Joint yoke

For A4 (B5),
with manual gearbox:
- 1.6 100hp (ADP)
- 1.6 100hp (AHL) up to chassis ->8D-W-109971
- 1.8 115hp and 125hp (AFY, ADR, APT, ARG, AVV)
- 1.8 150hp (AEB, ANB, APU, ARK, AWT)
- 1.9 TDi 90hp (1Z)
- 1.9 TDi 90hp (AHH, AHU) up to chassis ->8D-W-109971
- 1.9 TDi 110hp (AFN) up to chassis ->8D-W-109971

for A4 (B5) up to chassis ->8D-W-109971,
with automatic gearbox:
- 1.9 TDi 90hp and 110hp (1Z, AHU, AFN)
- 1.6 100hp (ADP, AHL)
- 1.8 115hp and 125hp (AFY, ADR)
- 1.8 150hp and 180hp (AEB, AJL)

For A6 (C5),
with manual gearbox:
- 1.8 115hp and 125hp (AFY, AJP, AQE, ARH)
- 1.8 150hp (AEB, ANB, APU, ARK)
- 1.8 150hp (AWT) up to ->04/01

For A6 (C5),
with automatic gearbox:
- 1.8 115hp and 125hp (AFY, AJP, AQE, ARH)

This kit includes the universal joint, the constant velocity joint and the mounting kit,

For A3 (8L):
- 1.8 Turbo 150 hp (AGU, AQA, ARZ, AUM)
- 1.8 Turbo 180 hp Quattro (AJQ, ARY)
- 1.9 TDi 100 hp (ATD, AXR)
- 1.9 TDi 130 hp (ASZ) including Quattro
- S3 210 hp (APY, AMK, AUL)
- S2 225 hp (BAM)

For A4 (B5):
- 1.6 102hp (ALZ)
- 1.8 Turbo 180hp (AJL)
- 2.4 163hp and 165hp (AMM, AJG, AGA, ALF, AML, APS, APZ, ARJ)
- 2.5 TDi 150hp (AFB, AKN)
- 2.6 139hp and 150hp (ACZ, ABC) except automaticgearbox
- 2.8 174hp (AAH)
- 2.8 190hp and 193hp (ATX, ACK, ALG, APR,AQD)

for A6 (C5):
- 1.8 180hp (AJL)
- 1.9 TDi 110hp and 115hp (AVG, AFN, AJM)
- 1.9 TDi 130hp (AVF, AWX)
- 2.0 130hp (ALT) exceptautomatic gearbox
- 2.4 136hp and 156hp (ASM, ALW, APC)
- 2.4 163hp (AJG, AMM, APZ)
- 2.4 165hp and 170hp (AGA, ALF, AML, APS, ARJ, BDV)
- 2.5 TDi 150hp (AFB, AKN)
- 2.5 TDi 180hp (AKE)
- 2.7 Turbo 230hp (AJK)
- 2.8 180hp (AGE, ALG)
- 2.8 190hp and 193hp (ATX, ACK, AMX, APR,AQD)

Kit includes universal joint, bellows and mounting kit, for left or right front,

For A4 (B6) Sedan and Avant (8E5) with manual gearbox from chassis 8E-4-000001 :
- 1.8 163hp (BFB)
- 1.8 170hp (AMB)
- 1.8 190hp (BEX)
- 1.9 TDi 101hp (AVB)
- 1.9 TDi 116hp (BKE)
- 1.9 TDi 131hp (AVF, AWX)
- 2.4 163hp (AMM)
- 2.4 170hp (BDV)
- 2.5 TDi 155hp (AYM)
- 2.5 TDi 163hp (BCZ, BDG, BFC)
- 3.0 220hp (ASN, BBJ)

This kit includes the universal joint, the constant velocity joint and the mounting kit,

For Coupé:
- 1.8 Turbo 190 hp (BVR)
- 1.8 Turbo 225 hp (BAM, AMU, APX)
- 1.8 Turbo 240 hp (BFV)

For convertible:
- 1.8 Turbo 190 hp (BVR)
- 1.8 Turbo 225 hp (BAM, AMU, APX)

For Golf 4 and Bora
With 6-speed manualgearbox:
- 1.8 20v turbo 180hp (AUQ)

