Heater cable

This valve return spring for heater boxes for 2cv is true to the original.
It ensures the return in place of the valves of the heating boxes for all the models of 2cv and derivatives.

This heater control cable to run between heater boxes for 2cv Van is a quality reproduction.

It is compatible with all 12V 2cv models and derivatives and is installed between the two heating boxes to relay the main cable and control the opening and closing of the left box.

This heater control cable between heat exchangers for AMI6 and AMI8 is a quality reproduction.

It is compatible with all models of 2cv and 12v derivatives and is located between the two heat exchangers to relay the main cable and controls the opening and closing of the left heat exchanger.

This valve return spring for heater boxes for 2cv vans is true to the original.
It ensures the return in place of the valves of the heating boxes for all the 2cv models and derivatives.

Joint for heater cable outlet on rear chassis fork for VW Combi Split from 1950 to 07/1967.

This straight heater control cable narrow clasp for 2cv Van (03/1951-03/1978)is essential for attaching the cable end cap to the heater box.

This heater cable clasp for 2CV is specific to the right hand exchanger, it is compatible with all 2CV models and derivatives.

Heating cable under the rear seat for Old Beetle since 08/72 & 1303

Heater Cable for right side ofleft hand drive
For Transporter T25 with 1600cc CT or CZ engine

This valve return spring for AMI6 and AMI8 heat exchangers is true to the original.
It ensures that the heat exchanger valves on all models of 2cv cars and derivatives return to their initial position.

U-shaped cable to actuate the 2 heater unit levers.
Length: 3,670 mm

For Beetle, 08/1955 ->12/1962
Chassis no. 929 746 ->5 199 979.

Heating control cable for:
- 911 2.7 to 3.3 from 08/1973 to 07/1986

For automatic system.

Length: 4310 mm

- For Kombi Bay Window with T1 engine:
Years: 08/1972 ->
Chassis no.: 213 2000 001 ->

This wide clip of the left heater control cable for DYANE and Acadiane is essential for fixing the cable end onto the heater box.

Specific to the left exchanger, it is compatible with all 2cv models and derivatives

L = 5735 mm

This wide clip on the left-hand heat exchange control cable for AMI6 and AMI8 is essential for securing the cable end cap to the heat exchanger.

Specific to the left heat exchanger and is compatible with all models of 2cv cars and derivatives

This heater control cable to run between heater boxes for DYANE and Acadiane is a quality reproduction.

It is compatible with all 12V 2cv models and derivatives and is installed between the two heating boxes to relay the main cable and control the opening and closing of the left box.

This long heater control cable for Mehari is a quality reproduction.

It is compatible with all 12V 2cv models and derivatives and connects the heating control to the right heating box to control the opening and closing of the right and left boxes.

This Narrow heater control straight cable clamp for Dyane and Acadiane (08/1967-03/1987)is essential for attaching the cable end cap to the heater box.

This heater cable clamp for Dyane and Acadiane is specific to the straight exchanger, it is compatible with all 2CV models and derivatives.

Length: 4316 mm

- For Kombi Bay Window with T1 engine:
Years: 08/1971 ->07/1972
Chassis no.: 212 2000 001 ->212 2300 000

Length: 4400 mm

- For Kombi Bay Window with T1 engine:
Years: 08/1968 ->07/1971
Chassis no.: 219 300 000 ->211 2300 000