Flywheel lock

This set of flywheel pullers will be useful to separate the inertia flywheel from the crankshaft.

Contents:

1 piece: M14 x 1.5
1 piece: M16 x 1.5
1 piece: M18 x 1.5
1 piece: M19 x 1.0
1 piece: M20 x 1.0 and M27x 1.25
1 piece: M22 x 1.0 and M25 x 1.5
1 piece: M22 x 1.5 and M26 x 1.5
1 piece: M24 x 1.0 and M27 x 1.0
1 piece: M26 x 1.0 and M28 x 1.0
1 piece: M28 x 1.5

Right hand thread, except M27 x 1.0.

- Applications: for Volvo/Renault
- Engine types: MP8, MP10 (FH,D13a 520)
- Sizes: Internal diameter 19 mm x external diameter 38.8 mm x 71 mm long. Hexagonal 26 mm
- Square drive: 1/2

This tool is used to hold the inertia flywheel when loosening the central bolt of the crankshaft pulley.

Applications:

Citroen:

Petrol engine:

- Xsara, Xantia: 1.8 / 2.0 (XU7JP / JB)
- Xsara: 1.8 16V (XU7JP4)
- ZX / Xantia / XM: 2.0 16V (XUD9BTF)

Diesel engines:

- Xantia: 1.9D/TD (XUD9BTF)
- Xantia XM: 2.1TD (XUD11BTE)

Peugeot:

Petrol engines:

- 406: 1.8/2.0 (XU7JP/JB)
- 406: 1.8 16V (XU7JP4)
- 306, 405, 605: 2.0 16V (XU10J4)

Diesel engines

- 406: 1.9D/TD (XUD9BTF)
- 406, 605: 2.1TD (XUD11BTE)

OEM Codes: 0134Q / 0153A / 0153AF / 0188-F / 7044-T / 9004-T / 9022-TM / 9044-T

Applications for Hyundai from 2007 to 2018: Accent, Elantra, i10, i20, i30, i40, ix20, ix35, Santa Fe, Tiburon, Tuscon, Veloster

Applications for Kia from 2007: Carens, Cee'd,Optima, Picanto, Pro-Cee'd, Rio, Sedona, Sorento, Soul, Sportage, Venga

Engine codes: 1.0 G3LA, GELC 1.2, G4LA 1.4, G4LC,G4FA 1.6, G4FC, G4FD, G4FJ 2.0 G4KD, G4KF, G4NC, G4NA, G4ND, G4NE 2.4, G4KE, G4KJ 2.7 G6BA

This tool allows the flywheel to be locked quickly and easily by its ring gear when the clutch and flywheel are removed.

It can also be used to lock the ring gear when checking the play of the dual mass flywheel.

Its unique sawtooth design makes it easy to adjust and lock.

It is comes with M10 and M12 bolts to fit the crankcase holes and spacers to allow a gap to the engine block.

- facilitates the disassembly andassembly of
clutch cover and flywheel
- harded gear segment for locking starter gear rings

- To lock the flywheel ring gear.
- Dimensions (lxwxh): 30 x 46 x 25mm.
Weight: 21 g.

This special tool is needed to adjust the fuel pump and adjust the engine.

Suitable for Renault Magnum models.

It is made of chrome-plated vanadium steel.

To block the flywheel and to unscrew easily the nut.

Provided for flywheels engine 190 teeth (6 V) and 130 teeth (12 V)
for VOLKSWAGEN Combi Split Brazil (1957-1975)

To block the flywheel and to unscrew easily the nut.

Provided for flywheels engine 190 teeth (6 V) and 130 teeth (12 V)
for Old Beetel & Kombi.

Tool to lock the engine flywheel on PSA vehicles (Peugeot, Citroen) and some FIATs

Example of vehicles:

Citroen: Berlingo, Relay, Synergie 1.9D/TD / 2.0T engine code RFU, RFW, RGX
Peugeot: 205, 305, 306, 309, 405, 605, 806, Boxer, Partner, Expert 1.6, 1.9D, TD engine code: XUD7, XUD9, XUD7TE, XUD9Y, XUD9A

For Rover 214/216/400/25/Streetwise/45/ZR/ZS versions without PG1 gearbox.

This tool is also used for MG versions: MGF TF ZR, ZS, ZT, ZT Turbo.

For locking the flywheel when charging the cam belt
OEM No KM 911
For use on the Z18 XE Vauxhall engine
Time Saver

Suitable for Dieseland petrol engines on Ford models.
Place on the ignition to prevent theflywheel from moving.

Manufacturer's code 21-168 / 303-393 with 11.5mm retaining teeth and 303-393-02 with 41.5mm retaining teeth.

Ideal for locking the flywheel on Diesel and petrol engines with a timing chain - BMW

List of applications: BMW M47T2, M57T2, M67, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 (in addition to BMW Mini with W17 Diesel engine)

OEM codes: 11 8 180, 11 8 181, 11 8 182, 11 8 183, 11 8 184, 11 8 185

Can be used on VW, Skoda and Seat versionsequipped with a 1.9TDi Diesel engine.