With 6-speed manual gearboxincluding 4 motion versions:
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 115hp (AJM)
- 1.9 TDi 130hp (ASZ)
- 1.9 TDi 150hp (ARL)
- 2.3 170hp (AQN)
- 2.8 204hp (BDE)

With 5-speed automatic gearbox:
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 115hp (AUY)
- 1.9 TDi 130hp (ASZ)
- 2.3 170hp (AQN)
- 1.8 20v turbo 150hp (AUM)

For Passat 5 with manual gearbox:
- 1.6 102hp (ALZ)
- 2.0 131hp (ALT)
- 1.8 150hp (AWT) from 05/01->

For Passat 5 with automatic gearbox:
- 2.0 115hp (AZM)

For Golf 2 :
- 1.6 with carburetor ->10/91
- 1.6 Diesel & TD
- 1.8 with carburetor ->07/89

Not suitable for 6N2, AMF, APE, ATL engines

CEVAM inner cardan joint kit for Audi A4 B5
For Audi A4 B5:- 1.8 Quattro 125hp (ADR, APT, ARG) up to 01/1999 (front axle only)- 1.8 T 150hp (AEB, ANB, APU, ARK, AWT) from 10/1995 (front axle only)- 1.8 T Quattro 150hp (AEB, ANB, APU, ARK, AWT) from 10/1995 (front axle only)- 1.8 T 180hp (AJL)- S4 Quattro 2.7 265hp (AGB, AZB) Front and rear axles- RS4 Quattro 2.7 380hp (ASJ, AZR) Front and rear axles
Gearbox-side internal knuckleLeft or right side, sold individually
Complete kit with seals, clamp, screws, bellows, grease and spacers

CEVAM internal cardan joint kit for Audi A6 C4
For Audi A6 C4:- 2.0 100hp (AAE) until 06/1996- 2.0 115hp (ABK) until 06/1996- 2.0 16V 140hp (ACE)- 2.0 16V Quattro 140hp (ACE) Front and rear axles- 2.3 133hp (AAR)- 2.6 Quattro 150hp (ABC) Front and rear axles- 2.8 Quattro 174hp (AAH, AFC) Front and rear axles- S6 2.3 Turbo Quattro 230hp (AAN)- S6 4.2 Quattro (AEC) from 09/1994 (front and rear axles)- S6 Plus Quattro 4.2 326hp (AHK) Rear axle only
Gearbox-side inner knuckleLeft or right side, sold individually
Complete kit with gaskets, collar, screws, bellows, grease and spacers

CEVAM inner cardan joint kit for Audi A6 C5
For Audi A6 C5:- 1.8 116hp (AFY) until 05/2000- 1.8 125hp (AJP, AQE, ARH) from 12/1997 to 04/2001- 1.8 T 150hp (AEB, ANB, APU, ARK, AWT) from 04/1997 to 05/2004- 1.8 T Quattro 150hp (AEB, ANB, APU, ARK, AWT) from 04/1997 to 05/2004 (Front axle only)- 2.7 T 230hp (AJK) until 08/2000- 2.7 T Quattro 230hp (AJK, AZA) from 02/1999 to 05/2001 (Front axle only)- 2.7 T Quattro 250hp (ARE, BES) Front and rear axles- 4.2 Quattro 299hp (ARS, ART, ASG, AWN) from 04/1999 (front and rear axles)- S6 Quattro 340hp (ANK, AQJ) manual gearbox only (front and rear axles)- RS6 Quattro 450hp (BCY) Rear axle only- RS6 Plus Quattro 480hp until 09/2004 (rear axle only)
Gearbox-side internal knuckleLeft or right side, sold individually
Complete kit with gaskets, collar, screws, bellows, grease and spacers

Gearbox-sideinternal knuckle for Audi A3 2 (P)
For Audi A3 8P Manual gearbox only:- 2.0 TDI 136hp (AZV, CBAA, CFFA)- 2.0 TDI 140hp (BMM, BKD, CBAB, CFFB, CLJA)- 2.0 TDI 170hp (BMN, CBBB, CFGB)
Gearbox side (inside), right or left cardan shaft Outside diameter: 108mmNumber of gearbox-side teeth: 28

Gearbox-sideinternal drive shaft for Volkswagen Golf 5
For VW Golf 5 Manual gearbox only :- 2.0 TDI 136hp (AZV)- 2.0 TDI 140hp (BMM, BKD)
Gearbox side (inside), right or left cardan shaft Outside diameter: 108mmNumber of gearbox-side teeth: 28

