Air hoses

Black outer fabric braided hose compatible with oil from -40°C to 110°C, for use in the creation of breathers.

Inside diameter: 12 mm ( /- 0.5mm)
Outside diameter: 17 mm( /- 0.7mm)
Maximum pressure: 7 bar

Hose sold by the meter.
If you order several meters, we deliver them in one piece.

SAMCO SPORT black silicone hose, high quality and temperature resistant up to 200°C.

This hose replaces all air and vacuum hoses, as well as the tank overflow drain on carburetors.

Inside diameter: 3 mm
Wall width: 2 mm
Gloss black finish

SAMCO SPORT high-grade silicone hose, resistant up to 200°C.

Replaces all air and vacuum hoses, as well as carburetor overflow hoses.

Inside diameter: 4 mm
Wall width: 2 mm
Gloss black finish

Sold in 3-meter packs.

SAMCO SPORT hose in very high-quality silicon, heat-resistant up to 200°.
Enables the replacement of all venting and vacuum hoses as well as the drainage of carburettor overflow tanks.
Internal diameter: 3 mm
Wall thickness: 2 mm
Blue gloss finish
Other colours available on special request.

SAMCO SPORT hose in very high-quality silicon, heat-resistant up to 200°.

Enables the replacement of all venting and vacuum hoses as well as the drainage of carburettor overflow tanks.

Internal diameter: 5 mm
Wall thickness: 2.5 mm

Black gloss finish
Sold in 3-metre packs.

SAMCO SPORT very-high quality silicone hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well as the overflow pipe on the carburettors.

Interior diameter: 6.3 mm
Wall width: 2.5 mm

Finish: black gloss

Sold in 3 metre packs.

SAMCO SPORT hose in very high-quality silicon, heat-resistant up to 200°.

Enables the replacement of all venting and vacuum hoses as well as the drainage of carburettor overflow tanks.

Internal diameter: 8 mm
Wall thickness: 3 mm

Black gloss finish

Other colours available on special request
Blue, green, orange, yellow, purple.

Sold in 3-metre packs.

SAMCO SPORT blue 4mm-diameter hose made of high-quality silicone, temperature-resistant up to 200°C.

For long-term replacement of all air and vacuum hoses, as well as carburetor overflow hoses.

Inside diameter: 4 mm
Wall width: 2 mm
Bright blue finish

Sold in 3-meter packs.

SAMCO SPORT very-high quality silicone hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well as the overflow pipe on the carburettors.
Interior diameter: 6.3 mm
Wall width: 2.5 mm
Finish: red gloss

Sold in 3 metre packs.

SAMCO SPORT very-high quality silicon hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well asthe overflowpipe on the carburettors.

Interior diameter: 4 mm
Wall width: 2mm

Finish: black gloss

Other colours available by special request
Blue, red, green, orange, yellow, purple.

Sold in 3 metre packs.

SAMCO SPORT very-high quality silicone hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well as the overflow pipe on the carburettors.

Interior diameter: 5 mm
Wall width: 2.5 mm

Finish: black gloss
Sold in 3 metre packs.

SAMCO SPORT silicone hose, high quality and resistant up to 200°C.

This hose is a durable replacement for all air andvacuum hoses, as well as for carburetor overflow drains.

Inside diameter: 3mm
Wall width: 3 mm
Gloss red finish

SAMCO SPORTvery-high quality silicone hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well as the overflow pipe on the carburettors.

Interior diameter: 8 mm
Wall width: 3 mm

Finish: black gloss

Sold in 3 metrepacks.

SAMCO SPORT very-high quality silicone hose, resistant up to 200 °C.

Can replace all venting and vacuum hoses as well as the overflow pipe on the carburettors.
Interior diameter: 6.3 mm
Wall width: 2.5 mm
Finish: blue gloss

Sold in 3 metre packs.

SAMCO SPORT hose in very high-quality silicon, heat-resistant up to 200°.

Enables the replacement of all venting and vacuum hoses as well as the drainage of carburettor overflow tanks.

Internal diameter: 5 mm
Wall thickness: 2.5 mm

Blue gloss finish

Sold in 3-metre packs.

SAMCO SPORT hose in very high-quality silicon, heat-resistant up to 200°.

Enables the replacement of all venting and vacuum hoses as well as the drainage of carburettor overflow tanks.

Internal diameter: 8 mm
Wall thickness: 3 mm

Blue gloss finish.

Sold in 3-metre packs.

Vacuum hose for Volkswagen Golf 3
For VW Golf 3 : - 2.8 VR6 174hp (AAA)
Genuine Volkswagen part

Air intake hose on the air filter housing for VOLKSWAGEN Transporter T25 from 1980 to 1992, Pickup version only:
- 1.6 Diesel 50hp (CS)
- 1.7 Diesel 57hp (KY)

Intermediate turbo hose between throttle and intercooler for VW Transporter T5 from 2005 to 2010 from chassis n°WV1ZZZ7HZ5-000001 or n°WV1ZZZ7JZ5-000001 to chassis n°WV1ZZZ7HZA-050000 or n°WV1ZZZ7JZA-010000 :
- 1.9 TDi 84hp (BRR)
- 1.9 TDi 85hp (AXC)
- 1.9 TDi 102hp (BRS)
- 1.9 TDi 105hp (AXB)
- 2.5 TDi 130hp (AXD)
- 2.5 TDi 131hp (BNZ)
- 2.5 TDi 163hp (BLJ)
- 2.5 TDi 174hp (AXE, BPC)

Intake manifold to accelerator unit cooling hose for Mazda MX5 NA

For NA 1.6L 90hp and 115hp

Connects accelerator unit to intake manifold

Genuine Mazda part