Wing

For Golf 2 all models 08/1983 ->07/1992
except versions: G60, Rallye, Country.

Right front fender to be painted, without turn signal hole.
Model for inclined headlight, with hole for oval horn grille.

For VW Beetle 1200

Front left wing for Mazda MX5 NA with hole for side indicator

For NA all European models

Replacing a front wing is very simple, there-s no cutting or welding, it just needs bolting to the frame.

Quality adaptable part

For Golf 3 :
- Berline & Break until ->07/95

With rectangular repeater - without antenna hole

This left front wing for Renault 4L (10/1961-01/1994) is a quality reproduction.
Compatible with all models, this 4L rear wing is in stock.
It may have slight defects due to transport.

Front right wing for Mazda MX5 NA with hole for side indicator

For NA all European models

Replacing a front wing is very simple, there-s no cutting or welding, it just needs bolting to the frame.

Quality adaptable part

This right front wing for Renault 4L (10/1961-01/1994) is a quality reproduction.
Compatible with all models, this 4L front wing is in stock.
It may have slight defects due to transport.

For Golf 3 :
- Berline & Break since 08/95->

With oval repeater - without antenna hole

Right front fender for painting, with turn signal hole
model for right headlight, with 20 mm mounting slot

For VW Beetle :
- 1200, 08/1973 ->07/1974
Chassis No. 114 2000 001 ->114 2999 999.
- 1300, 1500, 08/1967-> from chassis No. 118 000 001 -> Cabriolet, 08/1967
- Cabriolet, 08/1967 ->07/1970
Chassis N° 158 000 001 ->150 3100 000.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

For Golf 3 :
- Berline & Break since 08/95->

Wing with oval repeater - without antenne hole

Left front fender to be painted, with turn signal hole
model for right headlight, with 20 mm mounting slot

For VW Beetle :
- 1200, 08/1973 ->07/1974
Chassis No. 114 2000 001 ->114 2999 999.
- 1300, 1500, 08/1967-> from chassis No. 118 000 001 -> Cabriolet, 08/1967
- Cabriolet, 08/1967 ->07/1970
Chassis N° 158 000 001 ->150 3100 000.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

This wing has drill holes for the protective bodyside moulding and the rocker panel strip
Ithas no holes for the indicator repeater nor a lateral mounting hole for theplastic bumper

Repair sheet metal for the left rear fender corner with complete light surround, for models with large bumpers. Very faithful to original quality.

For VW Combi Bay Window
Years: 08/1971 ->07/1979
from chassis N° 212 2000 001->

Right front fender for painting
model with blinker hole and right-hand fitting slot

For VW Beetle 1302

Left front fender to be painted
model with blinker hole and right-hand fitting slot

For VW Beetle 1302

For Golf 3 :
- Berline & Break until ->07/95

Rectangular wing with repeater - No hole antenna

This wing has drill holes for the aerial, the protective bodyside mouldingand the rocker panel strip
It has no holes for the indicator repeater nor a lateral mounting hole for the plastic bumper

Front left-hand wing panel (driver's side) in sheet metal ready for painting, for short front panel with radiator grille and square indicators (AC0) phase 1.

For Transporter T4, from 09/1990 to 12/1995
up to chassis No. ->70-T-199 999.

Driver's side lower leftfender flange for BMW 3 series E30 phase 1 up to 08/1987 :

- 4-door saloon (incl. 4-wheel drive)
- 2-door Coupé (including 4-wheel drive)
- 325i Convertible from 09/1985 to 08/1987

ATTENTION: Not suitable for Touring or M3!

This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment with the bumper and adjustment on the body.

This is an "adaptable" quality part, as it does not come from the manufacturer.

High-quality right front fender for VW Beetle Oval.
Model for inclined headlight, with hole for oval horn grill.
This high-quality reproduction fender is the result of many years' work by BBT.
The stampings on this wing reproduce the true curvature of the original wings of the famous Oval Beetles.
The thickness and curvature of this legendary Oval Beetle fender are of impeccable quality.
The headlight bowl and pass-through tube are no exception to the rule when it comes to quality.

For VW Beetle 1200 Oval and after, 11/1952 ->07/1959
Chassis N° 428 156 ->2 528 667.

Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.