Clutch kit

This quality kit should replace the entire kit on the car. The SACHS dual mass flywheel is only compatible with the SACHS clutch.

For Golf 4 and Bora (including 4 Motion) :
- 1.9 TDi 130hp (ASZ)
- 1.9 TDi 150hp (ARL)

Clutch kit for Mercedes SL

For Mercedes SL R107:
- 280 SL (107.042) up to chassis No. 004425

For Mercedes SLC Coupe C107 :
- 280 SLC (107.022) up to chassis N°005461

The clutch kit consists of the disk, the mechanism and the clutch bearing
Diameter 230mm
German quality

SACHS clutch kit for Volkswagen Passat B3 and B4
For VW Passat B3 and B4 including Syncro :- 2.8 VR6 174hp (AAA)- 2.9 VR6 184hp (ABV)
228mm clutch kit complete with disc, mechanism and release bearing
Original SACHS quality

For S3 (8L):
- 1.8 Turbo 210hp (APY, AMK)
- 1.8 Turbo 225hp (BAM)

For Roadster & Coupé:
-Z3 M S50 & S54

Clutch kit for Bmw 3 Series:
Bmw 3 Series E36 Sedan:
- 323i 2.5L 170hp from 07/1994 to 05/1998 (engine code M52B25)- 325i 192hp from 11/1989 to 08/1992 (engine code M50B25)- 325i 192hp from 09/1992 to 07/1995 (engine code M50B25TU)
Bmw 3 Series E36 Touring:
- 323i 2.5L 170hp from 11/1995 to 05/1999 (engine code M52B25) - 325tds 143hp from 10/1994 to 05/1999 (engine code M51D25)
Bmw 3 Series E36 Compact:
- 323ti 2.5L 170hp from 01/1997 to 02/1999 (engine code M52B25)
Bmw 3 Series E36 Coupé and Cabriolet:
- 325i 192hp from 10/1990 to 08/1992 (engine code M50B25)- 325i 192hp from 09/1992 to 07/1995 (engine code M50B25TU)- 323i 2.5L 170hp from 07/1994 to 04/1999 (engine code M52B25)
Completeclutch kit compatible with dual-mass flywheel not included.

Complete 240 mm clutch kit with rigid flywheel to replace the original dual mass flywheel.

Clutch release bearing NOT included.

Compatible with Seat Leon type 1P:
- 2.0 TDi 136hp (AZV) from 07/2005 until ->05/2010
- 2.0 TDi 140hp (BMM) from 10/2005 until ->10/2010
- 2.0 TDi 170hp (BMN, CEGA, CFJA) from 05/2006 until ->12/2012

For Polo 6N:
- 1.05 45hp (AEV) 94 ->96
- 1.3 54hp (ADX) 94 ->08/95
- 1.4 54hp to 75hp (AEX, AKV, ANX, APQ, AUA, AUD) 09/95 ->01/00

This kit consists of a rigid flywheel, a pressure plateand a 240 mm disc.
An economical and high performance alternative to the original assembly, for replacement of the original clutch and dual mass flywheel.

For A3 (8L):
- 1.8 Turbo 180 hp (APP) from 06/00 ->05/03
- 1.8 Turbo150 hp Quattro (AGU, AQA, ARX) with 6-speed gearbox from 97 ->05/03
- 1.8 Turbo 180 hp Quattro (AJQ,ARY) with 6-speed gearbox from 06/99 ->05/03
- S3 Quattro 210 hp (AMK, APY) from 05/99 ->05/03
- S3 Quattro 225 hp(BAM) from 10/01 ->05/03 (up to chassis 8L-3-027774 or 8L-31207324)

For TT (8N):
- 1.8 TurboQuattro180 hp (AJQ, ARY) from 09/00 ->10/05
- 1.8Turbo Quattro 190 hp(BVR) from 02/00 ->06/06
- 1.8 Turbo Quattro 225 hp (APX, BAM) from 09/00 ->10/05

