Forming tool

These TOOLATELIER hammers and bits are specifically designed for bodywork.

This set of tools is ideal for all sheet metal work, fender stripping, doors... It includes 3 hammers and 4 different piles.

3 bodywork hammers :
Flat round head - Flat square head
Flat square head - flat rectangle
Flat round head - pointed round head

4 Hand heaps :
Half round
Slightly curved anvil
Pronounced curved anvil
Half apostrophe

Supplied in a storage box for easy storage and transport.

This TOOLATELIER fender widener, also known as a"Roller Fender", will enable you to straighten your vehicle's wheel arches.
It can also be used to widen the wheel arches to accommodate larger wheels without rubbing the sheet metal.
It is attached to the wheel hub to obtain the same working angle.

1st position: 105
2nd position: 90
Head angle: 180
Min. arm length: 38 cm
Max. arm length: 51 cm
Mounting centres: 4 x 100 / 4 x 108 / 5 x 100 / 5 x 112 / 5 x 120 / 5 x 130

For hub with max. centering: Ø 73 mm

This jig is ideal for copying the fine contours of bodywork, woodwork... to perfection.

It has a maximum measuring depth of 30 mm and a maximum width of 125 mm.

This tool can also be used for model-making.

This tool is ideal for quickly creating body contours.

It is lockable, no modifications after copying the contour.
It has 4 magnets on the back for ease of use.

The maximum measuring depth is 30 mm with a width of 255 mm.

- Hammer for stretching and planing.
- 1 convex head and 1 flat square head.
- Safety clamp.
- Fine polishing of surfaces to be planed.
- Hickory handles.

- Spare handle and wedge: 211.MH26.

This shape duplicator, also called a profile comb or contour gauge enables you to automatically copy your bodywork parts, etc.

Length: 260 mm
Magnetic holder: yes

Manufactured from Forged Steel.
Made from 1055 Medium Carbon Steel.
Three polished faces: Concave | Convex and Right Angle.
Professional quality.
Professional quality.
Weight 2360Grams | Length 520mm.

Traction using adhesive pads is the ideal repair process when it is difficult to access the back of the dent that is to be repaired. What's more, when used with caution this kit avoids any damage to the paintwork.

Ideal for reducing light dents and traces of impact.

This glue gun works with butane gas (lighter gas). Very practical because there-s no need to have a power supply nearby.

It can be started quickly and easily with the push-button piezo ignition.

Its continuous operating time ranges from 45 to 60 minutes.

It has an instant glue flow cut-off to reduce dripping. And a safety lock on the gas flow to prevent accidental use.

Size: 147 x 35 x 152 mm
Weight: 224 g

- for inexpensive dent repairing
- hot melt glue gun with 2 glue sticks
- 1 plastic scraper for removing glue
- 1 soft panel beating pen

- with excellent adhesive properties on car bodies
- includes: 10 pcs.

Kit includes panel contour guide with suction cap.
Extended and angled access.
Magnetic rollers shows the correct positioning of the tool when used with supplied ball bearings.
Time saver.
Time saver.
Repair panels without removing the skin.

0

- suitable for repairof minor dents
- paintingand filling work are unnecessary
- no color differences
- reducestime and cost
- includes:
- 9 dent pads in various sizes and shapes
- special adhesive glue sticks with very good
performance for bestresults
- sliding hammer to pull out hard dents
- pulling unit with rubberized feet for slight
dents on flat surfaces
- plastic scraper for gentle removal of dent pads

Ideal for removing small dents and dings from bodywork that doesn't require painting.

You'll need a traditional glue gun and special bodywork glue ref. UO09003.

Length of slide hammer with adapter: 460 mm
Thread of the adapter: M12 x 1.75
Hammer material: aluminium

Sizes of the suction cups:

- Round Ø 15, 20, 25 mm
- Large round: Ø 32, 36, 42 mm
- Oval: 23x34, 28x41, 33x48 mm
- Rectangle: 20x30, 23x35, 32x49 mm

This aluminium panel beating hammer is designed to fit fragile materials.

The head diameter is 45 mm with a length of 360 mm.

This tool set is used for paintless dent removal.

It features 4 interchangeable tips for various bodywork jobs.

Its weight is 110g.

Head manufactured from 1055 Medium Carbon Steel.
Crown face with curved cross pein.
Genuine hickory shaft.
Professional quality.
Professional quality.
Weight 405 grams.

Head made from 1055 Medium Carbon Steel.
Flat face, round head and milled square face.
Genuine Hickory shaft.
Professional quality.
Professional quality.
Weight 420grams.