARNING: For sensitive metals such as zinc, brass, aluminum alloys including those containing silicon, it's advisable to carry out compatibility tests beforehand!

Advantages:
- Economical 500ml format, easy to use and ready to use.
- 100% biodegradable (helps protect the environment).
- Can be used in the food industry by rinsing with drinking water.
- Unlabelled (not classified for your health under CLP EC regulation no. 1272/2008).
- Solvent-free, fragrance-free and propellant-free (can be shipped by air to French overseas departments and territories and abroad).
- Contains no volatile organic compounds (VOCs).
- NFS A1 approved.

Directions for use :
- Spray directly onto surfaces to be treated.
- Leave to act for a few minutes, or brush over heavily soiled surfaces.
- Wipe off with a clean cloth.
- Rinse with drinking water in the agri-food sector.

Please observe all safety precautions.

This spray contains a non-chlorinated degreaser which is perfect for cleaning your mechanical parts such as engine crankcases, spark plugs, levers, shock absorbers, rims, etc.

The formula enables you to dissolve all grease, oil or tar.

You can also use this product as a brake cleaner. It will remove dust and residue from brake pads and your clutch disc.

LOCTITE SF 7063 degreasing cleaner is a general-purpose product for cleaning and degreasing all surfaces or mechanical parts prior to repair, assembly or bonding with LOCTITE adhesives and joint compounds. It is a CFC-free solvent-based cleaner which leaves no residues. It removes all traces of grease,oil, lubricating fluid or fine particles. Your surfaces will be perfectly cleaned before assembly.

Advantages :
- CFC-free, solvent-based cleaner.
- Ideal for surface preparation prior to bonding and sealing.
- Removes grease, oil, lubricants, metal chips and fine particles from surfaces.
- Leaves no residue.

Directions for use :
- Treat surfaces to be cleaned by spraying or wiping with a solvent-soaked wipe.
- Wipe surfaces still damp with clean paper to remove heavier soiling.
- Repeat if necessary.
- Allow sufficient time for the product to evaporate and the surface to dry thoroughly.
- Apply LOCTITE adhesive or joint compound immediately after drying and proceed with assembly.

Please observe all safety precautions.

TECHNIQUE 3-EN-UN Super Degreaser (500ml) quickly and effectively removes oils, greases, brake dust, tar stains and other deposits or residues thanks to its powerful active solvents.An excellent brake cleaner, it is also recommended for refurbishing chains, engine parts, rollers, ball joints, blades, hand tools, lawnmowers, etc....It's ideal for cleaningclutch mechanisms, working on brake systems and any other mechanical operation requiring perfect decontamination before assembly or lubrication.
The benefits of Super Degreaser 3 in 1 Technique :- Fast, highly effective action without chlorinated solvents.- Leaves no traces even after drying.- Can be used between +5°C and +30°C- Compatible with all metals, alloys, plastics and rubbers.
ATTENTION: aerosols cannot be shipped by air (DOM TOM)!
Please take the appropriate precautions.

Area of application:

- For surface preparation of glass and automotive parts (glass, plastic, metal)
- Application with lint-free cloth or brush.
- Unique silicone stain remover for optimal surface preparation.

Features :

- Universal cleaner, glass and plastic repair, silicone remover.
- Application with lint-free cloth or brush
- Very short drying time
-Product base: white spirit
- For surface preparation on paint, metal and plastic

Application :

- For preparing glazing operations and surfaces (glass, plastic, metal).
Apply with a clean cloth or brush (Teroson FL is a thinner that can be used with other Teroson products).