Complete clutch kitdiameter 200mm and 17 teeth Mecatechnic selection for MINI III R60 Countrymanand R61 Paceman :

R60 Countryman:
- Cooper 1.6L 122hp from 01/2010 to 10/2016 (engine code N16B16)

- One 1.6L 98hp from 01/2010 to 09/2016 (engine code N16B16)

R61 Paceman:
- Cooper 1.6L 122hp from 04/2012 to 09/2016 (engine code N16B16)

Diameter: 200 mm
Number of teeth: 17

This kit includes the mechanism, the disc as well as the disc for disengagement. The flywheel is not included.

Suitable for:
- E39 525D and 530D, M57 engine from 05/00 to ->07/03
- 540 i M62 since 06/96 ->

For X5 E53:
- 3.0d M57

Jp Group Clutch kit for Bmw 3 Series:
Bmw 3 Series E30 Sedan :
- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
Bmw 3 Series E30 Touring :
- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)
Bmw 3 Series E30 Coupé :
- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)
Bmw 3 Series E30 Cabriolet :
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)
Kit composition :
- Clutch mechanism- Clutch disc- Clutch release bearing

Complete kit containing the mechanism, disk and stop, designed to be installed on the original dual-mass engine flywheel in good condition.

for Audi A3 (8L) 5-speed gearbox 00 ->03
(since chassis 8L-Y-175 001->) except Quattro:
- 1.8 20V Turbo 150hp (AGU, AQA, AUM, ARZ, ARX)
- 1.8 20V Turbo 180hp (AJQ, AUQ, ARY)
- 1.8 20V Turbo 180hp (APP since engine 025 198->)

This clutch kit and Acadiane - (04/1982-03/1987) is compatible with DYANE and Acadiane with 18-spline disc and Diaphragm mechanisms.

This clutch kit for Dyane and Acadiane was fitted from April 1982 until the end of production. This kit includes:
- diaphragm mechanism
- release bearing
- 18-spline clutch disc

Check compatibility by counting the number of splines on your clutch disc.

For Audi 80 from 1991->:
- 2.3 133hp (NG) including Quattro

For Audi 90 from 1987->:
- 2.0 115hp (PS)
- 2.2 133hp (KV) including Quattro
- 2.3 133hp (NG) including Quattro

For Saloon and Avant:
- 1.9 TDi 130 (AVF)
(Including Quattro)

This reinforced clutch kit for 2CV after 1982 - 18-spline disc and diaphragm mechanism is compatible with 2CV and derivatives from 1982.
This reinforced clutch kit for 2CV is of superior quality. Designed for racing, it features a reinforced disc, rivets and diaphragm plates, and offers endurance and resistance to high temperatures superior to any other clutch on the market.
Kit includes- reinforced diaphragm mechanism- release bearing- clutch disc with reinforced rivets
compatible models : - 2CV 6 type AZ KA/A2: 04/1982 to 07/1990- DYANE 6 type AYA3/AYB/AY-CB: 04/1982 to 08/1983- Acadiane type AY-CD: 03/1978 to 03/1987- Méhari série2_type AY-CA: 04/1982 to 07/1987- Méhari Azur type AY-CA: 04/1982 to 07/1987
Check compatibility by counting the number of splines on your clutch disc.

For Passat 4 (3B2 and 3B5):
- 1.6 100hp (ADH, AHL)
Up to chassis ->3BWE-062-700 & ->3BWP-022-520

Complete SASIC clutch kit for Peugeot 205 Diesel 1.8L and 1.9L.
Fits in place of the original on models with BE1 gearbox, up to July 1989, reverse gear top left.

Original equipment quality part

Kit includes friction mechanism, friction disc, thrust bearing and centering device.

Specifications:
Disc diameter: 200mm
Stop: 24.5mm
Number of splines: 18

Applications:
- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1989
- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1989
- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 09/1989
- 1.9 D 1905cc 65hp (XUD9) until 07/1989