Catalytic converter

Pipe diameter: 76.2 mm

Pipe diameter: 63.5 mm

Catalytic converter for Golf 4 & Bora:
- 1.4 16S 75hp (BCA)
- 1.6 16S 105hp (BCB)

Once installed on the vehicle, it may also be necessary to order the manifold outlet reference GC09150or GC09152. These 2 parts are combined in a single original part which cannot be separated

For Audi A3 (8L) up to 2003:
- 1.8 Turbo 150hp and 180hp

For Audi A3 8P Quattro Saloon & SportBack from 2004:
- 3.2 V6 250 hp

Metal catalytic converters (not approved) diameter 70 mm
Can only be assembled with manifold AC50244 + intermediate pipe AC50247.

For Audi TT 8N Coupé/Roadster from 1999 to 2006:
- 1.8L Turbo 180hp
- metal catalytic converter

For Audi TT 8N Quattro Coupé/Roadster from 1999 to 2006:
- 1.8L Turbo 180hp

100% stainless steel, diameter 63.5 mm

Suitable for:
- Audi A3 (8L)
- Audi TT (8N)
Not suitable for Quattro

Exhaust pipe with catalytic converter,

For A3 (8L) with 6-speed manual transmission:
- 1.9 TDi 130hp (ASZ)

These SCART catalysts with 200 cells are suitable for Porsche 911 type 996 phase 1 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001

They replace, thanks to their similar dimensions, the original catalysts. Improved exhaust flow provides better sound and power gain.

Supplied with clamps, seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease.

These SCART catalysts with 200 cells are suitable for Porsche 911 type 996 phase 2 :

- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

They replace, thanks to their similar dimensions, the original catalysts. Improved exhaust flow provides better sound and power gain. They have the 4 sockets for mounting Lambda sensor.

Delivered with straps, seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease.

SCART Sport 100-cell stainless steel catalytic converter for:
- 993 Carrera and Carrera S
- 993 Carrera 4 andCarrera 4 S

For 993 GILLET assembly.

Power gain: 15 bhp
Fuel saving from 0.5 to 1L/100 km

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

SCART stainless steel catalytic with 100 cell cartridge for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992

It replaces the more restrictive original catalytic. By preserving back pressure, this system proves to be more efficient than a bypass. It offers power gain and is ideally combined with a SCART RIVA or a SCART CUP.

You can also mount it with your original central mufler. SCART parts having the same interfaces as the manufacturer parts.

Gain announced :
-> 17 hp on a Porsche 964 full stock
-> -1.5 kg compared to the original catalytic

Delivered with its mounting kit :
- seals
- stainless steel screws
- stainless steel lock nuts
- high temperature copper grease

These Sport 200 cells catalysts are fitted between the manifolds and the connecting tubes to the rear muffler. They are suitable for Porsche Boxster 986 :

- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004
- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004
- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004

Thanks to the improvement made to the flow of gases, its collectors make it possible to obtain a power gain (announced: 10 hp on a Stock basis). Accompanied by the RS60039 muffler with which it has been studied, you will get a more responsive car with an angry sound !

Mounting kit delivered, including :
- Stainless steel screws
- Joints
- Inox brake nuts
- High temperature coppery grease

Pair of SCART catalytic converters for:

- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013

200-cell catalytic converters

SCART Catalytic Converters in stainless steel with 200 cells for better gas flow and more sound. They are suitable for Porsche 911 type 997 phase 1 :

- 997 3.6 Carrera and Carrera 4 from 2005 to 2008
- 997 3.8 Carrera S and Carrera 4 S from 2005 to 2008

By replacing the original 400-cell catalysts, they allow a gain in power. They are assembled without modification.

Supplied with mounting kit

EVOX catalysts in specific stainless steel alloy with 200 cells for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005

They opt for an X-pipe architecture with 55 mm tubing for better engine efficiency.

The weight gain announced compared to the original models is 2.2 kg

Supplied with mounting kit including hardware and seal
Tube diameter : 55 mm

Being a performance part, this exhaust is reserved for use on the circuit only, it does not benefit from CE approval for use on open roads.

EVOX Catalytic Converter 200 cells for better engine performance. They are suitable for the following Porsche 911 type 997 phase 1 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008

Made from a special stainless steel alloy, they opt for an X (X pipe) architecture with 55 mm pipes.

The weight gain announced compared to the original models is 2 kg

Delivered with the mounting kit

Tube diameter : 55 mm

Being a performance part, this exhaust is reserved for use on the circuit only, it does not benefit from CE approval for use on open roads.

Complete Ridex catalytic converter for Mini:
Mini R55 Clubman :
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)

For E36 Saloon, Coupé &Cabriolet:
- M3 3.0 93 ->96
- M3 3.2 96 ->99
409 steel