Suspension ball joints

Front suspensionball joint MEYLE OE for Citroën Berlingo II : - Compatible with all Citroën Berlingo II B9 versions from 04/2008 to 06/2018 including 1.6 Blue HDI 112hp. This front axle part offers an optimized quality compared to the original, design defects are corrected, it is stronger for better durability and improved road behavior. Sold individually.

MEYLE OE front suspensionball joint for DS DS3 Coupé and Cabriolet : DS DS3 : - 1.2 THP from 04/2015 to 07/2019 (1199 ccm 110hp)
- 1.2 THP from 09/2015 to 07/2019 (1199 ccm 130hp)
- 1.2 VTi from 04/2015 until 07/2019 (1199 ccm 82hp)
- 1.4 HDi from 07/2015 to 12/2016 (1398 ccm 68hp)
- 1.6 BlueHDi from 04/2015 until 07/2019 (1560 ccm 99hp)
- 1.6 BlueHDi from 07/2015 until 07/2019 (1560 ccm 116hp)
- 1.6 BlueHDi from 07/2015 until 07/2019 (1560 ccm 120hp)
- 1.6 BlueHDi from 07/2015 to 07/2019 (1560 ccm 75hp)
- 1.6 e-HDi from 04/2015 until 07/2019 (1560 ccm 92hp)
- 1.6 THP from 07/2015 until 07/2019 (1598 ccm 150hp)
- 1.6 THP from 07/2015 until 07/2019 (1598 ccm 163hp)
- 1.6 THP from 07/2015 until 07/2019 (1598 ccm 165hp)
- 1.6 THP from 09/2015 until 07/2019 (1598 ccm 208hp)
- 1.6 Vti from 07/2015 to 07/2019 (1598 ccm 120hp) This front axle part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding. Sold individually.

MEYLE OE front suspensionball joint for Peugeot 407: - Compatible with all Peugeot 407 Sedan, Estate(sw) and Coupé versions from 03.2004 to 02/2011 including 3.0 v6. This front axle part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and handling. Sold individually.

Kit of 4 German quality suspension ball joints.
Press-fit.

For Beetle 1200, 1300, 1500 since 08/1965-> from chassis no.
from chassis N° 116 000 001->

You'll need to recover your original eccentrics, or replace them with "CUP" models, part no. VJ51605, for camber adjustment on the upper ball joints when lowering significantly.

Front suspension ball joint
Assembly on lower wishbone
Left or right, sold individually.
Enhanced superior quality.

For VOLKSWAGEN Transporter T4 from 01/1996 to 06/2003 since chassis N° 70-T-200 000->
All models including Synchro (4x4)

Suspension ball joints for upper wishbones & lower
Superior quality reinforced to last longer
ideal for heavy or underslung vehicles, complete kit:
- 2 reinforced upper ball joints Ref. KJ51301HD
- 2 reinforced lower ball joints Ref. KJ51303HD

For Transporter T25/T3, 05/1979 ->07/1992.
All models including Syncro version (4 x 4).

4 Suspension ball joints for upper wishbones & lower
Ideal for repairing your complete front axle:
- 2 upper ball joints original Ref. KJ51301
- 2 lower ball joints original Ref. KJ51303

For Transporter T25/T3, 05/1979 ->07/1992
All models including Syncro version (4 x 4).

Mounting on lower suspension arm
Since Chassis 70-T-200 000 ->

This suspension ball joint repair set, suitable for Porsche 944 phase 2 with lower aluminum wishbones :

- 944 2.5 - 163 hp from 1985 to 1987
- 944 2.5 - 160 hp from 1988
- 944 2.5 S - 190 hp from 1987 to 1988
- 944 2.7 - 165 hp from 1989
- 944 2.5 Turbo 220 hp from 1986 to 1988
- 944 2.5 Turbo S / Cup 250 hp from 1988
- 944 2.5 Turbo 250 hp from 1989 to 1991
- 944 3.0 S2 - 211 hp from 1989 to 1991

This kit of 2 ball joints, offers you the possibility of renovating your wishbones and thus avoiding their expensive replacements, the wear part being mainly the ball joint pin and not the wishbone.

This set includes everything needed to repair reliably and durably.

The notice in English is provided.

This suspension ball joint repair set, suitable for Porsche 968 :

- 968 3.0 from 1992 to 1995
- 968 3.0 Club Sport from 1993 to 1995
- 968 3.0 Turbo S from 1993 to 1994

This kit of 2 ball joints, offers you the possibility of renovating your wishbones and thus avoiding their expensive replacements, the wear part being mainly the ball joint pin and not the wishbone.

This set includes everything needed to repair reliably and durably.

The notice in English is provided.

Suitable for Golf 2 & Jetta 2 from 08/87->

Suitable for Corrado, except VR6

Suitable for Golf 3 (between axes 4 x 100 only, except for GTI & VR6)

Front suspension ball joint
Mount on upper wishbone
Left or right-hand side, sold per unit.

For VW Transporter T4 type 70/7D
09/1990 ->06/2003
All models including Syncro (4 x 4)

Cost-effective replacement for the bellows on the lower suspension ball joint.
Supplied with mounting clips.
Approximate dimensions :
small diameter: 14 mm
large diameter: 32 mm
height: 22 mm

For Beetle with ball-jointed front axle:
models 1200, 1300, 1500.

For VOLKSWAGEN Transporter T5 for laden weight less than 3.2T
MEYLE HD model, reinforced compared with the original.

Left or right, sold individually with attachment screws.

For Golf 1 & Scirocco from 12/77 ->93:
- Golf 1 saloon (from chassis 178 3173 584->)
- Scirocco (from chassis 538 2028 903->)
- Golf 1 cabriolet, Caddy Jetta, Scirocco all models.

Cost-effective replacement for upper ball joint bellows
Supplied with mounting clips
Approximate dimensions :
small diameter: 14 mm
large diameter: 36 mm
height: 24 mm

For Beetle with ball-jointed front axle:
models 1200, 1300, 1500.

Front suspension ball joint
Mount on lower wishbone
Left or right-hand side, sold per unit.

For VW Transporter T4 type70
09/1990 ->12/1995
up to chassis No. ->70-T-199 999.
All modelsincluding Syncro (4 x 4)

This front lower or upper ball joint repair kit will enable you to repair your ball joint before changing it completely.A car suspension ball joint boot is a rubber component designed to protect suspension ball joints from dirt, water, dust and corrosion. It also keeps the lubricating grease inside the ball joints, ensuring their smooth operation and extending their life.If the bellows are cracked, fissured or, worse still, notched, they are no longer acting as protectors and the ball joint may be damaged, making it imperative to replace the protective bellows.This kit includes bellows and bushes.Sold individually
Suitable for VW Combi Bay Window all models from 08/1967 to 07/1979.
Remember the KJ51290 eccentric ring for adjusting the camber of your Combi's front axle, to be repositioned when fitting the new upper ball joint.