Inside right or leftcardan shaft on gearbox side 108mm for Volkswagen Golf 6Berline and Variant with 6-speed manual gearbox and 6- or 7-speed DSG dual-clutch automatic gearbox:
Golf 6 Sedan with DSG6 :- 2.0 TDi 110hp (CBDC)- 2.0 TDi 140hp (CJAA)- 2.0 GTi 200hp (CBFA)- 2.5 170hp (CBTA, CBUA)
Golf 6 Sedan with DSG7 gearbox from 03/11/2008 :- 1.4 TFSi 122hp (CAXA)- 1.6 TDi 105hp (CAYC)- 1.6 TFSi 160hp (CAVD, CNWA)
Golf 6 Sedan with 6-speed manual gearbox :- 1.8 TFSi 160hp (CDAA)- 2.0 TDi 136hp (CBAA, CFFA)- 2.0 TDi 140hp (CBAB, CFFB) --> incl. 4motion- 2.0 GTi 200hp (CCTA)- 2.0 GTi 210hp (CCZB)
Golf 6 Variant with DSG6 gearbox :- 2.0 TDi 140hp (CBDB)
Golf 6 Variant with DSG7 gearbox from 03/11/2008 :- 1.2 TFSi 105hp (CBZB)- 1.4 TFSi 122hp (CAXA)- 1.6 TDi 105hp (CAYC) --> including 4Motion- 1.6 TFSi 160hp (CAVD)- 2.0 TFSi 200hp (CCZA)
Golf 6 Variant with 6-speed manual gearbox :- 2.0 TDi 136hp (CBDA, CFHB)- 2.0 TDi 140hp (CFHC)
Technical data :- Assembly side: gearbox side, right or left cardan shaft - Outside diameter: 108mm- Number of gearbox-side teeth: 28
This product is sold individually.

For Audi 80 type 89, 8A
from chassis 89-J-373 599->,
version without ABS:
- 1.9 Diesel 64 hp (1Y)
- 1.6 Diesel 54 hp (JK)
- 1.8 75hp, 88 hp and 90 hp (SF, RU, JN, JV, NE, PM)
- 1.6 70 hp and 75 hp (PP, RN)
- 1.6 Turbo Diesel Intercooler 80 hp (RA, SB)

For Audi 80 type 89, 8A
up to chassis 89-J-373 598,
version without ABS:
- 1.6 Diesel 54 hp (JK)
- 1.6 70 hp and 75 hp (PP, RN)
- 1.6 Turbo Diesel Intercooler 80 hp (RA)
- 1.8 75 hp, 88 hp and 90 hp (SF, RU, JN, JV, NE, PM)

For New Beetle:
- 1.9 TDi 90hp/100hp (ALH, ATD) from 98-> 06/2004
- 1.9 TDi 100hp/105hp (BSW, BEW) from 07/05->

33 teeth cardan shaft diameter 100mm inside right gearbox side with bellows MEYLE for Volkswagen Golf 1 :

Cabriolet :
- 1.8 carburettor from 09/1987
- 1.8 GLI from 08/1984

Supplied with bellows, gasket, screws, nut, washer and circlip.
Clamp on short side of bellows on shaft not included.

This homokinetic spherical seal is intended for the right-hand passenger side.

ATTENTION: On some models, there are 2 possible mountings with 90mm or 100mm nuts. We recommend that you check your mounting before ordering!

33-tooth cardanshaft diameter 100mminside right gearbox side with MEYLE bellows for Volkswagen Golf 3 :
Golf 3 and Vento :- 1.8 75hp and 90hp (engine codes AAM, ANN, ABS, ACC, ANP, ADZ)- 1.9 D 64hp (engine code 1Y)- 1.9 SDI 64hp (engine code AEY)- 1.9 TD 75hp (engine code AAZ)- 2.0 107hp and 115hp (engine codes AEP, 2E, AGG, AKR, ADY)- 2.0 16S 150hp (engine code ABF)
Supplied with bellows, gasket, screws, nut, washer and circlip.Clamp on short side of bellows on shaft not included.
This homokinetic ball joint is intended for the right-hand passenger side.
ATTENTION: On some models, there are 2 possible mountings with 90mm or 100mm nuts. We recommend you check your mounting before ordering!